VOOPOO Argus Top Fill V2 Pod Cartridges

VOOPOO Argus V2 Pods

The VOOPOO Argus Top Fill Cartridge V2 is the upgraded replacement pod for the VOOPOO Argus range of vape kits, sold in a pack of three. Each pod holds 2ml of e-liquid in line with UK TPD regulations and uses a top-side filling port covered by a silicone stopper for quick, clean refills without removing the pod from the device. The V2 cartridge introduces iCOSM CODE 2.0 technology, which brings three meaningful improvements over the original: greater leak resistance, more consistent flavour delivery, and a significantly longer coil lifespan.

Available in 0.4, 0.7, and 1.0 Ohm resistances, these Argus V2 pods suit both mouth-to-lung and restricted direct-to-lung vaping. The PCTG body is transparent throughout, so you can see your liquid level at a glance.

VOOPOO Argus Top Fill V2 Pods Key Features

• 2ml e-liquid capacity (TPD compliant)
• Top-side filling port with silicone stopper
• iCOSM CODE 2.0 technology
• Golden Cotton coil material: up to 100ml lifespan
• Copper chamber liquid-seal shield: 83% improved leak resistance
• Three resistance options: 0.4 Ohm, 0.7 Ohm, 1.0 Ohm
• Built-in mesh coil
• Magnetic pod connection
• Transparent PCTG construction
• Compatible with the full VOOPOO Argus kit range

2ml E-Liquid Capacity

Each Argus V2 pod holds 2ml of e-liquid, the maximum capacity permitted under UK TPD regulations. The fully transparent PCTG body makes it straightforward to check the liquid level without removing the pod from the device. Most vapers find a single pod lasts between one and two weeks, though this varies depending on how frequently you vape and which resistance you use.

Top-Side Filling Port

The fill port sits on the top face of the cartridge and is sealed with a firm silicone stopper. To refill, press the stopper to one side, insert your bottle nozzle, fill to the 2ml line, and press the stopper back into place. You do not need to remove the pod from the device to do this. The top-side position keeps the fill port well clear of the airflow inlets at the base, which helps reduce the chance of spillage entering the device.

iCOSM CODE 2.0 Technology

iCOSM CODE 2.0 is VOOPOO's proprietary atomisation system built into the V2 cartridge. At its core is a self-developed copper chamber that creates a dense e-liquid film coating 99% of the cotton, maintaining consistent air pressure throughout the pod's life. This construction is three times denser than conventional coil designs and raises leak resistance by up to 83% compared to the original Argus Top Fill Cartridge. The result is a pod that stays cleaner for longer, produces more consistent flavour from first fill to last, and is less prone to dry hits as the e-liquid level drops.

Golden Cotton: Up to 100ml Coil Lifespan

The V2 cartridge uses aerospace-grade Golden Cotton as its coil wicking material. This cotton is heat-resistant to 260°C, which is 73% higher than the 150°C threshold of standard vape cotton. The higher heat tolerance means the cotton resists burning even when wattage is pushed toward the upper end of the recommended range. VOOPOO rates each V2 pod for up to 100ml of e-liquid usage, which is a significant step up from the original cartridge. In practical terms, a three-pack will comfortably last most vapers through several weeks of regular use.

Three Resistance Options: 0.4 Ohm, 0.7 Ohm, 1.0 Ohm

Choose the resistance that matches your preferred vaping style:

• 0.4 Ohm: Restricted direct-to-lung (RDTL) vaping. Best run at 18 to 30W. Produces more vapour and a warmer draw. Recommended with freebase or nic salt e-liquids.
• 0.7 Ohm: The most versatile option. Mouth-to-lung vaping at 14 to 18W. A well-balanced choice for everyday use and works well with nic salts.
• 1.0 Ohm: Tight mouth-to-lung draw at 10 to 14W. Best paired with higher-strength nic salts and suits vapers transitioning from cigarettes.

Built-In Mesh Coil

The coil is built directly into the V2 pod cartridge rather than installed as a separate component. Mesh coil construction heats e-liquid across a wider surface area than traditional wire coils, which promotes more even vapour production and consistent flavour output. When the coil reaches the end of its useful life, you replace the entire pod. There is no coil to unscrew, prime separately, or dispose of individually.

Copper Chamber Liquid-Seal Shield

The copper chamber inside the V2 pod forms a protective e-liquid film that coats the cotton and maintains stable air pressure during use. This liquid-seal approach is the main structural difference between the V2 and the original Argus Top Fill Cartridge. It reduces the internal pressure fluctuations that typically cause e-liquid to seep past the seals, which is why VOOPOO rates the V2 for 30-day leak-free performance under normal conditions. Keeping the pod upright when not in use and avoiding overfilling beyond the 2ml mark will help maintain this over the life of the cartridge.

Magnetic Pod Connection

The V2 cartridge connects to the device via a built-in magnet, so the pod drops into place without any fiddling or pressing. The connection holds the pod securely during use and prevents it from working loose in a pocket. Removing the pod for a refill or swap requires nothing more than a light pull, and it comes free cleanly every time.

Transparent PCTG Construction

PCTG is a food-safe, impact-resistant plastic that is widely used in vape pod manufacturing because it stays clear over time and does not discolour or react with PG or VG-based e-liquids. The fully transparent body of the V2 cartridge means the liquid level is always visible from the outside. It also keeps the overall weight of the pod low, adding very little to the feel of the device when fitted.

VOOPOO Argus V2 Pod Compatibility

The VOOPOO Argus Top Fill Cartridge V2 is compatible with the following Argus kits:

• Argus
• Argus G
• Argus G2
• Argus G2 Mini
• Argus G3
• Argus G3 Mini
• Argus P1
• Argus P1s
• Argus P2
• Argus P3
• Argus Z
• Argus Z2
• Argus Klyc
• Argus Matrix
• Argus A

If you are unsure whether your specific kit is compatible, check the device's original box or product listing, as the Argus range has grown considerably and compatibility can vary by resistance.

Recommended E-Liquids

VOOPOO recommends using the Argus V2 pods with e-liquids that have a 50% PG ratio or higher, which covers most nic salt 10ml bottles and standard 50/50 freebase liquids. Higher-PG liquids wick more efficiently through the Golden Cotton, keeping the coil saturated between draws. High-VG shortfills are not recommended, as their thicker consistency can struggle to wick quickly enough and may shorten coil life. For vapers switching from cigarettes or disposable vapes, 10mg or 20mg nic salt paired with the 0.7 Ohm or 1.0 Ohm pod gives a close, satisfying draw.

What's in the Box

• 3 x VOOPOO Argus Top Fill Cartridge V2 (with built-in mesh coil)

Each pod arrives ready to fill. Allow five minutes after filling before vaping to ensure the Golden Cotton is fully saturated.