Vaporesso GTX Dual Mesh Coils

Vaporesso GTX Dual Mesh Replacement Coils (5 Pack)

The Vaporesso GTX dual mesh coils use two mesh heating elements instead of one, giving a larger contact area with your e-liquid for richer flavour and denser vapour than the standard single mesh GTX coils. Three DTL resistances are available: 0.15Ω (60 to 75W), 0.2Ω (45 to 60W), and 0.3Ω (32 to 45W). Like all GTX coils, they use plug-and-play installation, flax cotton and non-woven fabric wicking, and triple silicone O-rings for leak resistance.

The dual mesh versions fit the same 20+ Vaporesso kits and pods as the standard GTX range, including the Armour G, Armour GS, Luxe XR Max, Swag PX80, and GTX One. Sold in packs of five. High VG e-liquids of 70% VG or above are recommended.

GTX Dual Mesh Key Features

• Two mesh heating elements per coil for stronger flavour
• Three DTL resistances: 0.15Ω, 0.2Ω, and 0.3Ω
• Plug-and-play coil installation
• Flax cotton and non-woven fabric wicking
• Triple silicone O-ring seal for leak resistance
• Fits the same devices as standard GTX coils
• Sold in 5-packs

What Makes Dual Mesh Different from Single Mesh

A standard GTX mesh coil has one mesh strip that heats the e-liquid. The dual mesh version doubles this with two separate mesh elements working together inside the same coil housing. This creates a noticeably larger heating surface area, which means more e-liquid is vaporised with each draw. The practical result is a fuller, more intense flavour and thicker vapour production at the same wattage as the equivalent single mesh coil. If you have tried the standard GTX 0.2Ω mesh at 55W and want more from it without increasing the power, switching to the dual mesh 0.2Ω at the same wattage will give you a clear step up in taste and cloud density.

GTX Dual Mesh Wattage and Resistance Guide

GTX 0.15Ω Dual Mesh Coil (60 to 75W, best at 70W) – The most powerful option in the dual mesh range. Built for maximum cloud production and intense flavour with a wide-open DTL draw. Best paired with high VG shortfills at 3mg or 6mg. This is the coil to choose if you want the biggest, most flavourful hit the GTX platform can deliver.

GTX 0.2Ω Dual Mesh Coil (45 to 60W, best at 55W) – The most versatile dual mesh option. Delivers noticeably richer flavour and denser vapour than the single mesh 0.2Ω at the same wattage. Works particularly well with sweet, dessert, and fruity e-liquids where you want to extract as much flavour as possible. A strong all-round DTL coil.

GTX 0.3Ω Dual Mesh Coil (32 to 45W, best at 40W) – The lowest wattage dual mesh coil, offering the boosted flavour of two mesh elements at a more moderate power draw. A good choice if you want the dual mesh flavour advantage but prefer to save battery life or run at cooler temperatures. Still firmly a DTL coil with satisfying vapour production.

Flax Cotton and Non-Woven Fabric Wicking

GTX dual mesh coils use the same flax cotton and non-woven fabric wicking found in the standard GTX range. The flax fibres absorb e-liquid faster and hold more of it against both mesh elements, which is important because dual mesh coils consume e-liquid slightly quicker than single mesh at the same resistance. The rapid wicking helps prevent dry hits even at the higher end of the recommended wattage range. Vaporesso also uses antibacterial cotton in the wicking structure to keep the flavour clean throughout the life of the coil.

Triple Silicone O-Ring Seal

Each dual mesh coil has three silicone O-rings around the base and top to create a tight seal when installed. This reduces the chance of e-liquid leaking between the coil and the pod or tank. The triple seal is the same design used across the entire GTX coil range and helps keep the connection point clean.

Plug-and-Play Installation

GTX dual mesh coils install exactly the same way as standard GTX coils. Push the old coil out from the base of the pod or tank and press the new one in until it sits flush. No screwing or alignment is needed. Before your first vape on a new dual mesh coil, fill the pod or tank and leave it for 5 to 10 minutes so the wicking material can saturate fully. Because dual mesh coils have more wicking surface, giving them a proper soak before use is especially important to avoid dry hits on the first few draws.

Compatible Devices

GTX dual mesh coils fit the same devices as the standard GTX mesh coils. The most popular compatible devices include:

• Vaporesso Armour G, Armour GS, and Armour Ultra
• Vaporesso Luxe X, Luxe X2, Luxe X Pro, Luxe XR Max, and Luxe XR Max 2
• Vaporesso Luxe 80 and Luxe 80S
• Vaporesso Swag PX80
• Vaporesso GTX One, GTX GO 40, and GTX GO 80
• Vaporesso Gen PT60, Gen PT80 S, and Gen Nano
• Vaporesso Target 80, Target PM80, and Target PM80 SE

Because dual mesh coils are only available in sub-ohm DTL resistances (0.15Ω, 0.2Ω, and 0.3Ω), make sure your device can output enough wattage to run them properly. Kits with a maximum output below 30W will not be suitable for the 0.15Ω or 0.2Ω dual mesh coils. GTX dual mesh coils are part of the GTX platform and are not compatible with GTi coil tanks such as the iTank or iTank 2.

E-Liquid Recommendations

All three dual mesh coils are designed for use with high VG e-liquids. A 70/30 VG/PG ratio or higher is recommended for the best wicking and vapour production. Shortfill e-liquids work well across all three resistances. Because dual mesh coils produce large amounts of vapour at sub-ohm wattages, freebase nicotine at 3mg or 6mg is the most comfortable option. Dual mesh coils do consume slightly more e-liquid per puff than single mesh at the same resistance, so keep this in mind if you are filling a smaller pod.

What's in the Box

• 5 x Vaporesso GTX Dual Mesh Coils (resistance as selected)

High VG e-liquids of 70% VG or above are recommended. GTX dual mesh coils are not compatible with GTi coil tanks such as the iTank or iTank 2.