VOOPOO Vinci E Replacement Pods

VOOPOO Vinci E Replacement Pod

These are the official VOOPOO replacement pod cartridges for the Vinci E120 and Vinci E80 pod kits. They are empty pods with no built-in coil: you fit a separate PnP X coil of your choice, vape until the coil is spent, then swap the coil and keep the pod. Sold in a pack of 2, they are available in two variants, MTL and DTL, with the airflow channels in each pod tailored to the corresponding draw style.

Each pod holds 2ml in the UK TPD version, fills from the top side, and connects to the device magnetically. Built from PCTG, a durable, impact-resistant plastic, the pods are designed to outlast multiple coil changes.

VOOPOO Vinci E Replacement Pod Key Features

• 2ml capacity (TPD)
• Available in MTL and DTL variants
• Top-side fill with silicone stopper
• Press-fit PnP X coil installation
• Magnetic device connection
• PCTG construction
• Double-sealed leak-resistant design
• Compatible with VOOPOO Vinci E120 and E80

2ml Capacity

The UK TPD version of the Vinci E120 pod holds 2ml of e-liquid. The 5ml non-TPD version is not available in the UK. At 2ml the pod suits regular top-ups through the day, which takes only a few seconds with the side-fill port. For DTL coils, high-VG shortfills at 70/30 or above are recommended. For MTL coils, 50/50 e-liquids and nicotine salts up to 20mg are suitable.

MTL and DTL Variants

The Vinci E120 replacement pod is available in two distinct variants and the correct one must be chosen to match your coils. The MTL pod has narrower internal airflow channels and is designed for use with PnP X coils at 0.6Ω, 0.8Ω and 1.0Ω. The DTL pod has wider channels and is designed for 0.15Ω, 0.2Ω and 0.3Ω coils. The two variants are not interchangeable and cannot be converted. If you mainly use nicotine salts or prefer a tighter draw similar to a cigarette, choose the MTL pod. If you prefer open draws and larger vapour production, choose the DTL pod.

Top-Side Fill

To refill the pod, lift the silicone tab on the side to expose the fill port. Insert your bottle nozzle, fill to the 2ml line, and press the tab back down to reseal. The silicone stopper creates a tight seal each time, reducing the chance of leaks during normal use. The pod does not need to be removed from the device to refill.

Press-Fit PnP X Coil Installation

PnP X coils push directly into the base of the pod without threading. To change the coil, pull the spent coil straight out and push the replacement in until it clicks. Prime the new coil with a few drops of e-liquid before refilling the pod and allow five minutes to soak before vaping. These pods accept the full PnP X coil range within the resistance limits of their variant. Replacement PnP X coils are available separately on the VOOPOO PnP X coils page.

Magnetic Device Connection

The pod attaches to the Vinci E120 and E80 devices via a magnetic connection. The magnet is strong enough to hold the pod securely during normal handling and the pod can be removed and reattached one-handed. There is no locking tab or twist mechanism required.

PCTG Construction

PCTG is a thermoplastic material used in food-contact and medical applications. It is more resistant to cracking, impact and e-liquid discolouration than standard polycarbonate pods. This means the pod body is less likely to become brittle over time with regular coil changes and refills.

Double-Sealed Leak-Resistant Design

The Vinci E120 pod uses two independent seals: one at the fill port and one at the coil seat. Both need to be properly seated for the leak-resistant system to work. Always ensure the coil is fully clicked in before refilling, and the silicone fill tab is pressed down flat before inserting the pod into the device.

Compatible Devices

These pods are designed for and exclusively compatible with the VOOPOO Vinci E120 and VOOPOO Vinci E80 pod kits. They are not compatible with any other VOOPOO device, including the Vinci X, Vinci S, Vinci Air or Drag series kits. If you are unsure which pod your device uses, check the model name printed on the device or the original packaging.

What's in the Box

• 2 x VOOPOO Vinci E Replacement Pod

Coils are not included. PnP X coils must be purchased separately and fitted before use.