GeekVape Wenax Q Pro Pod Kit

GeekVape Wenax Q Pro Vape Kit

The GeekVape Wenax Q Pro is a pen-style pod kit with a 1200mAh built-in battery, 30W maximum output, and a 0.96-inch colour OLED screen with an aurora-themed animated interface. It uses haptic touch controls rather than physical buttons, giving the device a clean, button-free face. The base has a rubberised silicone anti-drop coating to protect against knocks and falls.

Three vaping modes are available: Smart Mode sets the wattage automatically based on the fitted pod, Power Mode lets you adjust it manually, and Eco Mode turns off the screen animations and vibration to extend battery life. Airflow is adjusted via a three-level slider on the side of the device. The Wenax Q Pro takes the full range of GeekVape Q pod cartridges, with all four resistance options supported. It includes two pods and is available in eight colours.

Wenax Q Pro Key Features

• 1200mAh built-in battery, full charge in approximately 30 minutes
• 30W maximum output, 5-30W variable range
• Three modes: Smart, Power, and Eco
• 0.96-inch colour OLED screen with aurora-themed UI
• Haptic touch controls with vibration feedback
• Draw-activated and haptic button activation
• 3-level adjustable airflow slider
• Rubberised anti-drop silicone base
• Compatible with all GeekVape Q pod cartridges (0.4 to 1.2Ω)
• 2ml pod capacity (UK TPD), magnetic connection
• Breathing indicator light in green, blue, or red
• Type-C 5V/2A fast charging
• Dimensions: 119.46mm x 26.00mm x 17.99mm, 64.66g
• Available in 8 colours

1200mAh Battery with Fast Charging

The Wenax Q Pro has a built-in 1200mAh battery that covers a full day of use for most vapers. Type-C fast charging at 5V/2A brings the device to a full charge in approximately 30 minutes. The screen shows battery percentage at all times, and the breathing indicator light on the device changes colour to show charge state at a glance. Eco Mode can be used when the battery is running low to disable animations and vibration, reducing power consumption and extending the remaining charge.

30W Output with Smart, Power, and Eco Modes

The Wenax Q Pro covers a 5-30W output range across three modes. Smart Mode detects the resistance of the fitted pod automatically and sets an appropriate wattage, which is the easiest option for everyday use. Power Mode lets you set the wattage manually within the safe range for the fitted coil using the haptic touch buttons on the screen. Eco Mode reduces battery drain by switching off the screen animation and haptic vibration during use. The mode menu is accessed by pressing the fire button four times. Smart Mode is the default on first use.

0.96-Inch Colour OLED Screen with Aurora UI

The Wenax Q Pro has a 0.96-inch full-colour OLED screen that shows wattage, battery percentage, coil resistance, puff count, current mode, and device lock state. The screen uses an aurora-themed animated interface with flowing light effects in the background. The display is clear and readable in daylight. Unlike many pod kits that use static readouts, the animated UI is one of the more distinctive visual features of the Q Pro range. The animation can be turned off in Eco Mode if preferred.

Haptic Touch Controls

The Wenax Q Pro uses haptic touch buttons rather than physical buttons, giving the front face of the device a flush, smooth finish. The touch buttons respond with a short vibration when pressed, confirming the input without needing to look at the screen. Wattage is adjusted up or down using the touch controls in Power Mode. The fire button is also touch-activated and doubles as the menu navigation control. The haptic system is responsive and does not require firm pressing, which makes adjustments quick and easy during use.

3-Level Adjustable Airflow

The airflow slider on the side of the Wenax Q Pro has three positions covering tight MTL through to restricted DTL. The tightest position suits the 1.2Ω pod for a close, cigarette-style draw. The middle position suits the 0.8Ω pod for a standard MTL inhale. The most open position suits the 0.6Ω pod for a looser MTL or restricted DTL draw. The slider moves between positions with a firm click and stays in place during use. Matching the airflow position to the resistance of the fitted pod gives the best balance of flavour and draw resistance.

Rubberised Anti-Drop Base

The base of the Wenax Q Pro is coated in a thick silicone rubber layer that provides grip on flat surfaces and absorbs impact from drops. The device stands upright on its own thanks to this base, which is useful on a desk or table. The rubberised coating also protects the charging port area from surface contact when the device is laid flat. This is a practical detail that distinguishes the Q Pro from the standard Wenax Q and Wenax Q2, which do not have the same base treatment.

Compatible with GeekVape Q Pod Cartridges

The Wenax Q Pro takes the full range of GeekVape Q replacement pod cartridges, including all four resistance options. The pods connect magnetically and are sold separately in packs of three.

• 0.4Ω pod runs at 25-30W for a restricted DTL draw with more vapour and a warmer inhale. Best with 50/50 or higher-VG e-liquid.
• 0.6Ω pod runs at 18-25W for a loose-to-mid MTL draw. Comes included with the kit as the pre-installed pod. Best with 50/50 freebase or nic salts up to 20mg.
• 0.8Ω pod runs at 12-18W for a standard MTL draw. Comes included as the spare pod. Best with 50/50 freebase or nic salts at 20mg.
• 1.2Ω pod runs at 8-12W for a tight, cigarette-style MTL draw. Best with nic salts at 20mg and above.

2ml Pod Capacity and Integrated Mesh Coil

The Q pods hold 2ml of e-liquid in the UK TPD version. Each pod has an integrated mesh coil built into the pod body, so there are no separate coils to buy or install. When the coil wears out or flavour starts to fade, the whole pod is replaced. The pods use a side-fill design, with a hinged silicone tab on the side of the pod marked OPEN. The pod does not need to be removed from the device to refill. Allow the pod to sit for two to three minutes after filling before vaping to avoid dry hits on the first draw.

GeekVape Wenax Q Pro Colours

• Black
• Moonlit Silver
• Starlight Grey
• Azure Blue
• Twilight Red
• Aurora Green
• Sunburst Gold
• Luminous Purple

What's in the Box

• 1 x GeekVape Wenax Q Pro device
• 1 x 0.6Ω GeekVape Q pod (pre-installed)
• 1 x 0.8Ω GeekVape Q pod (spare)
• 1 x Type-C USB charging cable
• 1 x User manual and warning card