Vaporesso MTX Vape Coils

Vaporesso MTX Replacement Coils for the iTank M

The Vaporesso MTX coils are the dedicated replacement coils for the iTank M tank, which is paired with the Vaporesso GEN Fit kit. They are designed specifically for mouth to lung vaping, delivering the kind of tight, flavour-focused draw that suits vapers who prefer a style closer to smoking a cigarette.

Three resistance options are available: 0.8Ω, 1.2Ω and 1.4Ω, covering a range of output levels and nicotine preferences. All three use a simple push-fit installation that takes seconds and requires no tools. Sold in packs of five, they offer a cost-effective way to keep your iTank M performing at its best.

Vaporesso MTX Coils Key Features

• Compatible with the Vaporesso iTank M tank
• Three resistance options: 0.8Ω, 1.2Ω and 1.4Ω
• MTL vaping style
• Push-fit installation
• 5 coils per pack
• Works with 50/50 and high-PG e-liquids, including nic salts
• Consistent flavour delivery at lower wattages
• Genuine Vaporesso coils

Compatible with the Vaporesso iTank M Tank

The MTX coil series was built exclusively for the Vaporesso iTank M tank, which ships as standard with the GEN Fit kit. If you own a GEN Fit, these are the correct replacement coils. The iTank M uses a 510 thread connection and a bottom-mounted airflow control ring, and the MTX coils are the only coil series designed to fit and perform correctly in this tank. Using coils from other Vaporesso series, such as the GTX range, is not compatible with the iTank M, so it is worth checking the coil name before ordering. All three resistance variants covered below use the same physical format and fit identically into the tank.

Resistance Options: 0.8Ω, 1.2Ω and 1.4Ω

Three versions of the Vaporesso MTX coil are available, each suited to a slightly different output level and vaping preference. The 0.8Ω coil operates between 12 and 16W, making it the warmest and most vapour-forward option in the range. The 1.2Ω coil runs at 8 to 12W and is the most widely used, offering a well-balanced MTL draw with good flavour and manageable warmth. The 1.4Ω coil runs at 8 to 10W, producing a cooler and more restrained inhale that suits vapers who prefer a lighter vape or who are using higher nicotine concentrations. All three are sold in the same five-pack format.

MTL Vaping Style

MTL, or mouth to lung, describes a vaping style where you draw vapour into your mouth first before inhaling into your lungs, which mirrors the action of smoking a traditional cigarette. The Vaporesso MTX coils are built for this style, operating at wattages well below those used for direct to lung or sub-ohm vaping. The restricted draw and lower vapour output make MTL vaping more discreet and particularly well suited to higher-nicotine e-liquids, where a smaller volume of vapour delivers a satisfying hit without needing to inhale a large amount. If you are switching from smoking or already use an MTL setup, the GEN Fit with MTX coils is a natural fit.

Push-Fit Installation

The MTX coils use a push-fit design, meaning they press directly into the base of the iTank M coil housing without any threading or twisting. To swap a coil, remove the tank base, pull out the old coil and push the new one in until it clicks into position, then reassemble the tank. Before vaping on a new coil, allow three to five minutes for the e-liquid to fully saturate the wicking material. Starting at the lower end of the wattage range and gradually increasing output over the first few puffs also helps to extend the coil's lifespan and avoid the dry, burnt taste that can occur when a fresh coil is over-driven before it is primed properly.

5 Coils Per Pack

Each pack of Vaporesso MTX coils contains five units, keeping running costs low when you factor in how straightforward the replacement process is. Coil lifespan varies depending on how frequently you vape and which e-liquids you use, but many users report getting between one and two weeks from each coil under regular daily use. Sweeter e-liquids, particularly those with heavy flavouring, tend to shorten coil life as residue builds up on the wicking material more quickly. Sticking to the recommended wattage range and keeping the tank reasonably topped up will help you get the most from each coil.

E-Liquid Compatibility

The Vaporesso MTX coils work best with 50/50 (equal parts PG and VG) e-liquids and higher-PG blends. High-PG liquids are thinner in consistency, which helps them wick through the coil material more freely at lower wattages, keeping the coil moist and the flavour clean. Nic salt e-liquids, which are typically available in 50/50 blends at 10mg or 20mg nicotine strengths, are a particularly good match for MTL coils and work well with all three resistance options. Thick, high-VG shortfill e-liquids are not recommended, as the viscosity can restrict wicking at low wattages and lead to dry hits. If you are using freebase nicotine e-liquid, a 50/50 blend at your preferred strength will perform well.

Genuine Vaporesso Coils

These are authentic Vaporesso MTX coils manufactured to the same specification as the coil supplied with the GEN Fit kit. Genuine coils carry an authenticity sticker and maintain the correct resistance tolerance, which matters for consistent performance and compatibility with the GEN Fit's AXON chip. The chip reads coil resistance to manage power output and pulse mode delivery, so using off-brand or counterfeit alternatives can affect both performance and the accuracy of the device's power settings. Buying from a reputable UK stockist ensures the coils you receive are genuine and MHRA-compliant.

What's in the Box

• 5 x Vaporesso MTX coils (choose your resistance at the point of purchase)

Select your preferred resistance when adding to your basket.