Vaporesso Luxe XR Replacement Pods

Vaporesso Luxe XR Pods

Vaporesso Luxe XR replacement pods are empty refillable pods that accept replaceable GTX coils, sold in packs of two with no coil included. They come in two types: an MTL pod for tighter draws and a DTL pod for looser, cloudier vaping. Each pod holds 2ml under UK TPD regulations and fills from the bottom through a silicone stopper.

GTX coils press-fit into the pod in seconds, so you only replace the coil when it wears out rather than the entire pod. The Luxe XR pods fit every device in the Luxe X family, including the Luxe X, X2, X3, X Pro, XR, XR Max, and XR Max 2.

Luxe XR Pod Key Features

• MTL pod for 0.8 and 1.2 ohm GTX coils
• DTL pod for 0.2 to 0.6 ohm GTX coils
• Replaceable GTX coils with press-fit installation
• 2ml capacity with bottom-fill silicone stopper
• SSS leak-resistant technology
• Transparent PCTG construction with magnetic connection
• Compatible with all seven Luxe X family devices
• How to install coils and fill XR pods
• E-liquid recommendations by coil resistance

MTL Pod for 0.8 and 1.2 Ohm GTX Coils

The Luxe XR MTL pod has a narrow airway for a tight draw similar to a cigarette. It accepts the 0.8 ohm GTX Mesh coil (12-20W) and the 1.2 ohm GTX Mesh coil (7-11W). Both produce modest vapour with strong throat hit and concentrated flavour. Best suited to 50/50 VG/PG nicotine salt e-liquids at 10mg or 20mg.

DTL Pod for 0.2 to 0.6 Ohm GTX Coils

The Luxe XR DTL pod has a wider airway for a looser draw with more vapour. It accepts the 0.2 ohm GTX Dual Mesh (45-60W), 0.3 ohm (32-45W), 0.4 ohm (26-32W), and 0.6 ohm (20-30W) GTX coils. The 0.6 ohm coil also works well for restricted DTL (RDL) vaping. The 0.2 ohm coil needs 45W or more, so it only runs properly on the XR Max and XR Max 2.

Replaceable GTX Coils with Press-Fit Installation

GTX coils push into the base of the pod without threading or twisting. Pull the old coil out, drop the new one in, and press firmly until it clicks. Because you replace only the coil and not the pod, the XR system costs less to run over time than built-in coil pods. GTX coils are sold separately in packs of five.

2ml Capacity with Bottom-Fill Silicone Stopper

Each pod holds 2ml of e-liquid under UK TPD regulations. The fill port is on the bottom, sealed with a silicone stopper that pulls out for refilling. The transparent PCTG body lets you check the e-liquid level without removing the pod from the device.

SSS Leak-Resistant Technology

Vaporesso's SSS design uses three sealing points at the coil seat, fill stopper, and pod-to-device connection to keep e-liquid contained. This is particularly useful on replaceable coil pods, where the coil junction can be a weak point for leaks on other brands. Always check the coil is fully seated and the fill stopper is firmly closed after refilling.

Transparent PCTG Construction with Magnetic Connection

The pod is made from food-grade PCTG plastic that is durable and does not affect e-liquid flavour. It connects magnetically to the device for a secure fit and easy removal. The pod sits flush with the top of the device for a clean look.

Compatible with All Seven Luxe X Family Devices

Luxe XR pods fit the following devices using the same magnetic connection:

• Vaporesso Luxe X
• Vaporesso Luxe X2
• Vaporesso Luxe X3
• Vaporesso Luxe X Pro
• Vaporesso Luxe XR
• Vaporesso Luxe XR Max
• Vaporesso Luxe XR Max 2

The 0.4 ohm coil and above work on every device in the range. The 0.2 ohm coil needs 45W or more, so it suits only the XR Max and XR Max 2. Luxe XR pods are not compatible with XROS or Luxe Q devices.

How to Install Coils and Fill XR Pods

• Press a new GTX coil into the base of the pod until it clicks
• Turn the pod upside down and pull the silicone fill stopper out
• Fill to just below the top of the port
• Press the stopper firmly back in
• Leave for five minutes before your first vape so the cotton saturates

E-Liquid Recommendations by Coil Resistance

• 0.2 to 0.4 ohm DTL coils: 70% VG or higher freebase e-liquid at 3mg or 6mg
• 0.6 ohm RDL coil: 50/50 or 60/40 VG/PG with freebase at 6mg or nic salts at 10mg
• 0.8 and 1.2 ohm MTL coils: 50/50 VG/PG with nicotine salts at 10mg or 20mg

Luxe XR Pod Variants

• Luxe XR Empty Pod - MTL (fits 0.8 and 1.2 ohm GTX coils) - 2 pack
• Luxe XR Empty Pod - DTL (fits 0.2, 0.3, 0.4, and 0.6 ohm GTX coils) - 2 pack

What's in the Box

• 2 x Vaporesso Luxe XR empty replacement pods (selected variant, no coil included)

GTX coils are sold separately and must be installed before use.