VOOPOO TPP Coils
- Quick heat-up from mesh
- Press in by hand, no tools
- Four models, two draw styles
- Three coils to a pack
Why you'll love it
- Mesh heating warms up quickly and spreads heat across a wider surface
- Press the coil in by hand: no tools and no fuss
- Two draw styles: open direct lung or a tighter half direct lung
- Suits high VG liquid, with nicotine kept to 10mg or less
- One pack gives you three coils of the same model, ready to swap in as each one wears
- TPP tanks only: PnP parts need a different coil
At a glance
- Replaceable pods
- Yes
- Brand
- VOOPOO
- Model
- TPP Coils
- Resistance / power: TPP-DM1
- 0.15 ohm, 60-80W, direct lung
- Resistance / power: TPP-DM2
- 0.2 ohm, 40-60W, direct lung
- Resistance / power: TPP-DM3
- 0.15 ohm, 80-100W, direct lung
- Resistance / power: TPP-DM4
- 0.3 ohm, 32-40W, half direct lung
- Coil type
- Mesh
- Installation
- Press-fit
- Recommended e-liquid
- High VG (about 70% or more), nicotine 10mg or less
- Compatible with
- TPP Pod Tank, TPP-X Pod Tank, TPP Pod Tank 2; not PnP pods or tanks
- Resistance options
- TPP-DM1 (0.15 ohm Mesh), TPP-DM3 (0.15 ohm Mesh), TPP-DM2 (0.2 ohm Mesh), TPP-DM4 (0.3 ohm Mesh)
Description
About these coils
When flavour fades or the draw turns flat in a TPP tank, a fresh coil is usually the quickest way back to how it felt on day one. These are VOOPOO's own mesh coils for that platform. There are four models, so you can match the coil to the way you like to vape.
The mesh is a patented design that gives the liquid more surface to vaporise from, and it warms up faster as a result. Fitting takes seconds. Slide the pod or tank off the device, tug the used coil out in a straight line, then push the new one home until it stops. Once it is in, fill the tank and leave it a few minutes so the coil can soak up liquid before you vape.
Fits these kits
The tank decides fitment. These coils are made for three TPP tanks: the TPP Pod Tank, the TPP-X Pod Tank and the TPP Pod Tank 2.
The maker's list of VOOPOO kits that use those tanks, grouped by series:
- Drag series: the Drag 3 is listed. The Drag X Plus and Drag X Plus Pro are listed once they carry a TPP pod tank. The Drag X Pro is listed when you pair it with the TPP-X Pod Tank.
- Argus series: only the Maat Edition of the Argus XT and the Argus MT appears on the list.
PnP pods and PnP tanks use a different coil system, so these are not an option for them.
Picking a resistance
Think of resistance as the dial for how the pull feels. Lower numbers give a warm, airy draw and more cloud, and they work well with thick, high VG liquid. Higher numbers feel snugger and cooler. The four models below run from the gentlest power range to the hardest-driving:
- TPP-DM4, 0.3 ohm: half direct lung, running at 32-40W. It gives the snuggest, coolest pull here.
- TPP-DM2, 0.2 ohm: direct lung at 40-60W, a little calmer than the two 0.15 ohm coils.
- TPP-DM1, 0.15 ohm: direct lung at 60-80W, giving a warm pull with plenty of air.
- TPP-DM3, 0.15 ohm: also direct lung, but meant for 80-100W if you like to run the device harder.
For liquid, a thick high VG blend (about 70% VG or above) with nicotine at 10mg or under is what these coils are built for.
Specification
| Specification | Detail |
|---|---|
| Brand | VOOPOO |
| Model | TPP Coils |
| Resistance / power: TPP-DM1 | 0.15 ohm, 60-80W, direct lung |
| Resistance / power: TPP-DM2 | 0.2 ohm, 40-60W, direct lung |
| Resistance / power: TPP-DM3 | 0.15 ohm, 80-100W, direct lung |
| Resistance / power: TPP-DM4 | 0.3 ohm, 32-40W, half direct lung |
| Coil type | Mesh |
| Installation | Press-fit |
| Recommended e-liquid | High VG (about 70% or more), nicotine 10mg or less |
| Compatible with | TPP Pod Tank, TPP-X Pod Tank, TPP Pod Tank 2; not PnP pods or tanks |
| Resistance options | TPP-DM1 (0.15 ohm Mesh), TPP-DM3 (0.15 ohm Mesh), TPP-DM2 (0.2 ohm Mesh), TPP-DM4 (0.3 ohm Mesh) |
What's in the box
- 3 x VOOPOO TPP coils of your chosen model per pack
Delivery & returns
-
Free Next-Day Delivery
On orders over £35
-
7-day dispatch
Same-day processing before 4pm, every day
-
Discreet tracked delivery
Plain packaging, full tracking
-
Expert support team
No chatbots. Speak to an expert.
VOOPOO TPP Coils FAQs
Can I use a 50/50 e-liquid with TPP coils?
It is not what these coils are designed for. The maker recommends thick, high VG liquid, about 70% VG or more, with nicotine at 10mg or less. A thinner 50/50 blend moves away from that.
Do these coils fit the Drag X Plus or Drag X Pro?
Yes, with the right tank. The Drag X Plus and Drag X Plus Pro take them through a TPP pod tank, while the Drag X Pro needs the TPP-X Pod Tank. The Drag 3 kit is listed as well.
Will they work in an Argus XT or Argus MT?
Only the Maat Edition of each kit is listed by the maker. If your Argus XT or Argus MT is a different edition, these are not the right coils for it.
How long should a new coil soak before I vape?
A few minutes. Seat the coil fully, fill the tank, then wait so the coil can take up liquid. Vaping too soon can leave it under-soaked, so a short pause helps.
18+ For adults only. This product contains nicotine which is a highly addictive substance. We check age at checkout.