OXVA Xlim Go Pod Vape Kit

OXVA Xlim Go Vape Kit

The OXVA Xlim Go is a draw-activated pod vape kit built for simplicity. There are no buttons, no screens, and no settings to adjust. You fill the pod, inhale, and it fires automatically.

A 1000mAh built-in battery provides up to two days of use on a single charge, and the 30W maximum output adjusts itself to suit whichever pod you install. The Xlim Go is compatible with the entire OXVA Xlim pod range, including Top Fill (V3), V2, EZ, and Prefilled cartridges, with resistances from 0.4Ω to 1.2Ω for both MTL and RDTL vaping. A grooved airflow slider on the side lets you tighten or loosen the draw to your preference.

 The device weighs just 41g and features an artificial leather grip panel for a comfortable, anti-slip hold. It ships with one 0.8Ω Xlim Top Fill pod (2ml, UK TPD compliant) and comes in sixteen colours across four design ranges. Please note that a USB-C charging cable is not included.

OXVA Xlim Go Pod Kit Key Features

• 1000mAh built-in battery for up to two days of vaping
• 30W maximum output with auto-adjusting wattage
• Draw-activated with no buttons or screens
• Grooved adjustable airflow slider for MTL and RDTL
• Compatible with all OXVA Xlim pods (0.4-1.2Ω)
• Artificial leather grip with skin-pasting design
• Tri-colour LED battery indicator
• Lightweight at just 41g
• 2ml top-fill leak-resistant pods (UK TPD)
• Works with nic salt and freebase e-liquids
• 16 colours, including Graffiti, Striped and Luxe finishes

1000mAh Built-in Battery

The Xlim Go carries a 1000mAh battery that is enough to get most vapers through a full day, with lighter users stretching to two days on a single charge. A tri-colour LED indicator built into the "X" logo on the front of the device shows your remaining battery level at a glance.

Green means 60-100% remaining, blue means 20-60%, and red means you are below 20% and should charge soon. The device charges via USB Type-C at 5V/1A. A charging cable is not included in the box, but any standard USB-C cable will work.

30W Maximum Output with Auto-Adjusting Wattage

The Xlim Go outputs between 5W and 30W. It automatically detects the resistance of the pod you install and sets the wattage to match. With a 0.8Ω pod, it runs at around 12-16W for a warm MTL draw. With a 0.6Ω pod, it pushes to 20-25W for a slightly airier RDTL pull.

With a 0.4Ω pod, it delivers the full 30W for a looser vape with more vapour. There are no manual wattage controls, which keeps the device straightforward for beginners and anyone who prefers a fill-and-go approach.

Draw-Activated with No Buttons or Screens

The Xlim Go is entirely draw-activated. You inhale on the mouthpiece, and the device fires. There is no fire button, no power button, and no screen. You cannot accidentally fire the device in your pocket, and there is nothing to learn or configure.

This makes it a natural choice for people switching from disposable vapes or cigarettes, as the experience is very similar. Just fill the pod, let it prime, and start vaping.

Grooved Adjustable Airflow Slider

A sliding airflow control sits on the side of the Xlim Go. Move it towards the closed position for a tighter, cigarette-style mouth-to-lung draw. Open it up for a looser restricted direct-to-lung pull with more vapour production.

The slider features a grooved design that prevents it from moving accidentally in your pocket or bag, so your airflow setting stays where you put it. The draw activation works consistently across the full range of airflow positions.

Compatible with All OXVA Xlim Pods

The Xlim Go works with every pod in the OXVA Xlim range. That includes Xlim Top Fill (V3) cartridges with their convenient top-fill port, Xlim V2 cartridges with side-fill, Xlim EZ cartridges with the snap-cap filling system, and the OXVA Xlim Prefilled pods that come ready to vape with nic salt e-liquid.

Available resistances are 0.4Ω (26-30W, RDTL), 0.6Ω (20-25W, RDTL/MTL), 0.8Ω (12-16W, MTL) and 1.2Ω (10-12W, tight MTL). The kit ships with a single 0.8Ω Xlim Top Fill pod pre-installed, which is a solid starting point for mouth-to-lung vaping with nic salt or 50/50 e-liquids.

Artificial Leather Grip with Skin-Pasting Design

OXVA uses a skin-pasting technique on the Xlim Go that wraps the device in an artificial leather panel. This gives the kit a premium feel in the hand, with a comfortable texture that provides grip without being sticky. The diamond-pattern design on the leather panel adds a decorative touch and makes the device pleasant to hold.

Despite the premium feel, the Xlim Go is built from lightweight PCTG plastic, keeping the total weight down to just 41g. The dimensions are 113.7mm tall, 26mm wide, and 14.6mm deep, making it one of the most compact and portable pod kits available.

Tri-Colour LED Battery Indicator

The "X" emblem on the front of the Xlim Go doubles as a battery indicator. It lights up each time you take a puff, changing colour to show your remaining charge. Green indicates 60-100% battery, blue indicates 20-60%, and red means you have less than 20% left and should connect the charger. The light only appears when the device is in use or charging, so it stays hidden the rest of the time.

2ml Top-Fill Leak-Resistant Pods

The included Xlim Top Fill pod holds 2ml of e-liquid in line with UK TPD regulations. To refill, flip up the rubber stopper on the top of the mouthpiece to reveal the fill port. You do not need to remove the pod from the device. The pod has a frosted transparent body so you can check your liquid level without removing it.

A leak-resistant design keeps the base sealed and protects the battery contacts from liquid. For new pods, fill with e-liquid and wait five to ten minutes before your first puff to allow the cotton to fully saturate.

OXVA Xlim Go Colours

The Xlim Go is available in sixteen colours across four design ranges.

• Black
• Dark Brown
• Dark Grey
• Light Brown
• Light Green
• Pink
• Red
• White
• Graffiti Black
• Graffiti Blue
• Graffiti Pink
• Striped Blue
• Striped Grey
• Striped Orange
• Luxe Black
• Luxe Brown

The Luxe Black and Luxe Brown finishes use a higher-grade leather with embossed OXVA branding and high-gloss metal edges for a more refined look. The Graffiti range features bold, street-inspired patterns, while the Striped range offers a cleaner, more understated design.

What's in the Box

• 1x OXVA Xlim Go device
• 1x Xlim Top Fill Cartridge 0.8Ω (2ml, pre-installed)
• 1x User manual

Please note that a USB Type-C charging cable is not included. Any standard USB-C cable will work for charging. The kit comes with one pod to get you started. Just add your preferred nic salt or 50/50 e-liquid, wait a few minutes for the cotton to prime, and you are ready to vape. Additional Xlim pods in other resistances and filling styles can be purchased separately.