VOOPOO ITO-X Pod

VOOPOO ITO-X Replacement Pod

The VOOPOO ITO-X pod is a refillable replacement pod for the VOOPOO Drag Q and Doric Q. It holds 2ml of e-liquid in the UK version, fills from the top, and uses the full range of VOOPOO ITO coils, which are sold separately. The pod includes two mouthpieces: a wider, shorter option and a narrower, taller option, so the draw style can be adjusted to suit the fitted coil.

It connects to the device via a magnetic buckle and is available in Black and Silver. The ITO-X is the top-filling pod designed for the Drag Q; the standard ITO pod used in the Doric 20 and Doric E is a different product with side filling.

VOOPOO ITO-X Pod Key Features

• 2ml e-liquid capacity (UK TPD version)
• Top-fill port with threaded cap
• Two mouthpieces included: wide and narrow
• Compatible with all VOOPOO ITO coils
• Press-fit coil installation
• Magnetic connection to device
• Stainless steel and PCTG construction
• Available in Black and Silver
• Sold as a single pod

Compatible Devices

The ITO-X pod is designed for use with the VOOPOO Drag Q and VOOPOO Doric Q. Both devices use the ITO-X pod as their primary refillable cartridge. The Doric E is also confirmed as compatible by VOOPOO. The ITO-X pod is not interchangeable with the standard ITO pod, which has a different form factor and is used in the Doric 20, Doric 60 and Doric E with side filling. If you are unsure which pod your device requires, the device name and pod type are printed on the original packaging or in the user manual.

ITO Coil Compatibility

The ITO-X pod accepts all four coils in the VOOPOO ITO range. Coils are not included with the pod and must be purchased separately. Fitting is press-fit: the coil pushes into the base of the pod and pulls out the same way, with no screwing required. The pod does not need to be fully empty before a coil change.

• ITO-M0 0.5 Ohm: 18 to 25W. RDL vaping, open draw. Best with 60% VG or higher e-liquids.
• ITO-M1 0.7 Ohm: 14 to 18W. Light MTL to RDL. Versatile across 50/50 and higher-VG blends.
• ITO-M2 1.0 Ohm: 10 to 14W. MTL vaping. Best with 50/50 e-liquids and nicotine salts.
• ITO-M3 1.2 Ohm: 8 to 12W. Tight MTL, closest to a cigarette draw. Best with high-PG e-liquids and nicotine salts.

The VOOPOO Drag X is a different device that uses PnP coils, not ITO coils. The ITO-X pod is not compatible with the Drag X.

Top Filling and Leak Resistance

The ITO-X pod fills via a threaded cap on the top of the pod. Unscrewing the cap reveals the fill port, which accepts most standard bottle nozzles without needing to remove the pod from the device. Replacing the cap firmly after filling reduces the risk of leaks. The pod uses a magnetic buckle to connect to the device, which holds it securely in place during normal use. Stainless steel and PCTG construction keeps the pod lightweight while maintaining a solid build quality.

Two Mouthpieces

Each ITO-X pod comes with two mouthpieces in the box. The wider, shorter option suits an open RDL draw with the 0.5 Ohm or 0.7 Ohm coil. The narrower, taller option produces a tighter draw closer to MTL and works well with the 1.0 Ohm and 1.2 Ohm coils. Swapping the mouthpiece takes a few seconds and makes a noticeable difference to the draw resistance without adjusting the device settings. Using a narrower mouthpiece with a lower-resistance coil is not recommended, as the restricted airflow can cause the coil to overheat.

Recommended E-Liquids

The ITO-X pod is suited to 50/50 (PG/VG) e-liquids and nicotine salts when used with the 1.0 Ohm and 1.2 Ohm MTL coils. Higher-PG e-liquids wick cleanly through these coils at low wattages and give a consistent throat hit. The 0.7 Ohm coil is versatile and accepts both 50/50 and higher-VG blends. The 0.5 Ohm RDL coil requires a higher-VG e-liquid, ideally 60% VG or above, to wick properly at the wattages it operates at. Using a thick high-VG shortfill in a 1.0 Ohm or 1.2 Ohm coil will result in slow wicking and a dry hit regardless of how well the coil has been primed.

VOOPOO ITO-X Pod Colours

• Black
• Silver

What's in the Box

• 1 x VOOPOO ITO-X replacement pod (2ml)
• 2 x mouthpieces (wide and narrow)

Coils are not included. VOOPOO ITO replacement coils are available separately in 0.5 Ohm, 0.7 Ohm, 1.0 Ohm and 1.2 Ohm. Prime the coil and allow it to soak for at least five minutes before first use.