OXVA Xlim Pro 2 Pod Vape Kit

OXVA Xlim Pro 2 Kit

The OXVA Xlim Pro 2 is the flagship pod kit in the standard Xlim range. It carries a 1300mAh battery that is 30% larger than the original Xlim Pro, a 0.56" HD colour screen with two animation themes, and a 30W maximum output with both Smart and manual wattage modes. The device supports dual activation, so you can either inhale to fire or press the button. A side airflow slider lets you adjust the draw from tight MTL to looser RDTL, and the single-button interface keeps everything simple enough for one-handed operation. 

The kit ships with two Xlim Top Fill pods (0.6Ω pre-installed and 0.8Ω) and is compatible with the entire Xlim pod range including V3, V2, EZ and Prefilled cartridges. USB-C fast charging at 2A gets the battery from flat to full in around 30 minutes. The Xlim Pro 2 is built from zinc alloy with IML and PCTG panels, weighs 67g, and is available in over twenty colours including limited-edition designs like Cosmos, Black Warrior and Rainbow Swirl.

OXVA Xlim Pro 2 Pod Kit Key Features

• 1300mAh battery with 2A USB-C fast charging
• 0.56" HD colour screen with animation themes
• 5-30W output with Smart and manual wattage modes
• Dual activation (0.01s auto-draw and button fire)
• Adjustable airflow slider for MTL and RDTL
• Compatible with all OXVA Xlim pods (0.4-1.2Ω)
• Two pods included (0.6Ω and 0.8Ω)
• Puff counter up to 99,999
• RGB light bar with battery status colours
• One-handed ergonomic button operation
• Zinc alloy body at 67g
• Over 20 colours including limited editions

1300mAh Battery with 2A USB-C Fast Charging

The Xlim Pro 2 packs a 1300mAh battery, which is 30% larger than the original Xlim Pro's 1000mAh cell. OXVA rates it for up to four days of use for light vapers, though regular users will more realistically get one to two days between charges. When the battery does run down, the 5V/2A USB-C fast charging brings it to 80% in around 25 minutes, with a full charge taking roughly 30 minutes. The screen displays the exact battery percentage in real time so you always know where you stand.

0.56" HD Colour Screen with Animation Themes

The Xlim Pro 2 has a 0.56" HD colour elliptical screen that sits flush with the body of the device. It displays wattage, coil resistance, battery percentage (both as a number and a bar) and a puff counter that tracks up to 99,999 puffs. OXVA claims a 200% higher pixel density and 50% better brightness compared to the original Xlim Pro. You can switch between two animation themes using the button, and the screen auto-dims when the device is idle. An RGB light bar along the bottom of the screen lights up whenever you take a puff or charge the device, shifting between green, blue, orange and red to show the current battery level.

5-30W Output with Smart and Manual Wattage Modes

In Smart Mode, the Xlim Pro 2 automatically detects the resistance of the pod you install and sets the wattage to the recommended range. With a 0.8Ω pod, it runs at 12-16W for a warm MTL draw. With a 0.6Ω pod, it pushes to 20-25W for RDTL vaping. With a 0.4Ω pod, it delivers the full 30W for more vapour. If you want to fine-tune the output, press the button three times quickly to enter manual wattage adjustment mode. You can then scroll through the 5-30W range to find your preferred setting.

Dual Activation

The Xlim Pro 2 supports both draw activation and button firing. The auto-draw responds in 0.01 seconds for near-instant vapour when you inhale. You can also press the button to fire the device if you prefer. Five clicks of the button turns the device on or off. Four clicks locks or unlocks the device, which prevents accidental firing in your pocket. When locked, a lock icon appears on the screen. If the device is not firing, check the lock status before anything else.

Adjustable Airflow Slider for MTL and RDTL

A sliding airflow control on the side of the device lets you adjust the draw resistance. Close it for a tighter, cigarette-style mouth-to-lung pull. Open it for a looser restricted direct-to-lung draw with more vapour. The slider is positioned next to the screen for easy thumb access and stays in place once set. The 0.8Ω pod with the airflow partially closed gives a solid MTL vape, while the 0.6Ω pod with the airflow more open suits RDTL draws.

Compatible with All OXVA Xlim Pods

The Xlim Pro 2 works with every pod in the OXVA Xlim range. That includes Xlim V3 Top Fill pods (0.4/0.6/0.8/1.2Ω), Xlim V2 side-fill pods, Xlim EZ snap-cap pods (0.4/0.6/0.8/1.2Ω), and the OXVA Xlim Prefilled pods that come ready to vape with nic salt e-liquid. The kit ships with two Xlim V3 Top Fill pods: a 0.6Ω (pre-installed) for RDTL vaping and a 0.8Ω for MTL. Both hold 2ml of e-liquid in line with UK TPD regulations and use the convenient top-fill system where you access the fill port without removing the pod from the device. All pods work with nic salt and freebase e-liquids.

One-Handed Ergonomic Button Operation

OXVA designed the Xlim Pro 2 for one-handed use. A single ergonomic button handles all device functions: five clicks to turn on or off, four clicks to lock or unlock, three clicks to enter wattage adjustment, and a single press to fire. The button is positioned for comfortable thumb access, and the interface avoids the complexity of multi-button setups. A built-in quick start guide is printed inside the packaging, so you can see the button functions without digging through the manual.

Zinc Alloy Body

The Xlim Pro 2 is built from zinc alloy with IML (in-mould labelling) and PCTG panels. At 114.5mm tall, 25mm wide and 15mm deep, it fits comfortably in the hand and slips into a pocket without adding bulk. The 67g weight gives it a solid, premium feel without being heavy. A lanyard is included in the box if you prefer to wear it around your neck for easy access.

OXVA Xlim Pro 2 Colours

The Xlim Pro 2 is available in a wide range of colours, with new limited-edition finishes added over time.

• Black Carbon
• Silver Carbon
• Dream Purple
• Platinum Grey
• Coral Pink
• Green Python
• Blue Python
• Brown Python
• Black Warrior (limited edition)
• Rainbow Swirl (limited edition)
• Cosmos (limited edition)
• Black and White
• Platinum Black
• Rose Pink
• Jungle Green
• Ocean Blue
• Amber Orange
• Dark Shadow
• Titanium Blue
• Titanium Grey
• Champion Blue (limited edition)

The Python range features an exotic textured pattern, while the limited-edition finishes like Cosmos, Rainbow Swirl and Black Warrior use bold, unique designs. The carbon finishes offer a more classic, understated look.

What's in the Box

• 1x OXVA Xlim Pro 2 device
• 1x Xlim Top Fill Cartridge 0.6Ω (2ml, pre-installed)
• 1x Xlim Top Fill Cartridge 0.8Ω (2ml)
• 1x USB Type-C cable
• 1x Lanyard
• 1x User manual
• 1x Button operation instructions

The kit includes two pods and a USB-C cable so you can start vaping straight away. Add your preferred nic salt or freebase e-liquid, fill the pod via the top-fill port, wait five to ten minutes for the cotton to prime, and you are ready to go. Additional pods in other resistances and filling styles can be purchased separately.