Asmodus Minikin Replacement Pod

Asmodus Minikin Pod

The Asmodus Minikin replacement pod is the refillable pod cartridge for the Minikin Pod System kit. It holds 2ml of e-liquid in line with UK TPD regulations, is made from PCTG, and connects to the device via a magnetic click. The pod does not come with a coil installed - you push in whichever Minikin Pod coil suits your vaping style, whether that is the 0.8ohm for MTL, the 0.3ohm for sub-ohm, or any other resistance in the Minikin coil range.

The hidden side fill port opens with an upward push and closes back down to seal the liquid in, and the airflow is adjusted on the pod itself via a sliding switch that goes from fully closed through to wide open. Each pod includes both an MTL and an RDL drip tip.

Asmodus Minikin Replacement Pod Key Features

• 2ml capacity - UK TPD-compliant
• PCTG construction
• Hidden slide fill port - push up to open, close to seal
• Plug-to-install coil fitting - no threading, push to fit
• Adjustable airflow switch on the pod
• Magnetic connection to Minikin device
• MTL drip tip included
• RDL drip tip included
• Sold as a single pod
• Coils not included

Fill System

The fill port is set into the side of the pod behind a sliding cover. Push the cover upward and the port is exposed; fill your liquid in, then push the cover back down to close and seal it. There is no separate plug or cap to lose. The port itself has a leak-proof membrane so you can fill confidently without it weeping back out. When fitting a new coil, fill the pod and leave it for around five minutes before vaping to let the e-liquid fully saturate the coil - skipping this step is the most common cause of a burnt taste on the first draw.

Coil Compatibility and Fitting

Minikin Pod coils are plug-to-install, meaning you push them into the base of the pod until they sit snugly - no screwing, no threading. The range covers MTL through to DTL: the 0.8ohm coil is designed for a tighter mouth-to-lung draw and works best with higher-PG e-liquids or nic salts, while the 0.3ohm coil is for sub-ohm vaping and handles a thicker, higher-VG liquid better. The coils are sold separately as the Asmodus Minikin Pod Replacement Coils. If you are unsure which resistance to go for, the kit you are using will suggest a wattage range for each coil.

Airflow

The airflow adjustment is a sliding switch on the body of the pod, not on the device itself. This means you can tune the draw without changing any settings on the mod. At the closed end it shuts off airflow entirely, which is useful for priming a new coil before you start vaping. Open it progressively for a looser draw. The range is wide enough to cover both a tight MTL pull and a more open RDL draw depending on the coil fitted.

Drip Tips

The pod ships with two drip tips: a narrow-bore MTL tip and a wider-bore RDL tip. Both are removable and interchangeable, so you can switch between them depending on which coil and airflow setting you are using. A narrower tip gives a more concentrated, mouth-to-lung draw; the wider tip opens up the vapour path to suit the looser airflow needed for RDL vaping.

What's in the Box

• 1 x Asmodus Minikin replacement pod (empty, coils not included)
• 1 x MTL drip tip
• 1 x RDL drip tip