OXVA Xlim V3 Top Fill Replacement Pods

OXVA XLIM V3 Pods

The OXVA XLIM V3 Top Fill Replacement Pods are the latest refillable pods for the XLIM series, upgraded from the older V2 design with a new top-fill port that lets you refill without removing the pod from your device.

They are available in four resistance options (0.4 ohm, 0.6 ohm, 0.8 ohm, and 1.2 ohm) to suit both mouth-to-lung and restricted direct-to-lung vaping styles, and each pod features a built-in mesh coil, so there are no separate coils to buy or swap.

You can choose between the standard 2ml pods or the XL 3ml version for longer vaping between refills, with both sizes available in all four resistances.

Sold in packs of three, the XLIM V3 pods fit the full range of OXVA XLIM kits apart from the XLIM C. Whether you are replacing a worn pod on your XLIM Pro, XLIM SQ Pro 2, or any other device in the series, these are the standard replacement pods you need.

OXVA XLIM V3 Pods Key Features

• Top-fill design with silicone stopper
• Built-in mesh coils in 0.4, 0.6, 0.8, and 1.2 ohms
• Available in 2ml and 3ml XL capacity
• Anti-leak construction with UniTech 2.0 technology
• PCTG body with transparent viewing window
• Magnetic pod connection
• Compatible with all XLIM series kits (except XLIM C)
• Works with nic salts and freebase e-liquids
• No coil changes required

Top-Fill Design with Silicone Stopper

The V3 pods use a top-fill system that is a clear step up from the side-fill port on the older V2 pods. To refill, simply lift the silicone stopper on the top of the pod, add your e-liquid, and press the stopper back down. You do not need to remove the pod from your device to top up, which makes refilling quicker and less messy.

The sealed stopper helps prevent leaks, though it is worth pressing it firmly back into place after each fill to keep things airtight.

Built-In Mesh Coils in Four Resistances

Each XLIM V3 pod has a fixed mesh coil built in, so when the coil reaches the end of its life, you simply replace the whole pod with a fresh one. The mesh design heats e-liquid quickly and evenly, producing a strong flavour from the first puff.

Four resistance options are available: 0.4 ohm for a warmer restricted lung hit at 26 to 30W, 0.6 ohm for a balanced draw at 15 to 20W, 0.8 ohm for a smooth mouth-to-lung vape at 10 to 15W, and 1.2 ohm for a tight, cigarette-style pull at 8 to 12W.

All four resistances are available in both the 2ml and 3ml XL pod sizes. The 0.4 ohm pod supports a maximum output of 30W and is compatible with the XLIM Pro, XLIM SE 2 and XLIM SQ Pro kits.

Available in 2ml and 3ml XL Capacity

The standard XLIM V3 pods hold 2ml of e-liquid, in line with UK TPD regulations. For vapers who want to go longer between refills, the XL version holds 3ml while using the same mesh coils, the same top-fill system, and the same magnetic connection.

Both sizes fit all compatible XLIM devices, so you can choose whichever suits your daily routine. The 3ml XL pods are particularly useful if you vape frequently throughout the day and prefer fewer interruptions to top up.

Anti-Leak Construction with UniTech 2.0 Technology

OXVA has improved the sealing on the V3 pods compared to earlier versions, incorporating their UniTech 2.0 coil technology. This features a five-layer cotton arrangement wrapped around the mesh coil for rapid e-liquid absorption and consistent wicking.

The top-fill silicone stopper and internal construction work together to keep e-liquid where it should be, reducing the risk of leaks into the device or out of the fill port. Making sure the stopper is fully seated after filling goes a long way towards keeping things clean.

PCTG Body with Transparent Viewing Window

The pods are made from PCTG plastic, which is lightweight, durable, and food-safe. A transparent section on the side of the pod lets you see your e-liquid level at a glance, so you know when it is time to top up. Keeping the pod topped up is important because letting it run dry can burn the coil prematurely, shortening the life of the pod.

Magnetic Pod Connection

The XLIM V3 pods attach to your device using magnets. They click into place securely and can be removed in a second when you need to swap to a different resistance or replace a used pod. The magnetic fit is firm enough that the pod will not come loose during normal use, even if you carry your device in a pocket or bag. Both the 2ml and 3ml XL pods use the same magnetic fitting, so switching between the two sizes is straightforward.

Compatible with All XLIM Series Kits (Except XLIM C)

One of the best things about OXVA's XLIM range is the cross-compatibility between pods and devices. The V3 top fill pods work with the XLIM, XLIM SE, XLIM SE 2, XLIM SQ, XLIM SQ Pro, XLIM SQ Pro 2, XLIM Pro, XLIM Pro 2, XLIM Pro 2 DNA, XLIM Pro 3, XLIM Go, and XLIM Go 2. The only exception is the XLIM C, which uses a different pod fitting. If you own more than one XLIM device, the same pack of pods will work across all of them.

Works with Nic Salts and Freebase E-Liquids

All four resistance options handle both nicotine salt and freebase e-liquids well. A 50/50 VG/PG blend is recommended for the best wicking and flavour. The 0.8 ohm and 1.2 ohm pods pair particularly well with nic salts at 10mg or 20mg strength, while the 0.4 ohm and 0.6 ohm pods suit freebase liquids at lower nicotine strengths for a warmer, fuller draw.

When using a new pod for the first time, fill it and let it stand for two to five minutes before vaping so the wick can fully saturate.

No Coil Changes Required

Because the coil is built into the pod, there is no need to buy or fit separate replacement coils. When you notice a drop in flavour, a burnt taste, or reduced vapour production, simply remove the old pod and click in a new one.

This makes the XLIM V3 pods a particularly straightforward option for newer vapers or anyone who prefers to keep things simple. Most users find a single pod lasts between one and two weeks of regular use, with some getting up to 20 refills before the flavour starts to fade.

OXVA XLIM V3 Pod Variants

• 0.4 ohm 2ml (restricted direct-to-lung, 26 to 30W)
• 0.4 ohm 3ml XL (restricted direct-to-lung, 26 to 30W)
• 0.6 ohm 2ml (restricted direct-to-lung, 15 to 20W)
• 0.6 ohm 3ml XL (restricted direct-to-lung, 15 to 20W)
• 0.8 ohm 2ml (mouth-to-lung, 10 to 15W)
• 0.8 ohm 3ml XL (mouth-to-lung, 10 to 15W)
• 1.2 ohm 2ml (tight mouth-to-lung, 8 to 12W)
• 1.2 ohm 3ml XL (tight mouth-to-lung, 8 to 12W)

What's in the Box

• 3 x OXVA XLIM V3 Top Fill Replacement Pods (chosen resistance and capacity)

Each pack contains three pods in your selected resistance and size. E-liquid is not included and will need to be purchased separately.