Lost Vape Centaurus Boro Tank

Lost Vape Centaurus RBA Boro Tank

The Lost Vape Centaurus Boro Tank is a rebuildable RBA boro tank designed for vapers who prefer to build and wick their own coils rather than use pre-made replacements. It fits directly into the Centaurus B60 and Centaurus B80 AIO mods and is also compatible with most standard boro mods and AIO systems.

The tank is built from stainless steel and PCTG, with a single coil build deck using two posts and open terminal design, making it straightforward for both first-time builders and more experienced vapers. Three interchangeable airflow pins are included, covering 1mm, 2mm, and 3mm apertures, so you can set your draw from a tight MTL through to a loose DTL. The tank uses a side-fill design and holds 2ml of e-liquid in the UK TPD version.

Centaurus Boro Tank Key Features

• Rebuildable RBA build deck, single coil
• Two-post, open terminal deck with flathead screws
• Three interchangeable airflow pins: 1mm, 2mm, 3mm
• 3mm pin pre-installed for an open DTL draw
• Side-fill, leak-proof design
• 2ml capacity (UK TPD)
• Stainless steel and PCTG construction
• Compatible with Centaurus B60, B80, and most standard boro mods
• Dimensions: 39 x 25 x 16mm
• Available in 3 colours

RBA Single Coil Build Deck

The Centaurus Boro Tank has a single coil build deck with two posts and open terminal clamps, secured by flathead screws. The post spacing and deck size suit a wide range of coil types, from simple round wire single coils to Claptons and basic fused builds. The wicking ports are large and accessible from both the underside and sides of the deck, making it relatively easy to get cotton placement right on a first attempt. Lost Vape designed this deck with beginners in mind, so the tolerances are generous and the process is forgiving compared to more complex RDA or RTA decks.

Three Interchangeable Airflow Pins

The tank comes with three swappable airflow pins with inner diameters of 1mm, 2mm, and 3mm. The 3mm pin is pre-installed and gives a loose, open DTL draw. The 2mm pin tightens things up to a restricted DTL or RDL, and the 1mm pin produces a tight draw suited to MTL builds at lower wattages. Changing the pin involves partially disassembling the tank, so it is worth choosing your preferred pin before building rather than switching it afterwards. The 1mm and 2mm pins require an O-ring to be fitted from the spares bag before use. This is not always made clear in the box instructions, so check the spares bag and fit the O-rings before inserting the smaller pins to avoid flooding your mod.

Side-Fill and Leak-Proof Design

The Centaurus Boro Tank fills from the side, with the fill port accessible without removing the tank from the mod in most setups. The design uses a press-fit connection into the boro housing of the mod, with the tank sealing against the internal airflow path. Lost Vape built a leak-proof arrangement into the tank that prevents e-liquid from pooling in the mod body during normal use. Keeping the cotton wicking ports well covered and not overfilling the tank keeps performance consistent and prevents condensation from building up around the airflow pins.

Compatibility with Boro Mods and AIO Systems

The Centaurus Boro Tank is designed specifically for the Lost Vape Centaurus B60 and B80 AIO mods, where it is used in RBA mode. It is also compatible with most standard boro mods and AIO systems that use the boro format, including a wide range of third-party devices. A chimney adapter is included in the box, which extends compatibility further to standard boro housings. Fit can vary between third-party boro mods, so if you are buying this for a non-Centaurus device it is worth checking your mod's boro slot dimensions before purchasing.

Stainless Steel and PCTG Construction

The outer body of the tank is stainless steel, with a PCTG section forming the e-liquid reservoir. PCTG is a durable plastic that resists cracking and is compatible with most e-liquids. The stainless steel chassis gives the tank a solid, well-made feel and handles the heat of regular use without any noticeable degradation. The overall dimensions of 39 x 25 x 16mm keep the tank compact enough to fit neatly within the boro housing of most compatible mods without adding bulk to the device profile.

UK TPD and 2ml Capacity

The UK version of the Centaurus Boro Tank holds 2ml of e-liquid in line with TPD regulations. The global version of the same tank has a 5ml capacity, but that version is not available for sale in the UK. The 2ml capacity is practical for most single-coil builds at moderate wattages, typically providing an hour or more of use between fills depending on how frequently you vape and at what power level. The side-fill port is accessible in most mod setups without needing to remove the tank.

Lost Vape Centaurus Boro Tank Colours

• Black
• Silver
• Gold

What's in the Box

• 1 x Lost Vape Centaurus Boro Tank
• 1 x Chimney adapter
• 3 x Airflow pins (1mm, 2mm, 3mm)
• 1 x Spare O-rings set
• 1 x User manual

Coil wire and wicking cotton are not included. Building tools and pre-built coils are sold separately.