Aspire Odan Replacement Coils – 3 Pack

Aspire Odan Coils

If you have an Aspire Odan, Odan Mini or Odan EVO tank, these are the coils you need. The Aspire Odan replacement coils come in a pack of three and are available in three mesh variants: 0.18Ω, 0.2Ω and 0.3Ω. All three are sub-ohm mesh coils built for direct-to-lung (DTL) vaping, so you will need a capable mod that can reach at least 35W to use them properly. The mesh build gives you a larger heating surface than a standard coil, which means faster warm-up, more consistent output and noticeably better flavour.

The wicking material is an 80/20 blend of linen cotton and organic cotton, which handles heat well and absorbs e-liquid quickly. These are plug-and-play coils, so changing them is straightforward: unscrew the base of the tank, pull out the old coil and press the new one in. Worth noting that these are also sometimes listed as Odan Mini coils, as the same coils fit both the full-size Odan and the Mini.

Aspire Odan Coils Key Features

• Pack of three replacement coils
• Three variants: 0.18Ω, 0.2Ω and 0.3Ω mesh
• All variants use a mesh coil build for better flavour and longer coil life
• 80/20 linen cotton and organic cotton wicking for fast saturation and heat resistance
• Plug-and-play press-fit installation, no tools needed
• Compatible with Aspire Odan, Odan Mini and Odan EVO tanks
• Best paired with high-VG e-liquids (60% VG or above)
• Sub-ohm coils

Coil Variants

There are three resistance options. Here is what each one is best suited to.

• 0.18Ω mesh coil, recommended wattage 60 to 80W. This is the highest-output option and the one to go for if you want big, dense clouds with intense flavour. It runs warm and rewards a high-VG shortfill, ideally 70% VG or above. Use it at the lower end of the range first to let the coil bed in, and step up the wattage from there. This is a serious sub-ohm coil that suits experienced cloud-chasers and flavour-focused DTL vapers.
• 0.2Ω mesh coil, recommended wattage 50 to 60W. The most popular choice for everyday Odan use. You still get excellent flavour and a satisfying DTL draw, but at a slightly lower wattage it is a bit more manageable for all-day vaping and is a little kinder on your e-liquid. A 60 to 70% VG e-liquid works well here. If you are not sure where to start with the Odan range, this is a solid middle ground. This is also the variant most people mean when they search for Aspire Odan 0.3 coils and land on the wrong page, so worth double-checking your resistance before ordering.
• 0.3Ω mesh coil, recommended wattage 35 to 45W. The most accessible option in the range, and the one we would point newer sub-ohm vapers towards first. It runs at a lower wattage, which means the draw is a bit cooler and the e-liquid goes further. Flavour is still excellent thanks to the mesh build. If you have been searching specifically for "aspire odan 0.3 coils", this is exactly what you are after. A 60% VG e-liquid is the right starting point.

Device Compatibility

These coils fit all three of the following Aspire tanks. The same coil works across the full Odan range, so you only need to pick your preferred resistance rather than worrying about which version of the tank you have.

• Aspire Odan Tank
• Aspire Odan Mini Tank
• Aspire Odan EVO Tank

These coils are not compatible with any other Aspire tank range. They will not fit the Nautilus series, the Cleito series, the PockeX or any other Aspire product outside the Odan family. If you are unsure which coil your tank takes, check your tank page or drop us a message and we will point you in the right direction.

Mesh Coil Build and Wicking

All three Odan coil variants use a mesh heating element rather than a traditional wire coil. The practical difference is that mesh has a much larger surface area in contact with your e-liquid, so it heats evenly, ramps up quickly and tends to produce cleaner, fuller flavour from the first draw. Mesh coils are also less prone to the hot spots that cause a burnt taste, which generally means they last longer than standard coils at similar wattages. The wick is an 80/20 blend of linen cotton and organic cotton. The linen component handles high temperatures well and resists degradation at the wattages these coils operate at, while the organic cotton absorbs e-liquid quickly to keep the mesh saturated. Give the coil a good prime before your first use and you will get the best out of it from the start.

E-Liquid Guide

All three Odan coil variants are designed for high-VG e-liquids. As a rule, you want 60% VG or higher, and a 70/30 or 80/20 VG/PG blend is ideal for the 0.18Ω and 0.2Ω coils at higher wattages. High-VG shortfill e-liquids are a natural match here: they produce thick, smooth vapour and work well with the mesh build. Because the vapour output is substantial, we would suggest keeping your nicotine strength at 6mg or below, and 3mg is comfortable for most vapers at these wattage levels. Nicotine salts are not well suited to sub-ohm coils at these wattages due to the harshness at higher outputs, so stick to freebase e-liquids for the best experience.

What's in the Box

• 3 x Aspire Odan replacement coils (select your variant at checkout)