Vaporesso Luxe X2 Pod Kit

Vaporesso Luxe X2 Pod Vape Kit

The Vaporesso Luxe X2 is a compact refillable pod kit designed for MTL and restricted DTL vaping. It runs a 2000mAh built-in battery with up to four days of use at lower power, and outputs up to 40W through the AXON chipset. Two Luxe COREX 2.0 mesh pods are included: a 0.6 ohm for RDTL and a 0.8 ohm for MTL, both with 2ml capacity, bottom fill, and built-in coils. 

The Luxe X2 supports both draw-activated and button-activated firing, has a sliding airflow adjuster on the side for precise control, and is compatible with all Luxe X pods and Luxe XR empty pods with GTX coils. Available in eight colours with a zinc alloy chassis and transparent panel design.

Luxe X2 Key Features

• 2000mAh built-in battery with USB-C charging
• Up to 40W output with AXON chipset
• Draw-activated and button-activated firing
• Sliding airflow adjuster for MTL to RDTL
• COREX 2.0 mesh pods with built-in coils
• 2ml bottom-fill pods with SSS leak-resistant technology
• Compatible with all Luxe X pods and Luxe XR pods with GTX coils
• LED battery indicator
• Eight colours in two finishes
• Redesigned thinner mouthpiece for MTL

2000mAh Built-In Battery with USB-C Charging

The Luxe X2 uses an ultra-high-density battery cell that fits 2000mAh into the same compact body size as the original Luxe X, which had a 1600mAh cell. Vaporesso claims up to four days (96 hours) of use from a single charge when vaping at MTL wattages with the 0.8 ohm pod. Heavier use with the 0.6 ohm pod at RDTL settings will reduce this, but most vapers should still get a full day or more. The USB-C port is on the bottom of the device and charges at 5V/1.5A. The device measures 101 x 31.4 x 21.5mm and fits comfortably in a pocket.

Up to 40W Output with AXON Chipset

The AXON chipset manages power output automatically based on the pod resistance, so there is no manual wattage adjustment on the Luxe X2. This keeps the device simple to use: insert a pod and vape. The chipset delivers up to 40W and includes standard safety protections. Because the wattage is automatic, the Luxe X2 is well suited to beginners or anyone who prefers a straightforward vape without settings to adjust. Five clicks of the fire button turns the device on or off.

Draw-Activated and Button-Activated Firing

The Luxe X2 offers both firing modes. Draw activation means you simply inhale on the mouthpiece to produce vapour, which is the most natural option for anyone switching from cigarettes or disposables. Button activation uses the fire button on the front panel and gives you more control over when the coil heats. Both modes are always available, so you can switch between them without changing any settings. Three clicks of the fire button locks the device to prevent accidental firing in your pocket.

Sliding Airflow Adjuster for MTL to RDTL

The airflow adjuster is a sliding switch on the side of the Luxe X2, marked "Air Sys", with three different-sized airflow holes. Slide it fully closed for a tight MTL draw that is close to the feel of a cigarette. Open it gradually for a looser draw, and fully open for an RDTL pull with more vapour. The slider has enough resistance that it will not move accidentally in your pocket, but it is still easy to adjust with your thumb during use. This is a significant upgrade over the original Luxe X, which only offered two fixed airflow positions based on pod orientation.

COREX 2.0 Mesh Pods with Built-In Coils

The Luxe X2 comes with two pods that use COREX 2.0 technology, an upgrade over the original COREX system. COREX 2.0 features an improved Morph Mesh heating element and upgraded COREX Cotton wicking, paired with the AXON chipset for more consistent flavour output over the life of the pod. The coils are built into each pod and cannot be replaced separately, so when the coil is finished you swap the entire pod for a new one. The 0.6 ohm mesh pod (pre-installed) suits RDTL vaping with a relaxed draw and moderate vapour. The 0.8 ohm mesh pod (in the box) is designed for MTL vaping with a tighter draw and less vapour.

2ml Bottom-Fill Pods with SSS Leak-Resistant Technology

Each pod holds 2ml of e-liquid and fills from the bottom through a silicone stopper. Pull the stopper out, insert your bottle nozzle, fill to just below the top of the fill port, and replace the stopper. Vaporesso's SSS leak-resistant technology is built into the pod design to reduce leaking during filling and normal use. The pods are made from transparent PCTG plastic, so you can see your e-liquid level at a glance. Before your first vape on a new pod, fill it and leave it to soak for around five minutes so the wicking material can absorb the e-liquid fully.

Compatible with All Luxe X Pods and Luxe XR Pods with GTX Coils

The Luxe X2 is not limited to the two included COREX 2.0 pods. It is compatible with all Luxe X series built-in coil pods, including any 0.4, 0.6, and 0.8 ohm options from the wider range. It also accepts Luxe XR empty pods, which use replaceable GTX coils from 0.4 to 1.2 ohm. This means you can use the Luxe X2 as both a simple pod device (with built-in coil pods) and a more flexible setup (with GTX coil pods where you only replace the coil, not the whole pod). Keep in mind that the 40W maximum output means lower resistance GTX coils such as 0.15 and 0.3 ohm are not practical on this device. The Luxe X2 is part of the Luxe X platform and is not compatible with XROS pods, which are a separate system.

LED Battery Indicator

The Luxe X2 does not have a traditional screen or wattage display. Instead, a small LED window on the front shows the Vaporesso logo in three colours to indicate battery level. Green means 70% to 100% charge, blue means 30% to 70%, and red means 0% to 30%. This traffic-light system gives you a quick visual check without needing to navigate any menus. The LED lights up briefly each time you take a draw or press the fire button.

Eight Colours in Two Finishes

The Luxe X2 is available in eight colours. The front panel features a textured plate that varies between a leather-look finish and a smooth finish depending on the colour. All eight share the same zinc alloy chassis with a transparent panel on the rear that shows the internal design of the device. The colour options cover a wide range from neutral tones to bolder choices, including the distinctive Wasp Yellow.

Redesigned Thinner Mouthpiece for MTL

Vaporesso has redesigned the mouthpiece on the Luxe X2 pods to be thinner and more contoured to the shape of your mouth than previous Luxe X pods. The slimmer profile feels more natural for MTL vaping, where a comfortable lip seal matters for a satisfying draw. The mouthpiece is integrated into each pod, so it is replaced every time you fit a new pod. This is a noticeable improvement if you have used older Luxe X pods and found the mouthpiece too wide for tight MTL.

Luxe X2 Colours

• Night Black
• White Silver
• Navy Blue
• Wasp Yellow
• Light Pink
• Light Purple
• Avocado Green
• Ruby White

What's in the Box

• 1 x Vaporesso Luxe X2 device
• 1 x Luxe X Series 0.6 ohm mesh pod (pre-installed)
• 1 x Luxe X Series 0.8 ohm mesh pod
• 1 x USB-C cable
• 1 x User manual and warranty card
• 1 x Reminder card

For both included pods, 50/50 VG/PG e-liquids and nicotine salts at 10mg or 20mg are recommended. The 0.6 ohm pod also works with 60/40 VG/PG blends if you prefer slightly more vapour.