Aspire BP Replacement Coils

Aspire BP Coils

The Aspire BP replacement coils are the coil series used across the BP range of devices, including the Onixx, BP60, BP80, Finixx, Nautilus Prime X, and Tekno. They come in a pack of five and are available in three variants suited to the Onixx and BP60: the 1.0Ω for MTL, the 0.6Ω for RDTL, and the 0.3Ω mesh for a warmer RDTL draw. All three use press-fit installation. The 1.0Ω and 0.6Ω are round wire coils, and the 0.3Ω is a mesh coil. If you own an Onixx kit, the 1.0Ω and 0.6Ω coils are the same ones that come included in the box.

Aspire BP Coil Key Features

• Five coils per pack
• Three variants for the Onixx and BP60: 1.0Ω (10-16W), 0.6Ω (15-25W), and 0.3Ω mesh (30-40W)
• Press-fit installation, no threading required
• The 1.0Ω coil is designed for a tight MTL draw and works best with nic salts and 50/50 e-liquids
• The 0.6Ω coil is designed for a restricted direct-to-lung draw and works well with 50/50 e-liquids or low-strength nic salts
• The 0.3Ω mesh coil is designed for a warm RDTL to DTL draw and is suited to 70%+ VG shortfill e-liquids
• Compatible with the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, Tekno, and Rhea X (variant-dependent, see Compatible Devices below)

1.0Ω BP Coil, 10-16W, MTL

The 1.0Ω BP coil is rated for 10-16W and gives a tight, cigarette-like mouth-to-lung draw. It is one of the two coils included in the Onixx kit and is the recommended starting point for new vapers or anyone switching from smoking. At low wattages it draws very little power from the battery, which helps to extend the time between charges on the Onixx's 2000mAh battery. Use nic salts or 50/50 freebase e-liquids for the best results. The 1.0Ω coil is compatible with the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, and Tekno.

0.6Ω BP Coil, 15-25W, RDTL

The 0.6Ω BP coil is rated for 15-25W and produces a restricted direct-to-lung draw with more warmth and vapour than the 1.0Ω. It is the second coil included in the Onixx kit and is suited to vapers who want a draw that sits between a tight MTL and a full DTL. It works well with 50/50 e-liquids, though the more open the airflow the better it performs with slightly higher-VG blends. The 0.6Ω is compatible with the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, and Tekno.

0.3Ω BP Mesh Coil, 30-40W, RDTL/DTL

The 0.3Ω BP mesh coil is rated for 30-40W and is the most open, warmest draw of the three Onixx-compatible variants. It is not included in the Onixx kit and is sold separately. The mesh construction heats more evenly than the wire coils and gives better vapour production at higher wattages. Use 70%+ VG shortfill e-liquids for best results. The 0.3Ω is compatible with the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, and Rhea X.

Compatible Devices

BP coil compatibility varies by variant. The table below shows which coils fit which devices.

• The 1.0Ω and 0.6Ω fit the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, and Tekno.
• The 0.3Ω mesh fits the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, and Rhea X.
• The 0.17Ω and 0.15Ω mesh variants fit the BP80, Finixx, and Huracan Tank but are NOT compatible with the Onixx Tank.
• The 0.15Ω BP Pro mesh fits the BP80, Finixx, Rhea X, and Huracan Tank only.
• The 0.4Ω mesh is compatible with the BP80 and BP Stik but is NOT compatible with the Onixx Tank.
• If you own an Onixx, stick to the 1.0Ω, 0.6Ω, or 0.3Ω mesh variants. The higher-wattage mesh coils designed for the BP80 and Huracan Tank will not fit the Onixx tank correctly.

What's in the Box

• 5 x Aspire BP replacement coils (1.0Ω, 0.6Ω, or 0.3Ω mesh, depending on variant ordered)