Aspire Pixo Replacement Pods

£4.99 incl. VAT

One pod across the Pixo range
Fresh coil with every pod
Fill it with your own liquid
Snug or open draw, your pick

Why you'll love it

Covers five Aspire kits, Pixo Aura 2 included
Every pod brings a new mesh coil, so there are no coil changes to manage
Top up through the side port with a liquid you already like
Choose how you like to draw: snug and cool, or open and warm
Suits both nic salt and freebase liquids, within the VG range for each resistance
2ml per pod, the UK TPD capacity

Replaceable pods: Yes
Brand: Aspire
Model: Pixo
Pod style: Refillable, side fill
Pod capacity: 2ml
Coil: Built-in mesh coil, non-replaceable
Fits: Aspire Pixo, Pixo Neo, Pixo Max, Pixo Aura and Pixo Aura 2
Resistance options: 0.4ohm, 0.6ohm, 1.0ohm

Description

About these pods

Each pod comes with its mesh coil already built in, so there is nothing to assemble. Fill it through the port on the side, leave it for five minutes as Aspire advises, then fit it to your kit.

A pod holds 2ml. You cannot change the coil by itself. When a pod wears out, the whole pod goes and a new one takes its place. That is the only part you need to buy.

Fits these kits

Aspire lists this pod for five kits:

Pixo
Pixo Neo
Pixo Max
Pixo Aura
Pixo Aura 2

We confirm those five and no others. If your device is not on the list, check before you order.

Picking a resistance

Resistance changes how each draw feels. A lower figure gives a warmer, airier pull with more vapour. A higher figure gives a tighter, cooler MTL pull. Here is what each of the three is for.

0.4ohm is the open, warm option, and it produces the most vapour. Aspire's power guide is 23-30W. Nic salt and freebase both work, as long as the VG sits between 50% and 60%, so a thicker liquid is the right match.

0.6ohm gives a little more air and warmth than the 1.0ohm, and a little less than the 0.4ohm. Aspire suggests 14-19W. Either nic salt or freebase is fine, provided the VG is somewhere from 40% to 60%.

1.0ohm is the snug, cool one, with the most restrained pull of the three. Run it at 10-15W. It accepts the same 40-60% VG range as the 0.6ohm, in nic salt or freebase.

Specification

Specification	Detail
Brand	Aspire
Model	Pixo
Pod style	Refillable, side fill
Pod capacity	2ml
Coil	Built-in mesh coil, non-replaceable
Fits	Aspire Pixo, Pixo Neo, Pixo Max, Pixo Aura and Pixo Aura 2
Resistance options	0.4ohm, 0.6ohm, 1.0ohm

Delivery & returns

Free Next-Day Delivery

On orders over £35
7-day dispatch

Same-day processing before 4pm, every day
Discreet tracked delivery

Plain packaging, full tracking
Expert support team

No chatbots. Speak to an expert.

Aspire Pixo Replacement Pods FAQs

Which pod goes in my Pixo Neo?

The Aspire Pixo Pod. Aspire lists it for the Pixo Neo, and the same pod also fits the Pixo, Pixo Max, Pixo Aura and Pixo Aura 2, so one choice covers all five kits.

Do I need to wait after filling a new pod?

Yes, give it about five minutes. Aspire advises this for every freshly filled pod so the cotton has time to soak through. Fill it, set it down, then fit it to your kit.

What power suits the 1.0ohm pod?

Aspire suggests 10-15W for the 1.0ohm pod. It takes nic salt or freebase with a VG between 40% and 60%, and it gives a snug, cool draw.

How much liquid fits in one pod?

Each pod holds 2ml, the UK TPD capacity. You fill it through the side port. The mesh coil is built in and cannot be swapped on its own, so you replace the pod when it wears out.