OXVA VPrime Replacement Vape Pods

OXVA VPrime Pods

OXVA Vprime replacement vape pods are refillable cartridges designed for the OXVA Vprime pod vape kit. Each pod holds 2ml of e-liquid (UK TPD compliant) and has a built-in Unitech 2.0 mesh coil, so there are no separate coils to change. When the flavour fades, you replace the entire pod. Four resistance options are available, covering direct-to-lung, restricted direct-to-lung and mouth-to-lung vaping styles.

The pods use a side-fill design with a silicone plug, allowing you to top up without removing the pod from the device. A 5-layer leak-proof structure keeps things clean, and the tinted transparent body lets you check your e-liquid level at a glance. Sold in packs of 2.

OXVA VPrime Pod Key Features

• Built-in Unitech 2.0 mesh coils for improved flavour and longevity
• Four resistance options: 0.2Ω, 0.4Ω, 0.6Ω and 0.8Ω
• 2ml e-liquid capacity (UK TPD compliant)
• Side-fill silicone plug for easy refilling
• 5-layer leak-proof structure
• Magnetic connection to Vprime device
• Transparent tinted body for liquid level monitoring
• Wide bore integrated mouthpiece
• Compatible with OXVA Vprime pod vape kit only
• Sold in packs of 2

Built-in Unitech 2.0 Mesh Coils for Improved Flavour and Longevity

Each Vprime pod has a mesh coil permanently built into it using OXVA's Unitech 2.0 technology. This design wraps five layers of cotton around the inner mesh element, improving how efficiently the coil absorbs e-liquid and distributes heat. The result is a smoother, more flavourful vape with noticeably better coil life compared to standard mesh pods. Because the coil is integrated, there is nothing to install or replace separately. When the flavour drops off or you notice a burnt taste, simply swap the whole pod for a fresh one.

Four Resistance Options: 0.2Ω, 0.4Ω, 0.6Ω and 0.8Ω

The Vprime pod range covers a wide spread of vaping styles. The 0.2Ω pod (red colour code) is built for direct-to-lung vaping at 45-60W, producing large clouds and intense flavour with high VG e-liquids. The 0.4Ω pod (gold colour code) sits in the restricted direct-to-lung range at 28-38W, offering a balance of cloud and flavour. The 0.6Ω pod (black colour code) runs at 20-25W for a tighter restricted draw, and the 0.8Ω pod is designed for mouth-to-lung vaping at lower wattages, working well with nic salt and 50/50 e-liquids.

2ml E-Liquid Capacity

In line with UK TPD regulations, each Vprime pod holds 2ml of e-liquid. At higher wattages with the 0.2Ω pod, you will find yourself refilling more frequently. At lower power settings with the 0.6Ω or 0.8Ω pods, a full pod will last considerably longer between top-ups. The side-fill port makes refilling quick, so even frequent top-ups are not much of a hassle. An XL version of the Vprime pod with a larger capacity is also available for use outside the UK.

Side-Fill Silicone Plug for Easy Refilling

The fill port is located on the side of each pod and sealed with a silicone plug. You can lift the plug, insert your e-liquid bottle nozzle, and fill without needing to remove the pod from the device. The opening is a decent size, making it easy to fill cleanly without spillage. Once filled, the silicone plug presses back firmly to create a tight seal. For new pods, let the e-liquid soak into the coil for five to ten minutes before your first puff to avoid dry hits.

5-Layer Leak-Proof Structure

OXVA has built a 5-layer leak-proof system into each Vprime pod, including triple silicone seals around the base and fill port. The base of the pod is fully sealed, which keeps condensation and liquid away from the device's electrical contacts. As long as the pod is properly seated and you are not overfilling past the maximum line, leaking should not be an issue during normal use.

Magnetic Connection to Vprime Device

The pods click into the top of the Vprime device using a magnetic connection. This holds the pod securely in place with no wobble or play, and ensures consistent electrical contact for reliable performance. Removing the pod is just as straightforward. Pull it upwards and the magnets release cleanly.

Transparent Tinted Body for Liquid Level Monitoring

The pod body is made from tinted PCTG plastic, giving it a slightly shaded appearance while still allowing you to see your e-liquid level clearly. This makes it easy to tell when you are running low and need to refill, helping you avoid dry hits before they happen.

Wide Bore Integrated Mouthpiece

The mouthpiece is built into each pod and features a wide bore opening. This design suits the Vprime's direct-to-lung and restricted direct-to-lung strengths, allowing plenty of airflow through to match the device's higher power output. The mouthpiece shape is slim and rounded, making it comfortable for extended vaping sessions.

Compatible with OXVA VPrime Pod Vape Kit Only

Vprime pods are designed exclusively for the OXVA Vprime pod vape kit. They are not compatible with other OXVA devices such as the XLIM, NeXlim or Oneo ranges. The Vprime device automatically detects which pod resistance is installed and adjusts its wattage through Smart VW Mode, so you can swap between pod options without needing to change any settings manually.

OXVA VPrime Pod Variants

• 0.2Ω Mesh Coil (Red) - DTL - 45-60W - Best with high VG (70/30) e-liquids
• 0.4Ω Mesh Coil (Gold) - RDTL - 28-38W - Best with high VG (70/30) e-liquids
• 0.6Ω Mesh Coil (Black) - RDTL - 20-25W - Best with 70/30 or 50/50 e-liquids
• 0.8Ω Mesh Coil - MTL - Best with nic salt or 50/50 e-liquids

What's in the Box

• 2x OXVA Vprime replacement vape pods (chosen resistance)

Each pack contains two pods in your selected resistance. Remember to let a new pod sit for five to ten minutes after filling before you take your first puff.