SMOK RPM Replacement Coils 5 Pack

SMOK RPM Coils

The SMOK RPM Replacement Coils are the original RPM coil series, compatible with a wide range of SMOK RPM and Nord pod devices including the RPM40, RPM80, Fetch Pro, Nord 2, and Nord 4. There are six variants available, covering everything from tight mouth-to-lung draws at low wattage through to direct-to-lung vaping at up to 25W. Each pack contains five coils.

The coils use a press-fit plug-and-play system: they push directly into the base of an RPM pod and lock in place without any threading. If you are searching for SMOK RPM coils or Fetch Pro coils, this is the correct page. If you are looking for SMOK RPM 5 coils, those are a different product entirely and require RPM 3 series coils, not these.

SMOK RPM Replacement Coils 5 Pack Key Features

• Six coil variants covering MTL through to DTL
• Wattage range: 10W to 25W across the series
• Compatible with RPM40, RPM80, Fetch Pro, Nord 2, Nord 4, and more
• Press-fit plug-and-play installation
• Suits nic salts, 50/50, and high VG e-liquids depending on variant
• Pack of 5

0.4ohm RPM Mesh Coil

• Resistance: 0.4ohm
• Wattage: rated 25W
• Draw style: DTL (direct-to-lung)
• Build: single Kanthal mesh with honeycomb configuration
• E-liquid: high VG, 60% VG minimum; 70%+ recommended. Not suitable for nic salts
• Best for: cloud production and strong flavour at higher wattage; the most popular variant in the RPM range

0.6ohm RPM Triple Coil

• Resistance: 0.6ohm
• Wattage: rated 25W
• Draw style: restricted DTL
• Build: triple Ni-Cr parallel coil configuration
• E-liquid: high VG, 60%+; suitable for lower nic strengths (3mg or 6mg freebase). Not ideal for nic salts at this wattage
• Best for: fast ramp-up time, strong vapour production, and vapers who want the triple coil output at a mid-range resistance

0.3ohm RPM MTL Mesh Coil

• Resistance: 0.3ohm
• Wattage: 10 to 15W
• Draw style: MTL (mouth-to-lung)
• Build: single mesh coil optimised for low-wattage mouth-to-lung draw
• E-liquid: works with 50/50 and high VG at these lower wattages; also suitable for nic salts (10mg or 20mg)
• Best for: vapers who prefer an MTL draw but want mesh flavour quality; also useful for those on nic salts who need a tighter draw at low power

0.8ohm RPM DC MTL Coil

• Resistance: 0.8ohm
• Wattage: rated 16W
• Draw style: MTL (mouth-to-lung)
• Build: dual-coil MTL configuration (DC MTL)
• E-liquid: 50/50 or higher PG; works well with nic salts (10mg or 20mg)
• Best for: MTL vapers who want a dual-coil setup with a slightly warmer vape than the 0.3 mesh and good nic salt compatibility

1.0ohm RPM SC Coil

• Resistance: 1.0ohm
• Wattage: rated 14W
• Draw style: MTL (mouth-to-lung)
• Build: single Ni-Cr coil
• E-liquid: 50/50 or higher PG; excellent with nic salts (10mg or 20mg)
• Best for: intense flavour from nic salts; the tightest draw in the RPM range and the best option if you are searching for the best RPM coil for salt nic

1.2ohm RPM Quartz Coil

• Resistance: 1.2ohm
• Wattage: rated 12W
• Draw style: MTL (mouth-to-lung)
• Build: single quartz core
• E-liquid: 50/50 or higher PG; works with nic salts
• Best for: vapers who want a very clean, pure flavour; the quartz core does not impart any heat signature on the taste, so it suits those sensitive to coil flavour

Device Compatibility

These are original SMOK RPM series coils, designed for use with RPM pods across a wide range of SMOK kit and pod systems. They are not compatible with RPM 2 pods, Nord pods, or LP2 pods, which use different coil platforms. If you are searching for SMOK Fetch Pro coils or Nord 4 coils and your device uses the RPM pod, these are the correct coils. Note that some devices (such as the Nord 4) accept both RPM and Nord coils via different pod versions; check which pod type you are using before ordering.

• SMOK RPM40 Kit
• SMOK RPM80 Kit
• SMOK RPM80 Pro Kit
• SMOK RPM Lite Kit
• SMOK Fetch Mini Kit
• SMOK Fetch Pro Kit (RPM pod only; Fetch Pro Nord pod uses RGC coils)
• SMOK Nord 2 Kit (RPM pod version)
• SMOK Nord 4 Kit (RPM pod version)
• SMOK Nord X Kit (RPM pod version)
• SMOK Nord 50W Kit (RPM pod version)
• SMOK Scar-P3 Kit
• SMOK Scar-P5 Kit
• SMOK Alike Kit
• SMOK Morph Pod-40 Kit
• SMOK IPX80 Kit
• SMOK Pozz X Kit
• SMOK Thallo / Thallo S Kit

Not compatible with: RPM 2 pods, RPM 4 pods, RPM 5 (uses RPM 3 coils), Nord pods, or LP2 pods.

What's in the Box

• 5 x SMOK RPM Replacement Coils (in your chosen variant)