SKE Crystal CL6000 Prefilled Pod Kit

SKE Crystal CL6000 Pod Kit

The SKE Crystal CL6000 is a rechargeable prefilled pod kit that delivers around 6,000 puffs per pod set. It is not a disposable: you recharge the battery via USB-C and swap the pod set when the e-liquid runs out. The CL6000 is also known as the Crystal 6000, Crystal CL 6000, or SKE Crystal Bar CL6000 - these all refer to the same device.

The CL6000 uses a two-piece pod design: a 2ml prefilled pod and a separate 10ml refill container that automatically tops up the pod as you vape. Together that gives you 12ml of e-liquid per set. The pod contains a dual mesh coil and the whole unit connects to the device with a simple click. The draw is mouth-to-lung, inhale activated, with no fire button.

Each pod set is filled with 20mg nicotine salt e-liquid in your choice of flavour. If you are coming from Crystal Bar disposables, the CL6000 is the rechargeable version: same flavours, same MTL draw, same feel - but you recharge and replace instead of throwing the whole device away.

SKE Crystal CL6000 Key Features

• Around 6,000 puffs per pod set
• 800mAh built-in rechargeable battery
• USB-C charging, 60 to 90 minutes from flat
• Two-piece pod: 2ml pod plus 10ml refill container
• Dual mesh coil built into every pod
• 20mg nicotine salt e-liquid
• Inhale activated, fixed MTL draw
• LED battery display
• Transparent pod window
• Wide flavour range

6,000 Puffs Per Pod Set

The 6,000-puff rating comes from the combined capacity of the 2ml pod and the 10ml refill container, giving 12ml of e-liquid per set. The refill container feeds liquid into the pod automatically as you vape, so you do not need to manually top anything up. Actual puff count depends on the length of your draws - shorter MTL draws will get you closer to the rated figure.

800mAh Battery and USB-C Charging

The built-in 800mAh battery is larger than the 400mAh cell in the Crystal Plus, and should comfortably last most vapers a full day on MTL use. Charging is via USB-C and takes between 60 and 90 minutes from flat. The LED display shows battery percentage so you can see when it needs topping up. There is no removable battery on this device.

Two-Piece Pod System

The CL6000's pod assembly splits into two components: a 2ml pod containing the coil and mouthpiece, and a 10ml refill container that sits below it. Both pieces come pre-attached in every replacement pack, so you just pull the old set out and click the new one in. This two-piece design is how SKE get approximately 6,000 puffs out of a single pod set while staying within UK TPD limits on pod capacity.

Dual Mesh Coil

Every CL6000 pod comes with a dual mesh coil already fitted. Mesh coils heat e-liquid across a wider surface than traditional round wire, which means more consistent flavour from the first puff through to the last. There is no coil priming required: because the pod arrives prefilled, it is ready to use as soon as you click it in. When the pod set is empty, you replace the whole unit - coil included.

20mg Nicotine Salt

All CL6000 pods are filled with 20mg/ml nicotine salt e-liquid, the same strength used in Crystal Bar disposables. Nicotine salt delivers a smooth throat hit at higher strengths compared to freebase nicotine, which makes it well suited to the CL6000's tight MTL draw. Each pod set uses SKE's Crystal Original nic salt formulation in your chosen flavour.

Inhale Activated MTL Draw

The CL6000 is inhale activated with no fire button. The airflow is fixed and tuned for a tight mouth-to-lung draw, which closely mirrors the experience of smoking or using a Crystal Bar disposable. There is no adjustable airflow on this device. If you want a looser, more open draw, this is not the kit for that - but for MTL vapers it is exactly what it needs to be.

LED Battery Display

The LED display on the side of the device shows your remaining battery level in real time. This removes the guesswork that comes with devices that only give a low-battery warning light. You can tell at a glance whether you need to charge before heading out.

Transparent Pod Window

The refill container is clear, so you can see how much e-liquid remains in the 10ml section. Combined with the LED battery display, this gives you a clear read on both battery and liquid levels without having to remove the pod set.

SKE Crystal CL6000 Flavours

• Berry Medley
• Blue Fusion
• Blue Razz Lemonade
• Blueberry Cherry Cranberry
• Blueberry Raspberries
• Blueberry Sour Raspberry
• Cherry Ice
• Cola Ice
• Double Apple
• Dragon Fruit Peach Melon
• Fizzy Cherry
• Fresh Menthol Mojito
• Fruit Gum
• Fruit Medley
• Grape Splash
• Kiwi Passion Fruit Guava
• Lemon & Lime
• Peach Mango Watermelon
• Pink Lemonade
• Sour Pineapple
• Strawberry Burst
• Strawberry Raspberry Cherry
• Triple Mango
• Watermelon Ice

All flavours are available at 20mg nicotine strength only. 

What's in the Box

• 1 x SKE Crystal CL6000 device
• 1 x CL6000 pod set (2ml pod plus 10ml refill container, prefilled in chosen flavour)
• 1 x USB-C charging cable

Replacement pod sets are available separately as SKE Crystal CL6000 Refill Pods.