{"title":"Coils\/Pods","description":"","products":[{"product_id":"aspireodancoil","title":"Aspire Odan Replacement Coils – 3 Pack","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Odan Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you have an Aspire Odan, Odan Mini or Odan EVO tank, these are the coils you need. The Aspire Odan replacement coils come in a pack of three and are available in three mesh variants: 0.18Ω, 0.2Ω and 0.3Ω. All three are sub-ohm mesh coils built for direct-to-lung (DTL) vaping, so you will need a capable mod that can reach at least 35W to use them properly. The mesh build gives you a larger heating surface than a standard coil, which means faster warm-up, more consistent output and noticeably better flavour. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe wicking material is an 80\/20 blend of linen cotton and organic cotton, which handles heat well and absorbs e-liquid quickly. These are plug-and-play coils, so changing them is straightforward: unscrew the base of the tank, pull out the old coil and press the new one in. Worth noting that these are also sometimes listed as Odan Mini coils, as the same coils fit both the full-size Odan and the Mini.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Odan Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of three replacement coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree variants: 0.18Ω, 0.2Ω and 0.3Ω mesh\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAll variants use a mesh coil build for better flavour and longer coil life\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e80\/20 linen cotton and organic cotton wicking for fast saturation and heat resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePlug-and-play press-fit installation, no tools needed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Aspire Odan, Odan Mini and Odan EVO tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest paired with high-VG e-liquids (60% VG or above)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSub-ohm coils\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCoil Variants\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThere are three resistance options. Here is what each one is best suited to.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003cstrong\u003e0.18Ω mesh coil\u003c\/strong\u003e, recommended wattage 60 to 80W.\u003c\/span\u003e\u003cspan\u003e This is the highest-output option and the one to go for if you want big, dense clouds with intense flavour. It runs warm and rewards a high-VG shortfill, ideally 70% VG or above. Use it at the lower end of the range first to let the coil bed in, and step up the wattage from there. This is a serious sub-ohm coil that suits experienced cloud-chasers and flavour-focused DTL vapers.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003cstrong\u003e0.2Ω mesh coil\u003c\/strong\u003e, recommended wattage 50 to 60W.\u003c\/span\u003e\u003cspan\u003e The most popular choice for everyday Odan use. You still get excellent flavour and a satisfying DTL draw, but at a slightly lower wattage it is a bit more manageable for all-day vaping and is a little kinder on your e-liquid. A 60 to 70% VG e-liquid works well here. If you are not sure where to start with the Odan range, this is a solid middle ground. This is also the variant most people mean when they search for Aspire Odan 0.3 coils and land on the wrong page, so worth double-checking your resistance before ordering.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003cstrong\u003e0.3Ω mesh coil\u003c\/strong\u003e, recommended wattage 35 to 45W.\u003c\/span\u003e\u003cspan\u003e The most accessible option in the range, and the one we would point newer sub-ohm vapers towards first. It runs at a lower wattage, which means the draw is a bit cooler and the e-liquid goes further. Flavour is still excellent thanks to the mesh build. If you have been searching specifically for \"aspire odan 0.3 coils\", this is exactly what you are after. A 60% VG e-liquid is the right starting point.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDevice Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese coils fit all three of the following Aspire tanks. The same coil works across the full Odan range, so you only need to pick your preferred resistance rather than worrying about which version of the tank you have.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Odan Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Odan Mini Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Odan EVO Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese coils are not compatible with any other Aspire tank range. They will not fit the Nautilus series, the Cleito series, the PockeX or any other Aspire product outside the Odan family. If you are unsure which coil your tank takes, check your tank page or drop us a message and we will point you in the right direction.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMesh Coil Build and Wicking\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll three Odan coil variants use a mesh heating element rather than a traditional wire coil. The practical difference is that mesh has a much larger surface area in contact with your e-liquid, so it heats evenly, ramps up quickly and tends to produce cleaner, fuller flavour from the first draw. Mesh coils are also less prone to the hot spots that cause a burnt taste, which generally means they last longer than standard coils at similar wattages. The wick is an 80\/20 blend of linen cotton and organic cotton. The linen component handles high temperatures well and resists degradation at the wattages these coils operate at, while the organic cotton absorbs e-liquid quickly to keep the mesh saturated. Give the coil a good prime before your first use and you will get the best out of it from the start.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Guide\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll three Odan coil variants are designed for high-VG e-liquids. As a rule, you want 60% VG or higher, and a 70\/30 or 80\/20 VG\/PG blend is ideal for the 0.18Ω and 0.2Ω coils at higher wattages. High-VG shortfill e-liquids are a natural match here: they produce thick, smooth vapour and work well with the mesh build. Because the vapour output is substantial, we would suggest keeping your nicotine strength at 6mg or below, and 3mg is comfortable for most vapers at these wattage levels. Nicotine salts are not well suited to sub-ohm coils at these wattages due to the harshness at higher outputs, so stick to freebase e-liquids for the best experience.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3 x Aspire Odan replacement coils (select your variant at checkout)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.2 Ohm","offer_id":31805428564042,"sku":"6958947129428","price":12.99,"currency_code":"GBP","in_stock":false},{"title":"0.3 Ohm","offer_id":31805428662346,"sku":"6958947129640","price":12.99,"currency_code":"GBP","in_stock":false},{"title":"0.18 Ohm","offer_id":31805428727882,"sku":"6958947131087","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/aspire-coils-aspire-odan-coils-pack-of-3-buy-aspire-odan-coils-pack-of-3-vapeology-14328491638858.jpg?v=1641925355"},{"product_id":"aspirenautilusxcoil","title":"Aspire Nautilus X Replacement Coils – 5 Pack","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus X Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you have a Nautilus X tank, a Nautilus XS tank, a PockeX kit or a Rover 2, these are the coils you need. The Aspire Nautilus X replacement coils come in packs of five and are available in three variants: 1.5Ω and 1.8Ω U-Tech coils for a tighter mouth-to-lung draw, and the 0.7Ω XS Mesh coil if you want a little more airflow and vapour. All three are built for mouth-to-lung (MTL) vaping, which makes them a great pick whether you are switching from smoking or simply prefer that closer, cigarette-like draw. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe standout feature on the 1.5Ω and 1.8Ω options is Aspire's U-Tech design: the vapour travels through a U-shaped chamber and passes the heating element twice before it reaches you, which noticeably deepens the flavour without you needing to push the wattage up. You may also see these listed as Nautilus X atomizers or Nautilus XS coils in various places – they are all the same product.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus X Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of five replacement coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree variants: 1.5Ω U-Tech, 1.8Ω U-Tech and 0.7Ω XS Mesh\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eU-Tech airflow passes vapour through the coil twice for richer flavour\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eKanthal heating elements with organic cotton wicking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAll three variants suit mouth-to-lung vaping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with the Nautilus X tank, Nautilus XS tank, PockeX kit and Rover 2 kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHigh-PG or 50\/50 e-liquids recommended for the 1.5Ω and 1.8Ω; 50\/50 recommended for the 0.7Ω mesh\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThreaded fit, quick and easy to swap with no tools needed\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCoil Variants\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot sure which resistance to go for? Here is a quick guide to each option.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003cstrong\u003e1.5Ω U-Tech coil\u003c\/strong\u003e, recommended wattage 14 to 20W.\u003c\/span\u003e\u003cspan\u003e This is the most popular choice for Nautilus X and PockeX users and the one we would point most people towards. It gives you a satisfying MTL draw with good flavour and keeps vapour output discreet enough for all-day use. Pair it with a high-PG or 50\/50 e-liquid, and nicotine salts work particularly well if you want smooth, higher-strength hits. If you have been searching for the right wattage for a 1.5Ω coil on this tank, 14 to 20W is your answer.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003cstrong\u003e1.8Ω U-Tech coil\u003c\/strong\u003e, recommended wattage 12 to 16W.\u003c\/span\u003e\u003cspan\u003e Go for this one if you want the closest feel to smoking a cigarette. It runs at a lower wattage, produces the least vapour of the three, and delivers a tight, clean draw that lets the flavour of your e-liquid do the talking. A high-PG juice is the right match. It is ideal for stealthy vaping and for anyone who has recently switched from cigarettes and wants something familiar.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003cstrong\u003e0.7Ω XS Mesh coil\u003c\/strong\u003e, recommended wattage 18 to 22W.\u003c\/span\u003e\u003cspan\u003e This is the Nautilus XS coil variant and the one to go for if you want a bit more airflow and vapour than the U-Tech options offer. The mesh heating surface warms up faster and gives more consistent output. It still sits firmly in MTL territory, so you are not getting big clouds, but the draw is noticeably airier than the 1.5Ω or 1.8Ω. A 50\/50 PG\/VG e-liquid works best here.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDevice Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese coils fit all four of the following devices. If you are still not sure which resistance to choose, a good starting point is the 1.8Ω for tight MTL vapers or recent switchers from cigarettes, the 1.5Ω for everyday MTL use, and the 0.7Ω mesh if you want a bit more vapour while staying mouth-to-lung.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Nautilus X Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Nautilus XS Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire PockeX Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Rover 2 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOne important thing to know before you order: these are not the same as the standard Nautilus BVC coils used in the Nautilus, Nautilus 2, Nautilus Mini, Nautilus 3 and Nautilus 2S. They also do not fit the Triton or Atlantis series, or the Nautilus Prime X, which uses a completely different coil platform. If you are not sure which coil your device takes, check your tank or kit page, or drop us a message and we will help you find the right one.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eU-Tech Coil Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe U-Tech design is what makes the 1.5Ω and 1.8Ω coils worth talking about. Inside each one, the airflow is guided through a U-shaped chamber so the vapour crosses the heating element twice before it reaches the mouthpiece. In practice, this means you get noticeably richer flavour than you would expect at these wattage levels. The coils also have enlarged juice ports that can handle e-liquids up to 80% VG, though a high-PG juice will still give you the best flavour and the longest coil life at these resistances.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Guide\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the 1.5Ω and 1.8Ω coils, a high-PG or 50\/50 PG\/VG e-liquid is the right choice. The higher PG content flows readily through the cotton wick and gives you a sharper, cleaner flavour that suits this style of vaping nicely. Nicotine salts are a great match here, especially if you are using these coils as part of a switch from smoking and want a smooth delivery at 10mg to 20mg. For the 0.7Ω XS Mesh coil, a 50\/50 blend works well, and because the draw is airier and the vapour output higher, lower nicotine strengths of 3mg to 10mg tend to feel more comfortable. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhatever liquid you go with, make sure you prime the coil properly before your first use: add a few drops directly to the cotton, fill the tank, and give it a few minutes to soak in before you start vaping. It is a small step that makes a real difference to flavour and coil life.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x Aspire Nautilus X replacement coils (selected variant)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.7 ohm","offer_id":31805466443850,"sku":"11447","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"1.5 ohm","offer_id":31805466378314,"sku":"6958947120623","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"1.8 ohm","offer_id":31805466411082,"sku":"6958947123266","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/aspire-coils-aspire-nautilus-x-xs-coils-pack-of-5-buy-aspire-nautilus-x-xs-coils-pack-of-5-vapeology-14255778562122.png?v=1641930387"},{"product_id":"aspireprocoil","title":"Aspire AVP Pro Replacement Coils – 5 Pack","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire AVP Pro Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Aspire AVP Pro replacement coils come in a pack of five and are available in two variants: a 0.65Ω mesh coil and a 1.15Ω standard Kanthal coil. Both are press-fit coils that push into the bottom of your AVP Pro replacement pod, and both cover a narrow MTL and restricted draw vaping style – this is not a sub-ohm or DTL coil range. The key difference between the two is how the device handles power when each coil is installed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWith the 1.15Ω coil fitted, you can select from four wattage levels using the mode button. With the 0.65Ω mesh coil fitted, the device switches to bypass mode automatically, outputting between 10 and 16W depending on your current battery level – you cannot manually adjust the wattage with this coil. These coils are also compatible with several other Aspire devices beyond the AVP Pro itself.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire AVP Pro Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of five replacement coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo variants: 0.65Ω mesh and 1.15Ω standard Kanthal AF\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation – push into the bottom of the AVP Pro replacement pod\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eA coil removal tool is included in the AVP Pro kit box to help with extraction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with AVP Pro, AVP Cube, Zero G and Tekno AVP Pod kits\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBoth variants suited to MTL and restricted-draw vaping styles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest paired with 50\/50 freebase or nicotine salt e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire hologram and scratch authentication sticker on the box\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCoil Variants\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThere are two coil options. Here is how they perform differently and which one suits which style of vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003cstrong\u003e0.65Ω mesh coil\u003c\/strong\u003e.\u003c\/span\u003e\u003cspan\u003e When this coil is installed, the AVP Pro runs in bypass mode – the device feeds direct voltage from the battery to the coil, which translates to roughly 10-16W depending on how charged your battery is. You cannot select a specific wattage with this coil, so the output will gradually decrease as the battery drains. The mesh build gives you better flavour and slightly more vapour than the standard coil. The draw is still MTL but a touch warmer and denser, particularly with the airflow more open. A 50\/50 freebase or nicotine salt at 10-20mg works well here. High-VG e-liquids above 60% VG are not recommended for the AVP Pro pod system.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003e\u003cstrong\u003e1.15Ω standard Kanthal coil\u003c\/strong\u003e.\u003c\/span\u003e\u003cspan\u003e With this coil fitted you get full wattage control across four preset levels: 10W (red LED), 12W (blue LED), 14W (green LED) and 16W (white LED). Double-press the mode button to cycle through them. Most vapers settle at 12 or 14W for a consistent MTL draw with good flavour and a clean throat hit. This is the coil to choose if you want predictable, adjustable output and are using nicotine salts at 10-20mg or a 50\/50 freebase. It is also the coil that most closely mimics the feel of smoking a cigarette.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDevice Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe AVP Pro coils are not exclusive to the AVP Pro kit. The same coil fits several other Aspire devices. If you have been searching for the \"aspire tekno avp pro coil\", \"aspire avp pod\" coils, or replacement coils for the Zero G kit, these are the correct coils for all of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire AVP Pro Pod Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire AVP Cube Pod Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Zero G Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Tekno AVP Pod\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese coils are designed specifically for the AVP Pro pod platform. They are not compatible with any other Aspire coil range. If you are unsure whether these coils fit your device, check your kit page or contact us and we will confirm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFitting and Priming\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTo fit a new coil, remove the pod from the device, push the new coil into the bottom of the pod until it clicks firmly into place. A coil removal tool ships in the AVP Pro kit box to help pull the old coil out cleanly without needing to force it with your fingers. Once the new coil is fitted, fill the pod, replace the silicone fill valve and let it stand for three to five minutes before vaping. Starting at a lower wattage and building up over the first few draws also helps the coil bed in properly and extends its life.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Guide\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe AVP Pro coil range is built for tight, MTL-style vaping. Both variants work best with thinner, higher-PG e-liquids that wick quickly through a small coil surface. A 50\/50 freebase e-liquid or a nicotine salt is the right match for either coil. Nicotine salts between 10mg and 20mg are a good starting point and suit the low-to-mid wattage output of both variants. High-VG e-liquids of 70% VG or above are not well suited to this pod system and can cause dry hits or reduced coil life. If you are using the 0.65Ω mesh coil and want to try slightly higher VG, 60% VG is the maximum most sources recommend.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x Aspire AVP Pro replacement coils\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.65 Ohm (Mesh)","offer_id":31805683859530,"sku":"11394","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"1.15 Ohm","offer_id":31805683892298,"sku":"11395","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/aspire-coils-aspire-avp-pro-coils-pack-of-5-buy-aspire-avp-pro-coils-pack-of-5-vapeology-14328406835274.png?v=1641907709"},{"product_id":"voopoo-pnp-coils","title":"VOOPOO PnP Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP replacement coils are sold in packs of five and cover everything from tight mouth-to-lung vaping at low wattages up to high-power direct-to-lung sub-ohm vaping. The range divides into three sub-series: the VM (Vertical Mesh) series for DTL and RDL, the TW (Twist Wire) series for high-wattage DTL, and the TM (Twisted Mesh) series for MTL. All ten variants share the same plug-and-play press-fit fitting, so any coil drops straight into any PnP-platform pod or tank without tools. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eResistances span 0.15 Ohm to 0.8 Ohm, making VOOPOO PnP coils one of the most versatile replacement coil platforms across the brand's device range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP Replacement Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePack of 5 coils per pack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTen variants: VM1, VM3, VM4, VM5, VM6, TM1, TM2, TW15, TW20, TW30\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eVM series: 0.15 to 0.6 Ohm, DTL and RDL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTW series: 0.15 to 0.3 Ohm, high-wattage DTL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTM series: 0.6 to 0.8 Ohm, MTL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMesh heating element on all variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePlug-and-play press-fit installation, no tools needed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCompatible with all VOOPOO PnP-platform devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMatch coil wattage range to your device before ordering\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePnP coils are not interchangeable with PnP X coils\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-pnp-replacement-coils-spec-1.webp?v=1772798894\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eVM Series: VM1, VM3, VM4, VM5, VM6\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe VM (Vertical Mesh) series covers five resistance options for DTL and RDL vaping. All five variants use a vertical mesh construction and are designed for high-VG or 60\/40 e-liquids, with the VM4 also accepting 50\/50 blends and nicotine salts up to 25mg.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003ePnP-VM6:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e0.15 Ohm, 60 to 80W, DTL. The highest-power option in the VM series. Produces a fully open DTL draw with high vapour volume. Requires a device capable of at least 60W and a high-VG shortfill.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003ePnP-VM5:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e0.2 Ohm, 40 to 60W, DTL. Mid-range DTL coil with a good balance of flavour and cloud output. Well-suited to devices in the 40 to 60W range such as the Drag S.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003ePnP-VM1:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e0.3 Ohm, 32 to 40W, RDL. A slightly restricted DTL draw and the most versatile VM coil across mid-powered VOOPOO devices. Suits high-VG or 70\/30 e-liquids at up to 10mg.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003ePnP-VM3:\u003c\/strong\u003e\u003cspan\u003e 0.45 Ohm, 25 to 35W, RDL. More airflow than a standard MTL coil without requiring a high-powered device. Accepts e-liquids up to 25mg.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003ePnP-VM4:\u003c\/strong\u003e\u003cspan\u003e 0.6 Ohm, 20 to 28W, RDL. A popular mid-range option that runs on most VOOPOO pod kits. Suits 50\/50, 60\/40 and nicotine salts up to 25mg.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTW Series: TW15, TW20, TW30\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TW (Twist Wire) series uses a twist-wire mesh construction built for more even heat distribution at high wattages. All three variants require high-VG shortfills and freebase nicotine at no more than 10mg. The TW15 and TW20 tend to run slightly cooler than equivalent-resistance VM coils at the same wattage setting, which many vapers find produces cleaner flavour clarity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003ePnP-TW15:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e0.15 Ohm, 55 to 70W, DTL. The highest-power option in the TW series. Broadly comparable to the VM6 but with a lower wattage ceiling and cooler running at the same setting.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003ePnP-TW20:\u003c\/strong\u003e\u003cspan\u003e 0.2 Ohm, 40 to 55W, DTL. Mid-range DTL coil and a close equivalent to the VM5. Delivers good flavour clarity with shortfills on devices in the 40 to 55W range.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003ePnP-TW30:\u003c\/strong\u003e\u003cspan\u003e 0.3 Ohm, 28 to 40W, RDL. Restricted DTL draw, comparable to the VM1. Suits devices in the 30 to 40W range with high-VG or 70\/30 e-liquids.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTM Series: TM1, TM2\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TM (Twisted Mesh) series covers the MTL end of the PnP range and is the best starting point for vapers switching from smoking. Both coils pair well with 50\/50 e-liquids and nicotine salts up to 35mg, making them well-suited to higher-nicotine setups.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003ePnP-TM1:\u003c\/strong\u003e\u003cspan\u003e 0.6 Ohm, 20 to 25W, MTL. A slightly more open MTL draw with a warmer vapour output. Works on most VOOPOO pod kits and lower-powered mods.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cstrong\u003ePnP-TM2:\u003c\/strong\u003e\u003cspan\u003e 0.8 Ohm, 12 to 18W, tight MTL. The most restricted draw in the PnP range, closest to a cigarette-style inhale. The recommended starting point for anyone switching from smoking.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMesh Heating Element\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery coil in the PnP range uses a mesh heating element rather than a round-wire construction. Mesh covers a larger surface area, heats more evenly and produces consistent flavour from the first pull through to the end of the coil's life. Heat-up time is faster than a round-wire equivalent at the same wattage, and the design is more resistant to dry hits during normal use. Sweetened e-liquids and dessert flavours containing sucralose will shorten coil life on any mesh coil, so pairing PnP coils with quality, low-sucralose e-liquids will extend how long each coil lasts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-pnp-replacement-coils-spec-2.webp?v=1772798927\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePlug-and-Play Press-Fit Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePnP coils press directly into the base of any PnP-compatible pod or tank: no threading, no screwing and no tools required. Removing a spent coil is done by pushing it out from the opposite end. Before first use, fit the coil, fill the pod or tank, and allow at least five minutes for the wick to saturate before vaping. Starting at the lower end of the coil's wattage range and increasing gradually helps avoid a dry hit on the first draw and extends the coil's working life.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePnP coils fit any VOOPOO device on the PnP platform. Not every coil suits every device, so always check the coil's wattage range against your device's maximum output before ordering. Compatible devices include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO Drag Max\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO Drag S and Drag X (original versions, not Pro)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO Argus Pro and Argus GT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO Argus Air\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO Vinci 2, Vinci X and Vinci\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO Doric 60\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP Pod Tank and PnP Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAny other VOOPOO device specifying PnP coil compatibility\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMatch Coil Wattage Range to Your Device\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChoosing the right PnP coil depends on three things: your device's maximum wattage output, your preferred draw style, and your e-liquid type. Start with your device's maximum output and rule out any coil whose minimum wattage exceeds it. From there, the VM and TW series cover DTL and RDL vaping for vapers using shortfills and freebase nicotine at 10mg or below. The TM series covers MTL vaping for vapers using nicotine salts or higher-PG e-liquids. If you are switching from smoking or new to sub-ohm vaping, the PnP-TM2 offers the most cigarette-like draw in the range and is the safest starting point.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePnP Coils Are Not Interchangeable with PnP X Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePnP X is a newer coil platform used across VOOPOO's more recent devices and is not compatible with the original PnP platform. Both use a similar press-fit style but differ in internal dimensions and are not designed to fit each other's pods or tanks. If your device is from the Drag 5, Drag X3, Drag S3 or Vinci E120 range, it takes PnP X coils. If you are unsure, check the coil type listed in your device's user manual or on the original packaging before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Pack\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e5 x VOOPOO PnP coils (one variant per pack)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voopoo","offers":[{"title":"PnP-VM1 0.3 Ohm","offer_id":31805685235786,"sku":"6941291500418","price":13.88,"currency_code":"GBP","in_stock":true},{"title":"PnP-VM3 0.45 Ohm","offer_id":40340629848138,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":true},{"title":"PnP-VM4 0.6 Ohm","offer_id":39300449435722,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":false},{"title":"PnP-VM5 0.2 Ohm","offer_id":32463898935370,"sku":"11973","price":13.88,"currency_code":"GBP","in_stock":true},{"title":"PnP-VM6 0.15 Ohm","offer_id":32463898968138,"sku":"11974","price":13.88,"currency_code":"GBP","in_stock":true},{"title":"PnP-TM1 0.6 Ohm","offer_id":39362870345802,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":false},{"title":"PnP-TM2 0.8 Ohm","offer_id":39300449992778,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":true},{"title":"PnP-M2 0.6 Ohm","offer_id":31805685301322,"sku":"6970810468052","price":13.88,"currency_code":"GBP","in_stock":false},{"title":"PnP-TW15 0.15 Ohm","offer_id":40340629880906,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":true},{"title":"PnP TW30 0.3 Ohm","offer_id":40294139592778,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":true},{"title":"Pnp-TW20 0.2 Ohm","offer_id":40565817737290,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":true},{"title":"PNP-TW60 0.6 Ohm","offer_id":41617142448202,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/voopoo-coils-pnp-vm1-0-3-ohm-voopoo-pnp-coils-pack-of-5-buy-voopoo-pnp-coils-pack-of-5-vapeology-28307615580234.jpg?v=1641900863"},{"product_id":"aspirenautiluscoil","title":"Aspire Nautilus Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus BVC Coils 5 Pack\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus replacement coils are sold in packs of 5 and cover the full Nautilus tank range from the original Nautilus through to the Nautilus 2, Nautilus 2S, Nautilus 3, Nautilus GT, Nautilus Mini, and Nautilus Nano. The range includes both BVC (Bottom Vertical Coil) and mesh variants, covering everything from a tight MTL draw at 1.8Ω right through to an open RDTL vape at 0.3Ω. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe BVC design orients the coil vertically within the atomiser head, which improves wicking consistency and produces clean, stable flavour throughout the life of the coil. Choosing the right resistance determines both your draw style and your e-liquid options, so the sections below cover each variant in full.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Nautilus Coil Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold in packs of 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBVC (Bottom Vertical Coil) and mesh variants available\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eEight resistance options from 0.3Ω to 1.8Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCovers MTL and RDTL vaping styles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with the Nautilus 2, 2S, 3, Nautilus GT, Nautilus GT Mini, Nautilus Mini, Nautilus Nano, and original Nautilus (MTL coils only)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAlso fits the Aspire Zelos 3, Zelos M80, Nautilus AIO, K3, and Triton Mini\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOrganic cotton wick construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWorks best with 50\/50, high-PG, and nic salt e-liquids; higher VG compatible at lower resistances\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMTL Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe MTL coil options give a tight, cigarette-like draw with low vapour production. These are the coils used by most Nautilus vapers and are the best choice if you are switching from cigarettes or want a discreet, low-output vape.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.8Ω BVC: \u003c\/strong\u003e10-14W, classic Nautilus coil for tight MTL vaping, use with nic salts and high-PG e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.8Ω NS AIO: \u003c\/strong\u003e10-12W, nic-salt optimised version for the Nautilus AIO only; not compatible with other Nautilus tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.6Ω BVC: \u003c\/strong\u003e7-11W, the original Nautilus coil, suits high-PG and 50\/50 e-liquids, compatible with all Nautilus tanks including the original\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.0Ω Mesh: \u003c\/strong\u003e13-15W, newer mesh option for a slightly warmer MTL draw with improved flavour from the mesh construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.7Ω BVC:\u003c\/strong\u003e 18-23W, MTL draw at higher wattage, suits 50\/50 e-liquids; not recommended for the original Nautilus or Nautilus Mini due to airflow restrictions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.7Ω Mesh: \u003c\/strong\u003e20-25W, mesh version of the 0.7Ω option for improved flavour at MTL; same compatibility restrictions as 0.7Ω BVC\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eRDTL Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe lower-resistance RDTL coils suit vapers who prefer a more open draw and greater vapour production while keeping the inhale restricted compared to a full sub-ohm setup. These coils require a device capable of firing at higher wattages and perform best with 50\/50 or higher-VG e-liquids. They are not recommended for use in the original Nautilus or Nautilus Mini, as those tanks do not have sufficient airflow to fire them correctly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.4Ω BVC:\u003c\/strong\u003e 23-28W, RDTL draw, use with 50\/50 or higher-VG e-liquids; Nautilus 2 and above only\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.3Ω Mesh:\u003c\/strong\u003e 23-28W, most open draw in the range, mesh construction, use with higher-VG e-liquids; Nautilus 2 and above only\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDevice Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll Nautilus BVC and mesh coils fit the same coil seat, so the physical coil is the same size across all variants. However, not every coil suits every device due to differences in airflow and wattage output across the Nautilus tank generations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNautilus 2, Nautilus 2S, Nautilus 3, Nautilus GT, Nautilus GT Mini, Nautilus Nano: all coil variants compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOriginal Nautilus, Nautilus Mini: MTL coils only (1.6Ω, 1.8Ω, 1.0Ω mesh); the 0.4Ω and 0.7Ω variants are not recommended due to airflow restrictions in these older tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNautilus AIO: 1.8Ω BVC and 1.8Ω NS AIO only; other variants are not compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Zelos 3, Zelos M80: all coil variants compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire K3 tank: all coil variants compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Triton Mini: all coil variants compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Plato kit: compatible using the adaptor originally supplied with the kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid and Priming\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCoil resistance determines both draw style and the e-liquid types that work well. At 1.0Ω and above, nic salts, high-PG, and 50\/50 e-liquids are the right choice; high-VG shortfills are too thick for the wick to handle efficiently at these resistances. At 0.7Ω and below, 50\/50 and higher-VG blends are better suited, and higher-VG shortfills with a nic shot work well with the 0.3Ω and 0.4Ω coils. When fitting a new coil, prime it by dripping a few drops of e-liquid directly onto the exposed cotton at the top of the coil, fill the tank, and allow it to sit for 5-10 minutes before vaping. This saturates the wick and prevents a dry, burnt taste on the first few draws.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x Aspire Nautilus replacement coils in the chosen resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.3 Ohm (Mesh)","offer_id":40205144948810,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm 2S (Mesh)","offer_id":31805755097162,"sku":"6958947127165","price":9.99,"currency_code":"GBP","in_stock":false},{"title":"0.7 Ohm (Mesh)","offer_id":31805755129930,"sku":"11374","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.7 Ohm","offer_id":31805754998858,"sku":"658947121354","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.6 Ohm","offer_id":31805755031626,"sku":"849660010642","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.8 Ohm","offer_id":31805755064394,"sku":"849660010659","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm","offer_id":40787071664202,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/aspire-coils-aspire-nautilus-coils-pack-of-5-buy-aspire-nautilus-bvc-coils-pack-of-5-replacements-14256073736266.png?v=1641917255"},{"product_id":"aspirebvccoil","title":"Aspire BVC Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire BVC Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Aspire BVC replacement coils are the standard coil for the Aspire K1, K2, CE5, ET-S, and several other older Aspire clearomiser tanks. BVC stands for Bottom Vertical Coil, which refers to the vertical orientation of the heating element inside the coil body. They come in a pack of five and are available in 1.6Ω and 1.8Ω, both designed for MTL vaping with 50\/50 or high-PG e-liquids. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach coil has four wicking ports and organic cotton wicking, and screws into the base of the tank. If you own an Aspire K2 or K1, these are the replacement coils you need.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire BVC Coil Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFive coils per pack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo variants: 1.6Ω and 1.8Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBVC Bottom Vertical Coil design with four wicking ports\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOrganic cotton wicking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eScrew-fit installation into the base of the tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAll MTL style, suited to 50\/50 or high-PG e-liquids and nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with the K1, K1 Plus, K2, K Lite, CE5, CE5-S, ET, ET-S, ET-S Glass, Vivi Nova, Mini Nova, and Spryte\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e1.6Ω BVC Coil, 6-11W, MTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.6Ω coil is rated for 3-4.2V, which corresponds to roughly 6-11W on a variable wattage device. It produces a slightly warmer, slightly airier MTL draw compared to the 1.8Ω and is the coil most commonly pre-fitted in the K2 kit when purchased new. It is also a good choice if your device does not have variable wattage, as it performs well across most standard fixed-output batteries. Use 50\/50 or high-PG e-liquids and nic salts.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e1.8Ω BVC Coil, 8-13W, MTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.8Ω coil is rated for 3-5V, or roughly 8-13W, and gives a slightly tighter, cooler MTL draw than the 1.6Ω. Many long-term K2 and K1 users prefer the 1.8Ω for a draw that feels closer to a cigarette. It is also a sensible choice if you tend to use higher-strength nic salts, as the lower heat output complements a cooler inhale at higher nicotine levels. Use 50\/50 or high-PG e-liquids.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhat is BVC Technology?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBVC refers to the Bottom Vertical Coil construction used in this coil series. The heating wire runs vertically inside the coil body, surrounded by four wicking ports that draw e-liquid in from all sides. This layout was designed to reduce dry hits by improving e-liquid flow to the cotton, and to keep the coil fully submerged in e-liquid at the bottom of the tank. The BVC format was one of Aspire's earlier coil designs and has remained unchanged for many years, which is why the K1, K2, and CE5 tanks are still widely used today despite being older devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Aspire BVC coils are compatible with the following Aspire tanks and kits:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire K1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire K1 Plus\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire K2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire K Lite\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire CE5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire CE5-S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire ET\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire ET-S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire ET-S Glass\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Vivi Nova\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Mini Nova\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAspire Spryte\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese coils are NOT compatible with any Aspire Nautilus tank. The Nautilus, Nautilus Mini, Nautilus 2, and Nautilus 2S all use a separate coil format that looks similar but does not fit these tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x Aspire BVC replacement coils (1.6Ω or 1.8Ω, depending on variant ordered)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"1.6 Ohm","offer_id":31805831217226,"sku":"6958947110594","price":8.49,"currency_code":"GBP","in_stock":true},{"title":"1.8 Ohm","offer_id":31805831249994,"sku":"849660011113","price":8.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/aspire-coils-aspire-bvc-coils-pack-of-5-buy-aspire-bvc-coils-pack-of-5-vapeology-14328419680330.png?v=1641925534"},{"product_id":"smokrpmcoil","title":"SMOK RPM Replacement Coils 5 Pack","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSMOK RPM Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe SMOK RPM Replacement Coils are the original RPM coil series, compatible with a wide range of SMOK RPM and Nord pod devices including the RPM40, RPM80, Fetch Pro, Nord 2, and Nord 4. There are six variants available, covering everything from tight mouth-to-lung draws at low wattage through to direct-to-lung vaping at up to 25W. Each pack contains five coils. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe coils use a press-fit plug-and-play system: they push directly into the base of an RPM pod and lock in place without any threading. If you are searching for SMOK RPM coils or Fetch Pro coils, this is the correct page. If you are looking for SMOK RPM 5 coils, those are a different product entirely and require RPM 3 series coils, not these.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSMOK RPM Replacement Coils 5 Pack Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSix coil variants covering MTL through to DTL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage range: 10W to 25W across the series\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with RPM40, RPM80, Fetch Pro, Nord 2, Nord 4, and more\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit plug-and-play installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSuits nic salts, 50\/50, and high VG e-liquids depending on variant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.4ohm RPM Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.4ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: rated 25W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: DTL (direct-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: single Kanthal mesh with honeycomb configuration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: high VG, 60% VG minimum; 70%+ recommended. Not suitable for nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: cloud production and strong flavour at higher wattage; the most popular variant in the RPM range\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.6ohm RPM Triple Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.6ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: rated 25W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: restricted DTL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: triple Ni-Cr parallel coil configuration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: high VG, 60%+; suitable for lower nic strengths (3mg or 6mg freebase). Not ideal for nic salts at this wattage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: fast ramp-up time, strong vapour production, and vapers who want the triple coil output at a mid-range resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.3ohm RPM MTL Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.3ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: 10 to 15W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: MTL (mouth-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: single mesh coil optimised for low-wattage mouth-to-lung draw\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: works with 50\/50 and high VG at these lower wattages; also suitable for nic salts (10mg or 20mg)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: vapers who prefer an MTL draw but want mesh flavour quality; also useful for those on nic salts who need a tighter draw at low power\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.8ohm RPM DC MTL Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.8ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: rated 16W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: MTL (mouth-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: dual-coil MTL configuration (DC MTL)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: 50\/50 or higher PG; works well with nic salts (10mg or 20mg)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: MTL vapers who want a dual-coil setup with a slightly warmer vape than the 0.3 mesh and good nic salt compatibility\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e1.0ohm RPM SC Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 1.0ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: rated 14W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: MTL (mouth-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: single Ni-Cr coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: 50\/50 or higher PG; excellent with nic salts (10mg or 20mg)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: intense flavour from nic salts; the tightest draw in the RPM range and the best option if you are searching for the best RPM coil for salt nic\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e1.2ohm RPM Quartz Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 1.2ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: rated 12W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: MTL (mouth-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: single quartz core\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: 50\/50 or higher PG; works with nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: vapers who want a very clean, pure flavour; the quartz core does not impart any heat signature on the taste, so it suits those sensitive to coil flavour\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDevice Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese are original SMOK RPM series coils, designed for use with RPM pods across a wide range of SMOK kit and pod systems. They are not compatible with RPM 2 pods, Nord pods, or LP2 pods, which use different coil platforms. If you are searching for SMOK Fetch Pro coils or Nord 4 coils and your device uses the RPM pod, these are the correct coils. Note that some devices (such as the Nord 4) accept both RPM and Nord coils via different pod versions; check which pod type you are using before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK RPM40 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK RPM80 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK RPM80 Pro Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK RPM Lite Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Fetch Mini Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Fetch Pro Kit (RPM pod only; Fetch Pro Nord pod uses RGC coils)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord 2 Kit (RPM pod version)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord 4 Kit (RPM pod version)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord X Kit (RPM pod version)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord 50W Kit (RPM pod version)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Scar-P3 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Scar-P5 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Alike Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Morph Pod-40 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK IPX80 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Pozz X Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Thallo \/ Thallo S Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot compatible with: RPM 2 pods, RPM 4 pods, RPM 5 (uses RPM 3 coils), Nord pods, or LP2 pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x SMOK RPM Replacement Coils (in your chosen variant)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smok","offers":[{"title":"0.3Ω MTL Mesh 10w-15w","offer_id":40144454025290,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":false},{"title":"0.4 ohm","offer_id":31805836197962,"sku":"6940695634279","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 ohm","offer_id":31805836230730,"sku":"6940695634309","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/smok-coils-smok-rpm-coils-pack-of-5-buy-smok-rpm-coils-pack-of-5-vapeology-14256213721162.png?v=1641903389"},{"product_id":"geekvapeboostcoil","title":"GeekVape B Series Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekVape Aegis Boost Replacement Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GeekVape B Series coils are the replacement coils for the Aegis Boost range and a wide selection of other GeekVape pod kits and tanks. They were previously sold under the name Aegis Boost coils and the coil platform is the same: if you have been buying Aegis Boost coils, B Series is what you need. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSix resistances cover everything from tight MTL at 1.2Ω through to full DTL at 0.2Ω, with options in between for RDL and restricted DTL. All use KA1 mesh construction and push straight in with no threading. Packs contain five coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekVape B Series Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 5 coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSix resistances: 0.2Ω, 0.3Ω, 0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eKA1 mesh construction throughout\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation, no threading required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBoost Version (0.2Ω–0.6Ω): doubled lifespan versus original B coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCovers MTL, RDL, and DTL vaping styles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with nic salts, 50\/50, and high-VG e-liquids depending on resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFits a wide range of GeekVape Aegis and Z Nano devices\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePack of 5 Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pack contains five coils of the same resistance. Buying a spare pack means you always have a coil ready when the current one needs replacing, which avoids being stuck with a burnt coil waiting for a delivery. The pack of five format is standard across the B Series range regardless of which resistance you choose.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSix Resistances: 0.2Ω to 1.2Ω\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe full B Series range covers six resistance options, from the 0.2Ω DTL coil down to the 1.2Ω MTL coil for nic salts. The choice of resistance determines your vaping style, your recommended wattage, and which e-liquid type works best.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.2Ω\u003c\/strong\u003e runs at 50-58W for a full open-lung DTL vape. Best used with high-VG freebase e-liquid and the airflow fully open.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.3Ω\u003c\/strong\u003e runs at 30-38W for a restricted DTL vape at a slightly lower wattage. High-VG freebase e-liquid works best with the airflow two-thirds open or more.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.4Ω\u003c\/strong\u003e runs at 25-35W and suits an RDL draw with a balance of vapour and flavour. Compatible with high-VG or 50\/50 freebase.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6Ω \u003c\/strong\u003eruns at 15-25W and gives a tighter draw sitting between RDL and MTL. Works well with 50\/50 freebase or nic salts up to 20mg.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.8Ω \u003c\/strong\u003eruns at 12-16W for a standard mouth-to-lung vape. Suited to 50\/50 freebase or nic salts. Classic version construction.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.2Ω\u003c\/strong\u003e runs at 8-12W and gives the tightest draw in the range. Designed for nic salts on lower-wattage devices. Classic version construction.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eKA1 Mesh Construction\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll B Series coils use KA1 Kanthal mesh rather than traditional wire coil construction. Mesh distributes heat more evenly across a larger surface area, which produces more consistent vapour and richer flavour from draw to draw. It also tends to extend coil life compared to wire coils used at similar wattages. The mesh design heats and cools quickly, which means less residual heat between draws.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eB Series coils push straight into the pod base with no threading or twisting. Pull the base off the pod, press the coil in until it clicks into place, and reattach the base. The process takes a few seconds. Prime every new coil before the first use: add a few drops of e-liquid to the exposed cotton ports, fill the pod, and leave it to soak for three to five minutes before vaping. This prevents dry hits and burning on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBoost Version: Doubled Lifespan\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.2Ω, 0.3Ω, 0.4Ω, and 0.6Ω coils are supplied in the Boost Version, which GeekVape redesigned with improved materials and heat-load engineering. GeekVape rates the Boost Version coils at roughly double the lifespan of the original B coils, approximately 40ml of e-liquid per coil versus 20ml previously. The 0.8Ω and 1.2Ω MTL coils use classic version construction and do not have a Boost Version equivalent. Signs that any coil needs replacing are a burnt or muted taste, darker-than-normal e-liquid in the pod, or reduced vapour at your usual wattage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMTL, RDL, and DTL Vaping Styles\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe B Series range is one of the few coil platforms that covers the full spectrum from mouth-to-lung to direct-to-lung in a single product line. MTL coils (0.8Ω and 1.2Ω) suit vapers who prefer a tighter, cigarette-like draw and typically use nic salts or 50\/50 e-liquids. RDL coils (0.4Ω and 0.6Ω) sit in the middle: more airflow and vapour than MTL, but still a somewhat restricted inhale. DTL coils (0.2Ω and 0.3Ω) are for open-lung vaping with high-VG shortfills at higher wattages. Choosing the wrong resistance for your preferred style is one of the most common causes of an unsatisfying vape, so the resistance choice matters.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Compatibility by Resistance\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e0.2Ω and 0.3Ω:\u003c\/strong\u003e\u003cspan\u003e High-VG freebase only (70VG\/30PG or higher). Not suitable for nic salts.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e0.4Ω:\u003c\/strong\u003e\u003cspan\u003e High-VG freebase or 50\/50 freebase. Nic salts not recommended.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e0.6Ω:\u003c\/strong\u003e\u003cspan\u003e 50\/50 freebase or nic salts up to 30mg.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e0.8Ω and 1.2Ω:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e50\/50 freebase or nic salts. Not suited to high-VG shortfills.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUsing thick high-VG liquid in an MTL coil can cause wicking problems. Using nic salts in a DTL coil at high wattage will deliver far too strong a hit. Matching the e-liquid to the coil resistance matters as much as the wattage setting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible GeekVape Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eB Series coils fit a wide range of GeekVape pod kits and tanks. Check the list below against your device before ordering. Note that the Aegis Boost Pro uses P Series coils, and the T200 and L200 (Aegis Legend 2) use Z Series coils. B Series coils will not fit either of those platforms.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAegis Boost (all versions including Boost 2 \/ B60, Boost 3, Boost Plus)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAegis Hero, Aegis Hero 2 (H45), Aegis Hero 3 (H4 Classic), Aegis Hero 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAegis Mini 2 (M100)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Z Nano, Z Nano 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Z50\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eObelisk 65 \/ 65 FC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape MERO AIO\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAegis Force Pod\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot compatible with: Aegis Boost Pro (P Series), T200 (Z Series), L200 \/ Aegis Legend 2 (Z Series).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x GeekVape B Series coils (all one resistance per pack)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Geekvape","offers":[{"title":"B 0.2 Ohm","offer_id":40340642201674,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"B 0.4 Ohm Mesh","offer_id":31805845864522,"sku":"6970313645578","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"B 0.6 Ohm Mesh","offer_id":32419173531722,"sku":"11938","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/geekvape-coils-geekvape-boost-coils-pack-of-5-geekvape-boost-coils-pack-of-5-vapeology-14256226205770.png?v=1641917612"},{"product_id":"voopoouforcecoil","title":"VOOPOO UForce Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO UForce Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO UForce replacement coils are sold in packs of five and cover a wide wattage range across three coil series: the U series (parallel wire coils), the N series (mesh coils) and the D series (quad wire coils). Nine variants are available in total, spanning 0.13 Ohm to 0.6 Ohm and 24W to 130W. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll variants use organic cotton wicking, a gold-plated connection and a vertical coil structure designed to maximise flavour and wicking consistency. UForce coils are compatible with the UForce T1, UForce T2, DRAG 2, DRAG Mini, MOJO, TOO, Caliber and VMATE.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO UForce Replacement Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 5 coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNine variants across three series: U, N and D\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eU series: parallel wire coils, 0.15 to 0.4 Ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eN series: mesh coils, 0.13 to 0.3 Ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eD series: quad wire coils, 0.4 Ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOrganic cotton wicking on all variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGold-plated connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVertical coil structure for consistent wicking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAll variants sub-ohm DTL: no MTL option in the UForce range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with UForce T1, T2, DRAG 2, DRAG Mini, MOJO and more\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eU Series: U2, U4, U6, U8\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe U series uses parallel wire coils in a vertical orientation and is designed for high-wattage DTL vaping. Wicking is organic cotton throughout. The four U series variants cover a broad wattage range from 40W up to 130W, making them the most power-flexible coils in the UForce lineup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eU2:\u003c\/strong\u003e\u003cspan\u003e 0.4 Ohm, 40 to 80W. Dual parallel coil. The lowest-wattage entry point in the U series and a good choice for vapers using devices that top out in the 40 to 80W range. Best results between 55 and 65W.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eU4:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e0.23 Ohm, 50 to 120W. Quad parallel coil. Steps up vapour volume considerably over the U2. Works best between 60 and 80W and suits high-powered devices well.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eU6:\u003c\/strong\u003e\u003cspan\u003e 0.15 Ohm, 65 to 110W. Sextuple parallel coil. A high-power option with dense vapour output. Best between 80 and 90W.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eU8:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e0.15 Ohm, 70 to 130W. Octuple parallel coil. The highest-power U series option, requiring devices capable of 70W or more. Best between 90 and 110W.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eN Series: N1, N2, N3\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe N series uses mesh heating elements rather than parallel wire construction, which produces more consistent flavour across the life of the coil and faster heat-up times at comparable wattages. All three N series coils are designed for DTL vaping with high-VG shortfills or freebase nicotine at no more than 10mg.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eN1:\u003c\/strong\u003e\u003cspan\u003e 0.13 Ohm, 50 to 100W. Single mesh coil. The lowest resistance in the entire UForce range. Well-suited to vapers who prioritise flavour clarity and cloud production at mid to high wattages. Best between 70 and 80W.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eN2:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e0.3 Ohm, 45 to 80W. Dual mesh coil. A more accessible mesh option for vapers using mid-powered devices. Best between 55 and 65W.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eN3:\u003c\/strong\u003e\u003cspan\u003e 0.2 Ohm, 65 to 100W. Triple mesh coil. Sits between the N1 and N2 in terms of power requirement and vapour output. Best between 75 and 85W and a popular choice for flavour-focused DTL vapers on devices in the 65 to 100W range.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eD Series: D4\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe D4 is the sole D series variant, running at 0.4 Ohm with a recommended wattage of 50 to 90W. It uses a quad wire construction in a parallel arrangement rather than mesh and is best suited to vapers who prefer the characteristics of a wire coil over a mesh coil at mid to high wattages. Best results come between 65 and 75W.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eP Series: P2\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe P2 is the only lower-wattage option in the UForce range, running at 0.6 Ohm with a recommended wattage of just 24 to 28W. It uses a single mesh construction and is designed for vapers who want a mesh coil experience at significantly lower power than the N series. It is still a sub-ohm DTL coil and is not suited to nicotine salts at higher strengths.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eN Series vs U Series: What Is the Difference?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe main difference between the N series and the U series is the heating element. U series coils use parallel wire construction, while N series coils use mesh. Mesh covers a larger surface area and heats more evenly, which generally produces more consistent flavour and a slightly faster heat-up time at the same wattage. The U series coils tend to suit vapers who prioritise raw vapour volume at very high wattages, while the N series suits vapers who prioritise flavour. The N3 and U4 are the most directly comparable variants: both sit in the mid-range of the lineup, but the N3's triple mesh construction typically delivers richer flavour than the U4's quad wire design at equivalent wattages.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eOrganic Cotton and Vertical Coil Structure\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery UForce coil uses Japanese organic cotton as the wicking material, which absorbs e-liquid cleanly without contributing off-flavours over the life of the coil. The vertical coil orientation ensures e-liquid feeds consistently into the wicking ports from all sides, reducing the risk of dry hits during extended use. Gold-plated connections on every variant ensure a clean, low-resistance contact with the tank base.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices and Tanks\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO UForce coils are compatible with the following devices and tanks:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO UForce T1 tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO UForce T2 tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO UForce tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO DRAG 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO DRAG Mini\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO MOJO\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO TOO and TOO Resin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Caliber\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO VMATE\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAny other VOOPOO device specifying UForce coil compatibility\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Pack\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x VOOPOO UForce coils (one variant per pack)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voopoo","offers":[{"title":"N2 0.3 Ohm","offer_id":31805846192202,"sku":"6970810461015","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/voopoo-coils-voopoo-uforce-coils-pack-of-5-voopoo-uforce-coils-pack-of-5-n3-n2-d4-u2-mesh-14256226435146.png?v=1641926970"},{"product_id":"smoknordcoils","title":"SMOK Nord Replacement Coils 5 Pack","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSMOK Nord Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe SMOK Nord coil range covers the original Nord pod family: the Nord, Nord 2, Nord C, Nord AIO, Fetch Mini, Stick N18, Alike, and RPM40, among others. There are six variants in the standard series, running from a 0.6ohm mesh for DTL vaping down to 1.4ohm ceramic for tight MTL draws with nic salts. One thing worth clarifying: the Nord 5 does not use Nord coils. It runs on RPM 3 series coils, which are a separate product.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSMOK Nord Replacement Coils 5 Pack Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSix standard variants covering DTL through to MTL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation into the Nord pod\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Nord, Nord 2, Nord C, Fetch Mini, RPM40 and more\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSuits high VG, 50\/50, and nic salt e-liquids depending on variant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.6ohm Nord Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.6ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: 25W max\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: DTL (direct-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: single mesh coil with large mesh surface for sub-ohm vapour production\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: high VG, 60%+ minimum; 70%+ recommended. Not suitable for nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: strong vapour output and cloud production in a pod device; the most popular Nord variant for DTL vapers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.6ohm Nord DC Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.6ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: 20W recommended\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: DTL (direct-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: dual-coil configuration for higher flavour density\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: high VG, 60%+\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: vapers who want DTL output at a slightly lower wattage than the mesh variant; the dual-coil build gives a warmer, denser draw\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.8ohm Nord Mesh-MTL Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.8ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: 16W max\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: MTL (mouth-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: mesh coil for MTL use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: 50\/50 or higher VG; works with nic salts at this wattage. Good with 10mg or 20mg\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: MTL vapers who want the flavour quality of a mesh coil without moving to DTL; a good middle ground between the tighter 1.4ohm options and the more open 0.6ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.8ohm Nord DC MTL Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.8ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: 16W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: MTL (mouth-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: dual-coil MTL configuration\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: 50\/50 or higher PG; works well with nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: MTL vapers who prefer a dual-coil build over mesh; similar draw to the 0.8 Mesh-MTL but with a slightly different flavour character\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e1.4ohm Nord Regular Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 1.4ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: low wattage MTL, typically 10-12W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: MTL (mouth-to-lung), tight draw\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: single Kanthal coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: 50\/50 or higher PG; ideal for nic salts (10mg or 20mg). Works well with 50nic and above\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: vapers coming from cigarettes or who want the most cigarette-like draw in the Nord range; pairs well with higher-strength nic salts for a strong but smooth hit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e1.4ohm Nord Ceramic Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 1.4ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage: low wattage MTL, typically 10-12W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: MTL (mouth-to-lung), tight draw\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: ceramic core with high-temperature resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: 50\/50 or higher PG; nic salts. Same e-liquid recommendation as the 1.4 Regular\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: heavier MTL vapers who go through coils quickly; the ceramic core handles heat more consistently than Kanthal under sustained use and tends to last longer\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich Nord Coil Should I Choose\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you're unsure which variant to go for, here's a quick guide. For DTL vaping with high VG liquid, the 0.6ohm Mesh is the go-to. If you vape 50\/50 and want MTL with a bit more vapour than usual, the 0.8ohm Mesh-MTL is worth trying. If you're on nic salts and want a tight, cigarette-like draw, the 1.4ohm Regular or Ceramic will suit you best. The Ceramic version is a better long-term pick for heavier vapers. This is the question behind the \"smok nord coils difference\" searches, and hopefully this answers it clearly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDevice Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese are standard Nord series coils. They fit any device that uses a Nord pod. They do not fit Nord Pro pods, RPM pods, or LP2 pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord 2 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord C Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord AIO 19 and 22 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord 50W Kit (Nord pod version only)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord X Kit (Nord pod version only)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Vape Pen Nord 19 and 22 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Fetch Mini Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK RPM40 Kit (Nord pod version)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Alike Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Stick N18 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Priv N19 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Trinity Alpha Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot compatible with: Nord Pro pods, RPM pods, RPM 2 pods, Nord 5 (uses RPM 3 coils), or LP2 pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x SMOK Nord Replacement Coils (in your chosen variant)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smok","offers":[{"title":"0.6 Mesh","offer_id":31805871390794,"sku":"6940695619603","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"1.4 Regular","offer_id":31805871423562,"sku":"6940695619610","price":12.99,"currency_code":"GBP","in_stock":false},{"title":"0.8 Mesh","offer_id":31805871456330,"sku":"6940695624096","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/smok-coils-smok-nord-coils-pack-of-5-14256275619914.png?v=1641927687"},{"product_id":"geekvapezeussubohmtankcoilspackof5","title":"GeekVape Z Series Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekVape Z Series Replacement Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GeekVape Z Series coils are sub-ohm DTL replacement coils sold in packs of five, designed for GeekVape's range of Zeus sub-ohm tanks, the Z Fli tanks, and a number of Aegis Legend kits. Previously known as Zeus coils, the Z Series covers a wide range of resistances and three tiers of coil technology: the standard KA1 Kanthal mesh, the XM version for improved density and coil life, and the XM Boost version for around double the lifespan of the original. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll versions use a press-fit installation from the base of the tank, with no threading required. Every coil in the range is designed for direct-to-lung vaping at higher wattages and works best with high-VG shortfill e-liquid, ideally 70% VG or above.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eZ Series Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 5 replacement coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eKA1 Kanthal mesh construction throughout the range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAvailable in standard, XM, and XM Boost versions\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eZ0.25Ω dual mesh coil, 45-57W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eZ0.4Ω (Z1) single mesh coil, 50-60W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eZ0.2Ω (Z2) single mesh coil, 70-80W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eZ0.15Ω single mesh coil, 80-90W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation, no threading required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eXM Boost versions last approximately 50-60ml per coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Zeus sub-ohm tanks, Z Fli tanks, and Aegis Legend kits\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/geekvape-z-series-coils-spec-1.webp?v=1773050214\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eZ0.25Ω Dual Mesh Coil (45-57W)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Z0.25Ω is a dual mesh coil, meaning it uses two mesh heating elements rather than one. This gives it a large surface area and a warm, dense vapour with strong flavour reproduction. Running at 45-57W, it sits between the Z0.4Ω and Z0.2Ω in terms of power draw, and suits vapers who want a substantial DTL vape without pushing into the highest wattage ranges. The dual coil construction also means flavour tends to be particularly rich compared to the single mesh options. It is one of the most searched Z Series variants and a good starting point if you are unsure which resistance to choose.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eZ0.4Ω Single Mesh Coil (50-60W), Also Known as Z1\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Z0.4Ω coil is the entry-level option in the Z Series range and the most widely available. It was previously referred to as the Z1 coil on older packaging. At 50-60W, it produces a solid DTL vape with good vapour output and a manageable power draw, making it easier on battery life compared to the lower-resistance options. It is a good choice for vapers new to sub-ohm tanks or those who prefer not to run at the highest wattage settings. An XM version and an XM Boost version of the 0.4Ω are also available, both rated at the same 50-60W but with improved mesh construction and longer coil life.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eZ0.2Ω Single Mesh Coil (70-80W), Also Known as Z2\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Z0.2Ω coil, previously referred to as the Z2, runs at 70-80W and delivers a warmer, denser vape with notably more vapour production than the Z0.4Ω. It is one of the most popular choices for vapers who use high-VG shortfills and want a powerful, cloud-producing setup. An XM Boost version of the 0.2Ω is available with enhanced mesh and wicking, offering approximately 50-60ml of e-liquid per coil before it needs replacing. Running at these wattages means a high-capacity mod is recommended, ideally one rated at 100W or above such as the Aegis Legend or Z200 kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eZ0.15Ω Single Mesh Coil (80-90W)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Z0.15Ω is the highest-wattage option in the standard Z Series range and is designed for vapers who want maximum vapour output and cloud production. At 80-90W, it requires a powerful dual-battery or high-capacity single-cell mod to run at its best. The XM version of the 0.15Ω runs slightly lower at 70-85W and offers an improved mesh structure and better coil longevity compared to the standard version. An XM Boost version is also available, extending coil life further. All three 0.15Ω versions suit high-VG shortfills at low or zero nicotine only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eStandard, XM, and XM Boost: What Is the Difference\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe standard Z Series coils use KA1 Kanthal single or dual mesh and represent the original Z coil design. The XM versions have an improved mesh structure with a wider heating surface, producing denser vapour and a fuller flavour profile compared to the standard coils. The XM Boost version is the most recent iteration and claims approximately double the lifespan of the original standard coils, with GeekVape quoting around 50-60ml of e-liquid per coil. All three generations use the same press-fit fitting and are interchangeable across compatible tanks. If you currently use standard Z Series coils, you can switch to XM or XM Boost without any changes to your tank or setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll Z Series coils use a press-fit design, installing from the base of the tank by pushing the coil straight into the tank deck. There is no threading and no need to screw the coil in or out. Two metal alignment tabs on the coil locate into corresponding cut-outs on the base of the tank to ensure correct seating and good electrical contact. Coil changes are quick and clean compared to threaded designs. Before fitting a new coil, add two to three drops of e-liquid onto the cotton wicking ports on the side of the coil, install it, fill the tank, and wait three to five minutes before vaping to prime the cotton fully and avoid a dry first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/geekvape-z-series-coils-spec-2.webp?v=1773050235\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Tanks and Kits\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Z Series coils fit a wide range of GeekVape tanks and Aegis Legend kits. The following are confirmed compatible devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Zeus Sub-Ohm Tank (original)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Z Sub-Ohm Tank \/ Z Sub-Ohm Tank 2021 \/ Z Sub-Ohm SE Tank \/ Z Sub-Ohm Tank 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Z Fli Tank \/ Z Fli 2 Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Obelisk Tank \/ Obelisk 120 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape P Sub-Ohm Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Aegis Legend Kit (Zeus Edition)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Aegis Legend 2 (L200) Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Aegis Legend 3 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Aegis Legend 5 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape S100 (Aegis Solo 2)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Max100 (Aegis Max 2)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape T200 (Aegis Touch) Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Z200 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape AEGIS X Kit (Zeus Edition only)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNote: the Z0.25Ω dual mesh coil is not compatible with the P Sub-Ohm Tank. If you have a P Tank, use the Z0.4Ω, Z0.2Ω, or Z0.15Ω options instead. The Z Max Tank takes M Series coils, not Z Series. The Z Nano 2 Tank takes B Series coils, not Z Series.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Recommendations\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll Z Series coils are sub-ohm DTL coils and require high-VG e-liquid to perform correctly. A minimum of 70% VG is recommended, with 70\/30 or 80\/20 blends working best across the full range. Shortfill e-liquids with a nic shot added are the most popular choice. These coils are not suitable for use with 50\/50 e-liquids, as the thinner PG-heavy blend is too runny for the wicking system and can cause flooding, leaking, and spitting. Nic salts are also not recommended, particularly at the lower resistances that run above 60W. For best coil life, stay within the recommended wattage range for the variant you are using and prime each coil fully before the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x GeekVape Z Series replacement coils (variant as ordered)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Geekvape","offers":[{"title":"Z1 Mesh KA1 0.4 Ohm","offer_id":32343562289226,"sku":"11817","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"Z2 Mesh KA1 0.2 Ohm","offer_id":32358449676362,"sku":"11821","price":11.99,"currency_code":"GBP","in_stock":false},{"title":"Z0.25 dual coil","offer_id":40181357838410,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":false},{"title":"XM 0.15Ω","offer_id":40766909481034,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"XM 0.4Ω","offer_id":40766909513802,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"Z XM 0.2ohm","offer_id":56382757437826,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/geekvape-coils-geekvape-zeus-sub-ohm-tank-coils-pack-of-5-14906397982794.png?v=1641915273"},{"product_id":"smok-tfv9-coils-pack-of-5","title":"SMOK TFV9 Replacement Coils 5 Pack","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSMOK TFV9 Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe SMOK TFV9 Replacement Coils are the V9 Mesh coils for the TFV9 sub-ohm tank and a wide range of compatible SMOK kits including the Rigel and Scar series. There is one variant: the 0.15ohm V9 Mesh, rated 40-90W with a recommended range of 70-80W. Each pack contains five coils. These are sub-ohm coils for DTL (direct-to-lung) vaping only, and require a device capable of delivering adequate power. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you have searched for SMOK V9 coils, SMOK TFV9 coils, or TFV9 coils, this is the correct product. One note on compatibility: if you have a SMOK Stick V9, that device uses the TFV8 Baby coil platform rather than the TFV9 coil, so these are not the right coils for the Stick V9.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSMOK TFV9 Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e0.15ohm V9 Mesh coil, rated 40-90W, recommended 70-80W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHoneycomb Kanthal mesh configuration with organic cotton wicking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGold-plated contact pin for reliable conductivity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStainless steel construction for extended lifespan\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThreaded installation into the tank base\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSub-ohm coils for DTL vaping only\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRecommended with high VG e-liquid, 60% VG minimum, 70%+ for best results\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.15ohm V9 Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.15ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage range: 40-90W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRecommended wattage: 70-80W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: DTL (direct-to-lung) only\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWire material: Kanthal mesh\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWicking material: organic cotton\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: high VG, 60% VG minimum; 70%+ recommended for best flavour and to protect the cotton\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNot suitable for nicotine salts or high-strength nicotine; stick to 3mg or 6mg freebase e-liquid\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMesh Design and Performance\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe V9 Mesh coil uses a honeycomb mesh strip rather than a traditional round wire coil. The mesh format gives a larger surface area in contact with the cotton and e-liquid, which means faster and more even heating across the full width of the coil. In practice this produces better flavour consistency from the first draw compared to older wire-based coils, and denser vapour at equivalent wattages. The Kanthal mesh heats quickly and cools quickly between draws, which helps prevent the cotton from overheating during back-to-back puffs at higher wattages.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eInstallation and Priming\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTFV9 coils install by threading into the base of the tank. Remove the old coil by unscrewing it anti-clockwise from the bottom, then thread the new coil in clockwise until it seats firmly. Before filling and firing, prime the coil: drip two or three drops of e-liquid directly onto the visible cotton inside the coil head, then fill the tank and leave it to stand for five minutes before your first draw. Starting at a lower wattage (around 40-50W) and working upward over the first few puffs will help the cotton fully saturate and prevent dry hits. Skipping the priming step is the most common cause of a burnt taste from a new coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDevice Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TFV9 coil platform covers a broad range of SMOK hardware, including kits that shipped with the TFV9 tank and kits from the older TFV8 Baby family. If you have searched for SMOK Rigel coils, these are the correct product: the Rigel and Rigel Mini both use the TFV9 tank and run on this coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK TFV9 Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK TFV9 Mini Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Rigel Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Rigel Mini Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Scar-18 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Scar-Mini Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK TFV8 Baby Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK TFV8 Big Baby Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK TFV12 Baby Prince Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK MAG Baby Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK G-Priv Baby Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK H-Priv 2 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNote: the SMOK Stick V9 is NOT compatible with these coils. The Stick V9 uses the TFV8 Baby coil, which is a different product.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x SMOK TFV9 0.15ohm V9 Mesh Coils\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smok","offers":[{"title":"Default Title","offer_id":32581986484298,"sku":null,"price":14.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/smok-coils-smok-tfv9-coils-pack-of-5-smok-tfv9-coils-pack-of-5-vapeology-15336167931978.jpg?v=1641910402"},{"product_id":"aspire-favostix-replacement-pods-3pack","title":"Aspire Favostix Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Favostix Spare Pods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Aspire Favostix replacement pods are the spare pods for the Aspire Favostix pod kit and the Favostix 2. Each pod has a built-in mesh coil that cannot be removed separately, so when the coil is spent the whole pod is swapped out. This is also why you may see them referred to as Favostix replacement coils or Favostix spare coils: the pod and the coil are one unit. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThey come in a pack of three and are available in 0.6Ω for a slightly airier restricted draw and 1.0Ω for a tighter mouth-to-lung vape. Both use Aspire's Kanthal AF mesh coil build with a combined linen and organic cotton wick.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Favostix Replacement Pods Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of three replacement pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml capacity (UK TPD)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo variants: 0.6Ω and 1.0Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in Kanthal AF mesh coil, non-replaceable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCombined linen and organic cotton wicking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBottom-fill with silicone stopper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic connection to device\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with the Favostix and Favostix 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePCTG material, translucent pod body\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.6Ω Pod, 15-18W, Restricted Direct-to-Lung\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.6Ω pod delivers a slightly airier draw than the 1.0Ω and is the more popular choice for vapers who want a little more vapour with their flavour. It works best at 15-18W and suits 50\/50 e-liquids up to around 70-80% VG. Nic salts work well at this resistance too, particularly mid-strength salts in the 10-20mg range. If you tend to vape with the airflow slightly open or prefer a draw that sits between tight MTL and full direct-to-lung, the 0.6Ω is the better fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e1.0Ω Pod, 12-15W, Mouth-to-Lung\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.0Ω pod gives a tighter, cooler draw that is very close to the pull of a cigarette. It runs at 12-15W and is the right choice for vapers who prefer a genuine MTL style or who use high-strength nic salts. High-PG and 50\/50 e-liquids are the best match, as thicker VG-heavy blends can be slow to wick at this resistance and may cause dry hits. If you are new to vaping and coming from cigarettes, the 1.0Ω pod is usually the most comfortable starting point.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt-in Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth pods use a Kanthal AF mesh coil, which is the same coil type used across other Aspire Flexus AF series devices. Mesh construction means the heating surface is spread across a flat grid rather than concentrated in a single wire, which gives a more even heat distribution and generally better flavour from the first draw. The wick is a combination of linen and organic cotton, which Aspire uses for its heat resistance and consistent wicking performance across multiple refills. The coil cannot be separated from the pod body, so the full pod is replaced when the coil wears out.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2ml Capacity and Bottom-Fill Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pods hold 2ml of e-liquid, which is the standard UK TPD limit for refillable pods. Filling is done through a port on the base of the pod, sealed with a silicone stopper that sits in a slot and pulls out cleanly without tools. The pod body is PCTG, which is a translucent plastic that lets you keep an eye on how much e-liquid is left without having to remove the pod. Refilling is straightforward: pull the stopper, fill to just below the top of the port, replace the stopper, and leave the pod to prime for a couple of minutes before vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMagnetic Connection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pods attach to the Favostix device via a magnetic connection rather than a push-fit clip. This means the pod seats and releases easily with a straight lift, without having to squeeze tabs or use a tool. It also means the pod is held securely enough that it will not fall out during normal use. When inserting a new pod, a short prime time of two to three minutes after filling is recommended before drawing, to allow the cotton to fully saturate.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Favostix replacement pods are compatible with both the original Aspire Favostix kit and the Aspire Favostix 2. The Favostix 2 also supports a 0.8Ω pod that was introduced alongside that kit, which is a mid-point between the two resistances available here. If you have a Favostix 2 and want to try the 0.8Ω option, check whether we stock that variant separately. The 0.6Ω and 1.0Ω pods on this page will work correctly in the Favostix 2 as well as the original device.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich Pod Should I Choose?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you are replacing the pod that came with your Favostix kit, the coil resistance will be marked on the side of the old pod. Most Favostix kits ship with a 0.6Ω pod pre-fitted, with a 1.0Ω pod included as a spare. If your current pod feels dry, harsh, or has a burnt taste, that is a sign it is due for replacement, and priming the new pod before use will get you off to a clean start. If you have been finding your draw too loose, try the 1.0Ω next. If it feels too tight or you want more vapour, the 0.6Ω will suit you better.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3 x Aspire Favostix replacement pods (0.6Ω or 1.0Ω, depending on variant selected)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.6Ω","offer_id":32668245131338,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"1.0Ω","offer_id":32668245164106,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/aspire-coils-0-6-aspire-favostix-replacement-pods-pack-of-3-28449461370954.jpg?v=1641978828"},{"product_id":"voopoo-tpp-coils-pack-of-3","title":"VOOPOO TPP Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO TPP Coils for Drag 3 and Drag X Plus\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO TPP replacement coils are sold in packs of three and cover the full DTL and RDL wattage range used across the TPP platform. Four variants are available: the DM1, DM2, DM3 and DM4, spanning 0.15 Ohm to 0.3 Ohm and 32W to 100W. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll four use a mesh heating element and press-fit installation, and all are designed for high-VG shortfills or freebase nicotine at no more than 10mg. TPP coils fit the TPP Pod Tank used across the VOOPOO Drag 3, Drag X Plus, Drag X Pro, Drag S Pro, Argus GT 2 and Argus MT.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO TPP Replacement Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 3 coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFour variants: TPP-DM1, TPP-DM2, TPP-DM3, TPP-DM4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistances: 0.15 Ohm (DM1 and DM3) and 0.2 Ohm (DM2) and 0.3 Ohm (DM4)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage range: 32W to 100W across the range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAll variants DTL or RDL: no MTL option in the TPP range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMesh heating element on all variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation, no tools needed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHigh-VG or 60\/40 e-liquids, freebase nicotine at up to 10mg\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with all VOOPOO TPP platform devices\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-tpp-coils-spec-1.webp?v=1772799648\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTPP-DM1: 0.15 Ohm, 60 to 80W\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TPP-DM1 is the mid-range high-power option in the TPP lineup, running at 0.15 Ohm with a recommended wattage of 60 to 80W. It delivers a fully open DTL draw with strong vapour production and works best with high-VG shortfills. This is the most popular all-round TPP coil and a good starting point for vapers on devices such as the Drag 3 or Drag X Plus running in the 60 to 80W range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTPP-DM2: 0.2 Ohm, 40 to 60W\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TPP-DM2 runs at 0.2 Ohm with a recommended wattage of 40 to 60W, making it the lowest-power DTL option in the range. It suits vapers whose devices top out in the 40 to 60W range or those who prefer a slightly cooler, less intense DTL draw. High-VG or 60\/40 e-liquids with freebase nicotine at up to 10mg work best in this coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTPP-DM3: 0.15 Ohm, 80 to 100W\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TPP-DM3 shares the same 0.15 Ohm resistance as the DM1 but is built for higher wattage, running at 80 to 100W. It is designed for vapers who want maximum vapour volume and cloud output and requires a device capable of at least 80W. The DM3 runs hotter and harder than the DM1 at the same resistance and is best paired with a high-VG shortfill on a high-powered device such as the Drag 3 at its upper wattage range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTPP-DM4: 0.3 Ohm, 32 to 40W\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe TPP-DM4 runs at 0.3 Ohm with a recommended wattage of 32 to 40W, producing a half-DTL or restricted DTL draw rather than a fully open lung inhale. It is the most accessible coil in the TPP range for vapers coming from lower-powered devices and suits those who find the DM2 too open or intense. High-VG or 70\/30 e-liquids work well at this resistance, and freebase nicotine at up to 10mg is recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMesh Heating Element\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll four TPP variants use a mesh heating element rather than a round-wire construction. Mesh covers a larger surface area, heats more evenly across its face and produces consistent flavour from the first draw through to the end of the coil's life. Heat-up time is faster than a round-wire equivalent at the same wattage, and the mesh construction is more resistant to dry hits during normal use. Sweetened e-liquids and dessert flavours containing sucralose will shorten coil life on any mesh coil, so pairing TPP coils with quality, low-sucralose e-liquids will extend how long each coil lasts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-tpp-coils-spec-2.webp?v=1772799678\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTPP coils press directly into the base of any TPP-compatible pod or tank without threading or tools. Removing a spent coil is done by pushing it out from the opposite end. Before first use, fit the coil, fill the pod or tank, and allow at least five minutes for the wick to saturate before vaping. Starting at the lower end of the coil's wattage range and increasing gradually helps avoid a dry hit on the first draw and extends the coil's working life.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO TPP coils fit any device that accepts the TPP Pod Tank or TPP Pod. Always check the coil's minimum wattage against your device's maximum output before ordering. Compatible devices include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Drag 3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Drag X Plus\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Drag X Pro\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Drag S Pro\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Argus GT 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Argus MT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAny other VOOPOO device specifying TPP coil compatibility\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Pack\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3 x VOOPOO TPP coils (one variant per pack)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voopoo","offers":[{"title":"TPP-DM1 0.15Ω","offer_id":32670446813258,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":true},{"title":"TPP-DM2 0.2Ω","offer_id":39257039503434,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":true},{"title":"TPP-DM3 0.15","offer_id":39397457199178,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":true},{"title":"TPP-DM4 0.3","offer_id":39397457789002,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/voopoo-coils-voopoo-tpp-coils-pack-of-3-15595373396042.jpg?v=1641938670"},{"product_id":"vaporesso-gtx-coils-pack-of-5","title":"Vaporesso GTX Coils (Pack Of 5)","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso GTX Replacement Coils (5 Pack)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/vaporesso\" title=\"Browse our vaporesso vape range \"\u003eVaporesso\u003c\/a\u003e GTX coils are a cross-compatible mesh coil range that fits over 20 Vaporesso kits and pods. Seven single mesh resistances run from 0.15Ω (60 to 75W) down to 1.2Ω (8 to 12W), covering DTL, RDL, and MTL vaping styles. Three dual mesh options are also available at the lower resistances for stronger flavour and denser vapour. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll GTX coils use a plug-and-play installation, flax cotton and non-woven fabric wicking for rapid saturation, and triple silicone O-rings for leak resistance. Sold in packs of five. For coils below 1.0Ω, use high VG e-liquids of 70% VG or above. For the 1.2Ω coil, \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/freebase-50-50-vape-juice\" title=\"Browse our 50VG\/50PG vape juice range \"\u003e50PG\/50VG  e-liquids\u003c\/a\u003e and \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/nic-salts\" title=\"Browse our nic salt e-liquid range \"\u003enicotine salts\u003c\/a\u003e work best.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003eGTX Coil Key Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSeven single mesh and three dual mesh resistances\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCovers DTL, RDL, and MTL vaping styles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePlug-and-play coil installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFlax cotton and non-woven fabric wicking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTriple silicone O-ring seal for leak resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFits 20+ Vaporesso kits and pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold in 5-packs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporessso-gtx-coils-spec-1.webp?v=1772704735\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eGTX Coil Wattage and Resistance Guide\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GTX range covers everything from high-powered cloud vaping to a tight cigarette-style draw. Lower resistance coils produce more vapour and need more power, while higher resistance coils run at lower wattages and deliver a tighter, cooler draw. The lower resistance coils (0.15Ω to 0.3Ω) use NiChrome (NiCr) mesh for fast ramp-up and warmer vapour. The mid-range and higher resistance coils (0.4Ω to 1.2Ω) use FeCrAl (Kanthal) mesh, which many vapers find produces a wetter, more flavour-forward hit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTX 0.15Ω Mesh Coil\u003c\/strong\u003e (60 to 75W, best at 70W)\u003c\/span\u003e\u003cspan\u003e – The highest-powered GTX coil, built for maximum cloud production with a wide-open DTL draw. Best paired with high VG shortfills. This coil also fits the Armour G and Armour GS pod kits.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTX 0.2Ω Mesh Coil \u003c\/strong\u003e(45 to 60W, best at 55W)\u003c\/span\u003e\u003cspan\u003e – A versatile DTL coil and the most popular in the range. Delivers strong vapour with good flavour at moderate wattages. Works well with 70\/30 or max VG e-liquids.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTX 0.3Ω Mesh Coil \u003c\/strong\u003e(32 to 45W, best at 40W)\u003c\/span\u003e\u003cspan\u003e – A lower-wattage DTL option that uses less battery and e-liquid than the 0.2Ω while still producing satisfying vapour. A good middle ground if you find the 0.2Ω too warm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTX 0.4Ω Mesh Coil\u003c\/strong\u003e (26 to 32W, best at 30W)\u003c\/span\u003e\u003cspan\u003e – Sits between DTL and MTL, providing a restricted direct lung draw. The FeCrAl mesh gives a wetter, more flavourful hit. Works with both high VG and 50\/50 e-liquids.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTX 0.6Ω Mesh Coil\u003c\/strong\u003e (20 to 30W, best at 28W)\u003c\/span\u003e\u003cspan\u003e – A restricted draw suited to RDL vaping. Runs cool and pairs well with 50\/50 e-liquids and nicotine salts at lower strengths. A popular choice for vapers who want decent vapour without high power.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTX 0.8Ω Mesh Coil \u003c\/strong\u003e(12 to 20W, best at 18W)\u003c\/span\u003e\u003cspan\u003e – A loose MTL coil with a slightly open draw. Good for nic salts at 10mg or 20mg, or 50\/50 freebase e-liquids. Offers more air than the 1.2Ω for vapers who find a tight draw too restrictive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTX 1.2Ω Mesh Coil \u003c\/strong\u003e(8 to 12W, best at 11W)\u003c\/span\u003e\u003cspan\u003e – The tightest draw in the GTX range, closest to a cigarette pull. Best with 50\/50 or higher PG e-liquids and nicotine salts at 10mg or 20mg. Low power means excellent battery life.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eGTX 0.15Ω Dual Mesh Coil\u003c\/strong\u003e\u003cspan\u003e – Two mesh elements instead of one for richer flavour and denser vapour at 60 to 75W. The dual mesh version of the 0.15Ω for vapers who want maximum intensity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eGTX 0.2Ω Dual Mesh Coil\u003c\/strong\u003e\u003cspan\u003e – Dual mesh at 45 to 60W. Noticeably stronger flavour than the single mesh 0.2Ω at the same wattage, with thicker vapour production.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eGTX 0.3Ω Dual Mesh Coil\u003c\/strong\u003e\u003cspan\u003e – Dual mesh at 32 to 45W. A good option for vapers who want the boosted flavour of dual mesh at a lower wattage and battery draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporessso-gtx-coils-spec-4.webp?v=1772704736\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFlax Cotton and Non-Woven Fabric Wicking\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGTX coils use a blend of flax cotton and non-woven fabric rather than standard cotton alone. The flax fibres absorb e-liquid faster and hold more of it against the mesh, which helps prevent dry hits and delivers a fuller, more consistent flavour from start to finish. This wicking material is a key reason GTX coils tend to last longer than many competing coil ranges. Vaporesso also uses antibacterial cotton in the wicking structure to keep the flavour clean over the life of the coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporessso-gtx-coils-spec-3.webp?v=1772704735\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTriple Silicone O-Ring Seal\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach GTX coil has three silicone O-rings around the base and top to create a tight seal when installed. This reduces the chance of e-liquid leaking between the coil and the pod or tank, which is a common issue with coil systems that use fewer seals. The triple O-ring design also makes the coil sit more securely in the device, reducing any wobble or loose fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePlug-and-Play Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGTX coils push into the base of the pod or tank without any screwing or threading. Pull the old coil out and push the new one in until it sits flush. Before your first vape on a new coil, fill the pod or tank and leave it for 5 to 10 minutes so the wicking material can fully absorb the e-liquid. Starting at the lower end of the recommended wattage range and working up gradually over the first few fills helps the coil bed in and last longer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGTX coils fit a wide range of Vaporesso kits and pods. The most popular compatible devices include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Armour G, Armour GS, and Armour Ultra\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Luxe X, Luxe X2, Luxe X Pro, Luxe XR Max, and Luxe XR Max 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Luxe 80, Luxe 80S, and Luxe PM40\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Swag PX80\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso GTX One, GTX GO 40, and GTX GO 80\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Gen PT60, Gen PT80 S, Gen Nano, and Gen Air 40\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Target 80, Target PM30, Target PM80, and Target PM80 SE\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot all GTX coils fit every device in the list above. The Luxe PM40 only takes 0.6Ω, 0.8Ω, and 1.2Ω coils. The 0.15Ω coil fits the Armour G and Armour GS but not all older GTX devices. Always check your kit's manual if you are unsure. GTX coils are a separate platform from GTi coils, which are used in the iTank and iTank 2 sub-ohm tanks, so the two types are not interchangeable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Recommendations\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe right e-liquid depends on which GTX coil you are using. For coils below 1.0Ω (0.15Ω to 0.8Ω), high VG e-liquids of 70% VG or above are recommended for the best wicking and vapour production. Freebase nicotine at 3mg to 6mg suits these sub-ohm coils well. For the 0.8Ω coil, 50\/50 e-liquids and nic salts at 10mg or 20mg also work nicely given its lower wattage. For the 1.2Ω MTL coil, 50\/50 VG\/PG or higher PG e-liquids are the best match, and nicotine salts at 10mg or 20mg are ideal for a smooth, satisfying throat hit at low power.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x Vaporesso GTX Mesh Coils (resistance as selected)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGTX coils are not compatible with GTi coil tanks such as the iTank or iTank 2. Check your device manual for coil compatibility before ordering.\u003c\/span\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"0.2Ω","offer_id":39282010128458,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.3Ω","offer_id":39282010161226,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.6Ω","offer_id":39282010193994,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.8Ω","offer_id":39282010226762,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"1.2Ω","offer_id":39282010259530,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":false},{"title":"0.15","offer_id":39999953829962,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm","offer_id":40353987199050,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/vaporesso-coils-vaporesso-gtx-coils-pack-of-5-27990780117066.jpg?v=1641933632"},{"product_id":"horizontech-sakerz-coils-pack-of-3","title":"HorizonTech Sakerz Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSakerz Coils 3 Pack\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe HorizonTech Sakerz replacement coils are mesh DTL coils sold in packs of three, designed for use in the Sakerz and Sakerz Master sub-ohm tanks. There are three variants in the range covering different wattage levels and draw styles, all using a press-fit installation that requires no threading. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThey are recommended with 70% VG or higher e-liquid. The horizon tech sakerz coils range is sometimes referred to as horizontech sakerz coils, horizon sakerz coils, or simply sakerz coils - all names refer to the same product.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eHorizonTech Sakerz Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 3 replacement coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree variants: 0.16ohm, 0.17ohm 2-in-1, and 0.4ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMesh coil construction throughout the range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit, threadless installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDTL vaping across all variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Sakerz and Sakerz Master tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e70% VG or higher e-liquid recommended\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCoil Variants\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree variants are available, each sold as a pack of 3:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.16ohm mesh coil\u003c\/strong\u003e, rated at 70W. Single mesh, highest vapour output in the range, faster e-liquid consumption. The sakerz coils 0.16 pack suits vapers who want maximum cloud production and are happy topping up more frequently.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.17ohm 2-in-1 mesh coil\u003c\/strong\u003e, rated at 70W. Dual-layer mesh design, widely considered the flagship Sakerz coil. The sakerz coils 0.17 pack delivers a balance of flavour and vapour that many vapers prefer for day-to-day use.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.4ohm mesh coil\u003c\/strong\u003e, rated at 40W. Cooler and slightly more restricted DTL draw, lower wattage requirement. The sakerz coils 0.4 pack suits vapers who want a less intense DTL experience or are running a lower-powered mod.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eInstallation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll Sakerz coils use a threadless press-fit system. Unscrew the base of the tank from the glass section, pull out the old coil using the wrench tool supplied with the tank, and press the new coil into place until it seats. Reattach the base and you're ready to go. Before vaping on a new coil, add e-liquid and let it sit for a few minutes so the mesh is fully saturated. This avoids a dry hit on the first pull.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTank Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese coils are compatible with both the HorizonTech Sakerz tank and the HorizonTech Sakerz Master tank. They are not compatible with earlier HorizonTech tanks in the Falcon range. If you're unsure which tank you have, check the name printed on the base or the box it came in. Both the Sakerz and Sakerz Master are currently listed on Vapeology.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Guide\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll three coil variants perform best with 70% VG or higher e-liquid. High-VG shortfills and freebase e-liquids in the 70-80% VG range are the standard choice for sub-ohm DTL setups like this. Thinner 50\/50 e-liquids can flood the coil and shorten its life. Nicotine salt e-liquids are not typically recommended for sub-ohm DTL use as the higher wattage and vapour volume make standard nic salt strengths too harsh to inhale comfortably.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3 x HorizonTech Sakerz replacement coils (variant as selected)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HorizonTech","offers":[{"title":"0.16Ω Mesh","offer_id":39334126944330,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":false},{"title":"0.17Ω 2in1 Mesh","offer_id":39334126977098,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"0.4Ω Mesh","offer_id":39508595343434,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/horizontech-sub-ohm-coils-horizontech-sakerz-coils-pack-of-3-horizontech-sakerz-coils-pack-of-3-vapeology-28082999754826.jpg?v=1641908615"},{"product_id":"vaporesso-gti-mesh-coils-pack-of-5","title":"Vaporesso GTi Mesh Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso GTi Replacement Coils (5 Pack)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/vaporesso\" title=\"Browse our vaporesso vape range \"\u003eVaporesso\u003c\/a\u003e GTi coils are sub-ohm mesh replacement coils designed for DTL vaping with the iTank, iTank 2, and iTank T. They use a press-fit installation system, so you push the coil into the base of the tank without any screwing. Four single mesh resistances are available, ranging from the high-powered 0.15Ω (75 to 90W) down to the lower-wattage 0.5Ω (30 to 40W), plus two dual mesh options for vapers who want even richer flavour. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll GTi coils feature Vaporesso's Morph-Mesh heating structure and COREX cotton wicking, which together provide more even heating and longer coil life than standard mesh designs. Sold in packs of five. High VG e-liquids of 70% VG or above are recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003eGTi Coil Key Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSub-ohm mesh coils for DTL vaping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation (no screwing required)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMorph-Mesh structure with COREX cotton wicking\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFour single mesh and two dual mesh options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with all Vaporesso iTank, iTank 2, and iTank T tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAlso fits Target, Gen, and Armour series kits\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold in 5-packs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-gti-mesh-coils-spec-1.webp?v=1772704448\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eGTi Coil Wattage and Resistance Guide\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChoosing the right GTi coil depends on how much vapour and warmth you want. Lower resistance coils draw more power and produce bigger, warmer clouds. Higher resistance coils run at lower wattages for a slightly cooler, more restrained draw. Here is the full range with recommended wattage settings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTi 0.15Ω Mesh Coil \u003c\/strong\u003e(75 to 90W)\u003c\/span\u003e\u003cspan\u003e – The highest-powered option in the GTi range. Best suited to vapers who want maximum cloud production and a warm, intense DTL draw. Works well at around 85W for the best balance of flavour and vapour density.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTi 0.2Ω Mesh Coil \u003c\/strong\u003e(60 to 75W)\u003c\/span\u003e\u003cspan\u003e – The most popular all-rounder in the range. This coil uses a NiChrome 80 (Ni80) wire mesh, which heats up quickly and delivers strong vapour with a slightly warmer draw. A good starting point is around 65W. This is the coil included pre-installed in the Armour Max and Armour S kits.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTi 0.4Ω Mesh Coil \u003c\/strong\u003e(50 to 60W)\u003c\/span\u003e\u003cspan\u003e – A flavour-focused coil that runs at moderate wattage. This one uses FeCrAl (Kanthal) wire, which many vapers find produces a wetter, more flavourful hit compared to the Ni80 in the 0.2Ω coil. Best at around 55W. This is the spare coil included in the Armour Max and Armour S kit boxes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTi 0.5Ω Mesh Coil \u003c\/strong\u003e(30 to 40W)\u003c\/span\u003e\u003cspan\u003e – The lowest-wattage option, delivering a cooler draw with decent flavour and lower e-liquid consumption. A good choice if you want to save battery life or prefer a less intense vape. Best at around 35W.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTi 0.2Ω Dual Mesh Coil\u003c\/strong\u003e (60 to 75W)\u003c\/span\u003e\u003cspan\u003e – Uses two mesh heating elements instead of one for more surface area contact with e-liquid. The result is richer, more intense flavour with denser vapour compared to the single mesh 0.2Ω coil at the same wattage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eGTi 0.4Ω Dual Mesh Coil\u003c\/strong\u003e (50 to 60W)\u003c\/span\u003e\u003cspan\u003e – The dual mesh version of the 0.4Ω, offering the same flavour-forward Kanthal character with boosted intensity. A strong option for vapers who enjoy sweet, dessert, or fruity e-liquids and want maximum flavour extraction at moderate wattages.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-gti-mesh-coils-spec-2.webp?v=1772704448\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMorph-Mesh Structure with COREX Cotton\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll GTi coils use Vaporesso's Morph-Mesh design, which arranges the mesh heating element in a pattern that distributes heat more evenly across the entire coil surface. This reduces hot spots and gives a more consistent flavour from the first puff to the last. The COREX cotton wicking material is fluffier and more absorbent than standard cotton, allowing it to saturate faster and deliver e-liquid to the mesh more efficiently. Vaporesso states this combination improves vaporisation efficiency and extends coil life by up to 50% compared to standard mesh coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-gti-mesh-coils-spec-3.webp?v=1772704448\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGTi coils push straight into the base of the iTank, iTank 2, or iTank T without any threading or twisting. To install a new coil, pull the old one out from the bottom of the tank base and push the new one in until it clicks into place. There is no alignment required. This makes coil changes quick and tool-free. Before your first vape on a new coil, fill the tank and let the coil soak for 5 to 10 minutes so the cotton is fully saturated. Starting at a lower wattage and working up gradually over the first few fills will also help the coil bed in and last longer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGTi coils fit every Vaporesso tank and kit that uses the iTank coil platform. This includes the following tanks and kits:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso iTank, iTank 2, and iTank T\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Armour Max and Armour S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Target 100 and Target 200\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Gen 80S and Gen 200\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Gen SE and Gen Max\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your Vaporesso kit or tank came with a GTi coil, any other GTi coil in the range will fit it. The GTi platform is separate from the GTX coil system used in the XROS, Luxe, and Armour G\/GS pod kits, so GTi and GTX coils are not interchangeable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Recommendations\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll GTi coils are designed for use with high VG e-liquids. A 70\/30 VG\/PG ratio or higher is recommended for the best wicking and vapour production. Shortfill e-liquids work well across the full range. Because these coils produce large amounts of vapour at sub-ohm resistances, nicotine strengths of 6mg or lower are generally recommended to keep the throat hit comfortable. Freebase nicotine e-liquids are the standard choice for sub-ohm DTL vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x Vaporesso GTi Mesh Coils (resistance as selected)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHigh VG e-liquids of 70% VG or above are recommended. GTi coils are not compatible with GTX coil tanks or pods.\u003c\/span\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"0.15Ω Mesh","offer_id":40499983876170,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true},{"title":"0.2Ω Mesh 60-75W","offer_id":39540560068682,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true},{"title":"0.4Ω Mesh 50-60w","offer_id":39540560101450,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true},{"title":"0.5Ω Mesh","offer_id":40499983908938,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-coils-vaporesso-gti-mesh-coils-pack-of-5-31118261813322.jpg?v=1713786550"},{"product_id":"aspire-flexus-coils-pack-5","title":"Aspire AF Meshed Replacement Coils (Pack Of 5)","description":"\u003ch2\u003eAspire AF Meshed (Flexus) Replacement Coils (Pack Of 5)\u003c\/h2\u003e\n\u003cp\u003eThe Aspire AF Meshed replacement coils are compatible with the Flexus pod, which is included with the Aspire Flexus Pod kit, as well as the Flexus Blok, Aspire AF Tank and Flexus AIO. They are made of high-quality materials. Regardless of which coil you choose, both will provide an accurate MTL (Mouth to Lung) inhale with a small amount of vapour in the exhale. The 0.6 Ohm coil, on the other hand, produces a little more vapour than the 1.0 Ohm coil does.\u003c\/p\u003e\n\u003cp\u003eBecause of the mesh lattice construction used in both coils, your e-liquid will heat up more quickly and have a better flavour. If you're using the 0.6 Ohm coil, we recommend that you set your kit's power to anywhere between 15 and 18 watts. However, if you've picked the 1.0 Ohm variant, we recommend vaping it at a power of 12 - 15 watts instead. Using an e-liquid with a 50\/50 or high PG percentage will produce the best results when used in conjunction with either coil.\u003c\/p\u003e\n\u003ch3\u003eAspire Flexus Coils Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMTL Vaping\u003c\/li\u003e\n\u003cli\u003eMesh Build\u003c\/li\u003e\n\u003cli\u003eMultiple Resistances\u003c\/li\u003e\n\u003cli\u003eCompatible With High PG E-Liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat Vape Kit are the Flexus Replacement Coils compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe Aspire AF Meshed Replacement Coils are compatible with the following devices:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAspire Flexus Q (0.4 Ohm not compatible)\u003c\/li\u003e\n\u003cli\u003eAspire Flexus Blok \u003cmeta charset=\"utf-8\"\u003e(0.4 Ohm not compatible)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAspire Flexus AIO \u003cmeta charset=\"utf-8\"\u003e(0.4 Ohm not compatible)\u003c\/li\u003e\n\u003cli\u003eAspire AF Tank\u003c\/li\u003e\n\u003cli\u003eAspire Flexus Pro \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Aspire","offers":[{"title":"0.4Ω Mesh","offer_id":41571172679754,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true},{"title":"0.6Ω Mesh","offer_id":39598074626122,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true},{"title":"1.0Ω Mesh","offer_id":39598074658890,"sku":null,"price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/aspire-coils-aspire-flexus-replacement-coils-pack-of-5-28470443868234.jpg?v=1642863684"},{"product_id":"geekvape-g-series-coils-pack-of-5","title":"GeekVape G Series Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekVape Aegis Pod Replacement Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GeekVape G Series coils are the replacement coils for the Aegis Pod, Aegis Pod 2 (AP2), Wenax Stylus, Wenax C1, G18 Starter Pen Kit, and several other GeekVape pod systems. They use a KA-1 Kanthal mesh heating element and are designed for MTL and restricted DTL vaping with nic salts or high-PG e-liquid. Coils are press-fit with no threading required and are sold in packs of five. Seven resistance options are available, ranging from 0.6Ω for a more open draw down to 1.8Ω for an extra tight cigarette-style MTL. These coils are also known as G.Coil Pod Formula and Aegis Pod G Coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you are looking for the 0.4Ω coil for the GeekVape E100 (Aegis Eteno) or E100i, that is a P Series coil rather than a G Series coil and is listed separately on our GeekVape P Series Coils page.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eG Series Coil Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 5 coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eKA-1 Kanthal mesh construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSeven resistance options from 0.6Ω to 1.8Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMTL and restricted DTL vaping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation, no threading\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with nic salts and high-PG \/ 50\/50 e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFits Aegis Pod, AP2, Wenax Stylus, Wenax C1, G18 and more\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAlso known as Aegis Pod coils and G.Coil Pod Formula\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePack of 5 Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pack contains five G Series coils. Having spares on hand means you can change the coil as soon as flavour starts to fade without waiting for a new order to arrive. At typical usage levels a coil lasts several days to a week, so a pack of five covers most vapers for several weeks of use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eKA-1 Kanthal Mesh Construction\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eG Series coils use a KA-1 Kanthal mesh heating element wrapped around organic cotton. The mesh format spreads heat evenly across a larger surface area than a standard wire coil, which improves flavour consistency and reduces the chance of hot spots that can cause dry hits. Kanthal is a well-established coil material known for stable resistance across a wide temperature range and a long usable lifespan.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSeven Resistance Options from 0.6Ω to 1.8Ω\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe full G Series range covers everything from a restricted open-lung draw to an extra tight cigarette-style inhale. All seven options use the same press-fit fitting and are interchangeable in any compatible device.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6Ω \u003c\/strong\u003eruns at 13-18W for a restricted DTL draw. Best with high-VG or 50\/50 freebase e-liquid and the airflow fully open.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.8Ω \u003c\/strong\u003eruns at 12-15W for a light MTL or very restricted DTL draw. Suits 50\/50 freebase or nic salts up to 20mg.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.0Ω\u003c\/strong\u003e runs at 10-12W for a standard MTL draw. Suits nic salts up to 30mg or 50\/50 freebase e-liquid.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.2Ω \u003c\/strong\u003eruns at 9.5-11.5W for a tighter MTL draw. Well suited to nic salts at 20mg and above.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.2Ω\u003c\/strong\u003e S runs at 8-12W with a single airflow slot for a tighter MTL draw than the standard 1.2Ω.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.2Ω\u003c\/strong\u003e M runs at 10-12W with a modified airflow slot configuration, sitting between the standard and S versions in draw tightness.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.8Ω\u003c\/strong\u003e runs at 7-9W for the tightest, most cigarette-like MTL draw in the G Series range. Best with nic salts up to 50mg at lower-wattage devices.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMTL and Restricted DTL Vaping\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe G Series range is designed primarily for mouth-to-lung vaping, which means drawing vapour into the mouth first before inhaling to the lungs. This style is closest to the feel of a cigarette and is the most common choice for people using nic salts or making the switch from smoking. The 0.6Ω and 0.8Ω options extend into restricted DTL territory, giving a slightly looser draw with more vapour for those who prefer a fuller inhale without going fully open-lung.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eG Series coils push straight into the base of the pod with no threading or screwing required. To install, remove the pod from the device, push the old coil out from the bottom, and press the new coil in until it seats firmly. Before vaping, prime the new coil by adding a few drops of e-liquid to the exposed cotton at the base and leaving it to soak for three to five minutes. This prevents dry hits on the first draw and helps the coil reach its full flavour performance sooner.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible with Nic Salts and High-PG \/ 50\/50 E-Liquids\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eG Series coils are designed for use with nic salts and high-PG or 50\/50 freebase e-liquids. The tighter draw and lower wattage of most G Series options suits higher-nicotine e-liquids well. High-VG freebase e-liquid at 70VG or above is better suited to the 0.6Ω option at the lower end of the range, where the slightly higher wattage and more open draw can handle thicker e-liquid without the wick struggling to keep up.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe G Series coil fits the following GeekVape devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Aegis Pod\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Aegis Pod 2 (AP2)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Wenax Stylus\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Wenax C1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape G18 Starter Pen Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Digi-Uno\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Siren G\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDigiflavor DU Pod\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you are unsure whether your device takes G Series coils, check the coil that came fitted with your kit. G Series coils are labelled with the G prefix and resistance value on the side of the coil body.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x GeekVape G Series coils (resistance as selected)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Geekvape","offers":[{"title":"1.2 Ohm","offer_id":39601043734602,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":false},{"title":"1.8 Ohm","offer_id":39601043767370,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm","offer_id":40787216465994,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/geekvape-coils-geekvape-g-series-coils-pack-of-5-28471867277386.jpg?v=1643023163"},{"product_id":"smok-rpm-3-coils-pack-of-5","title":"SMOK RPM 3 Replacement Coils 5 Pack","description":"\u003ch2 class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eSMOK RPM 3 Coils\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eCompatible with the SMOK RPM 5, RPM 5 Pro, Nord 5, RPM 85, RPM 100, and Nord GT. If you're looking for coils for any of these devices, this is the correct product - the RPM 3 coil range is the standard fit across all of them.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eBoth coils in the range are mesh and designed for direct-to-lung vaping. The 0.15ohm option is rated at 40–80W for higher-powered use, while the\u003cstrong\u003e \u003c\/strong\u003e0.23ohm runs at 20–45W and offers a slightly smoother, more restrained draw. The right choice largely depends on your preferred wattage and how much vapour output you're after.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eSold in packs of five. You may also see these referred to as RPM5 coils or RPM 3 mesh coils - these all refer to the same product.\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSMOK RPM 3 Replacement Coils 5 Pack Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo mesh variants: 0.15ohm (40-80W) and 0.23ohm (20-45W)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBoth variants are DTL; the 0.23ohm gives a more restricted draw\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with RPM 5, RPM 5 Pro, Nord 5, RPM 85, RPM 100, and Nord GT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation into the pod\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.15ohm RPM 3 Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.15ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage range: 40-80W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: DTL (direct-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: mesh coil with enlarged heating surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: high VG, 70%+ recommended; not suitable for nic salts at this wattage range. Use 3mg or 6mg freebase\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: dense vapour and strong flavour at higher wattage; faster ramp-up time than the 0.23ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.23ohm RPM 3 Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.23ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage range: 20-45W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: restricted DTL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuild: mesh coil with even heat distribution across the surface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: 50\/50 or higher VG; compatible with nic salts at lower wattage settings (around 20W). Up to 20mg works at this resistance if you keep wattage down\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBest for: a smoother and more consistent vape than the 0.15ohm; also the better option if you want to use nic salts in a DTL device\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDevice Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRPM 3 coils fit into RPM 5 series pods and Nord 5 pods. If you have a SMOK Nord 5 and are searching for Nord 5 coils, these are the correct product. The same coils fit both devices via their respective pods. They do not fit original RPM pods, RPM 2 pods, or any other pod platform.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK RPM 5 Pod Kit (via RPM 5 pod)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK RPM 5 Pro Kit (via RPM 5 pod)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord 5 Kit (via Nord 5 pod)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK RPM 85 Kit (via RPM 85 pod)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK RPM 100 Kit (via RPM 100 pod)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSMOK Nord GT Kit (via Nord GT pod)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNot compatible with: original RPM pods, RPM 2 pods, RPM 4 pods, Nord pods, or LP2 pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x SMOK RPM 3 Mesh Coils (in your chosen resistance)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smok","offers":[{"title":"0.15Ω (40-80W)","offer_id":39723286626378,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":false},{"title":"0.23Ω (20-25W)","offer_id":39723286659146,"sku":null,"price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/smok-coils-smok-rpm-3-coils-pack-of-5-28645066014794.png?v=1649155041"},{"product_id":"vaporesso-mtx-coils","title":"Vaporesso MTX Vape Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso MTX Replacement Coils for the iTank M\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/vaporesso\" title=\"Browse our vaporesso vape range \"\u003eVaporesso\u003c\/a\u003e MTX coils are the dedicated replacement coils for the iTank M tank, which is paired with the Vaporesso GEN Fit kit. They are designed specifically for mouth to lung vaping, delivering the kind of tight, flavour-focused draw that suits vapers who prefer a style closer to smoking a cigarette. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree resistance options are available: 0.8Ω, 1.2Ω and 1.4Ω, covering a range of output levels and nicotine preferences. All three use a simple push-fit installation that takes seconds and requires no tools. Sold in packs of five, they offer a cost-effective way to keep your iTank M performing at its best.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso MTX Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with the Vaporesso iTank M tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree resistance options: 0.8Ω, 1.2Ω and 1.4Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMTL vaping style\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePush-fit installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 coils per pack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWorks with 50\/50 and high-PG e-liquids, including nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eConsistent flavour delivery at lower wattages\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGenuine Vaporesso coils\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible with the Vaporesso iTank M Tank\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe MTX coil series was built exclusively for the Vaporesso iTank M tank, which ships as standard with the GEN Fit kit. If you own a GEN Fit, these are the correct replacement coils. The iTank M uses a 510 thread connection and a bottom-mounted airflow control ring, and the MTX coils are the only coil series designed to fit and perform correctly in this tank. Using coils from other Vaporesso series, such as the GTX range, is not compatible with the iTank M, so it is worth checking the coil name before ordering. All three resistance variants covered below use the same physical format and fit identically into the tank.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eResistance Options: 0.8Ω, 1.2Ω and 1.4Ω\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThree versions of the Vaporesso MTX coil are available, each suited to a slightly different output level and vaping preference. The 0.8Ω coil operates between 12 and 16W, making it the warmest and most vapour-forward option in the range. The 1.2Ω coil runs at 8 to 12W and is the most widely used, offering a well-balanced MTL draw with good flavour and manageable warmth. The 1.4Ω coil runs at 8 to 10W, producing a cooler and more restrained inhale that suits vapers who prefer a lighter vape or who are using higher nicotine concentrations. All three are sold in the same five-pack format.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMTL Vaping Style\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMTL, or mouth to lung, describes a vaping style where you draw vapour into your mouth first before inhaling into your lungs, which mirrors the action of smoking a traditional cigarette. The Vaporesso MTX coils are built for this style, operating at wattages well below those used for direct to lung or sub-ohm vaping. The restricted draw and lower vapour output make MTL vaping more discreet and particularly well suited to higher-nicotine e-liquids, where a smaller volume of vapour delivers a satisfying hit without needing to inhale a large amount. If you are switching from smoking or already use an MTL setup, the GEN Fit with MTX coils is a natural fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePush-Fit Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe MTX coils use a push-fit design, meaning they press directly into the base of the iTank M coil housing without any threading or twisting. To swap a coil, remove the tank base, pull out the old coil and push the new one in until it clicks into position, then reassemble the tank. Before vaping on a new coil, allow three to five minutes for the e-liquid to fully saturate the wicking material. Starting at the lower end of the wattage range and gradually increasing output over the first few puffs also helps to extend the coil's lifespan and avoid the dry, burnt taste that can occur when a fresh coil is over-driven before it is primed properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e5 Coils Per Pack\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pack of Vaporesso MTX coils contains five units, keeping running costs low when you factor in how straightforward the replacement process is. Coil lifespan varies depending on how frequently you vape and which e-liquids you use, but many users report getting between one and two weeks from each coil under regular daily use. Sweeter e-liquids, particularly those with heavy flavouring, tend to shorten coil life as residue builds up on the wicking material more quickly. Sticking to the recommended wattage range and keeping the tank reasonably topped up will help you get the most from each coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Vaporesso MTX coils work best with 50\/50 (equal parts PG and VG) e-liquids and higher-PG blends. High-PG liquids are thinner in consistency, which helps them wick through the coil material more freely at lower wattages, keeping the coil moist and the flavour clean. Nic salt e-liquids, which are typically available in 50\/50 blends at 10mg or 20mg nicotine strengths, are a particularly good match for MTL coils and work well with all three resistance options. Thick, high-VG shortfill e-liquids are not recommended, as the viscosity can restrict wicking at low wattages and lead to dry hits. If you are using freebase nicotine e-liquid, a 50\/50 blend at your preferred strength will perform well.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eGenuine Vaporesso Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese are authentic Vaporesso MTX coils manufactured to the same specification as the coil supplied with the GEN Fit kit. Genuine coils carry an authenticity sticker and maintain the correct resistance tolerance, which matters for consistent performance and compatibility with the GEN Fit's AXON chip. The chip reads coil resistance to manage power output and pulse mode delivery, so using off-brand or counterfeit alternatives can affect both performance and the accuracy of the device's power settings. Buying from a reputable UK stockist ensures the coils you receive are genuine and MHRA-compliant.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x Vaporesso MTX coils (choose your resistance at the point of purchase)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSelect your preferred resistance when adding to your basket.\u003c\/span\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"0.8Ω","offer_id":39863764910154,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":false},{"title":"1.2Ω","offer_id":39863764975690,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":false},{"title":"1.4Ω","offer_id":39863765041226,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/vaporesso-coils-vaporesso-mtx-coils-pack-of-5-28999320010826.png?v=1654522099"},{"product_id":"voopoo-ito-coils-pack-of-5","title":"VOOPOO ITO Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO ITO Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO ITO replacement coils are sold in packs of five and are designed for use with the ITO pod and ITO-X pod, which are found in devices including the VOOPOO Drag Q, Doric 20, Doric E and Argus P1. The ITO coil range covers four resistances, from a 0.5 Ohm option suited to a restricted direct-lung draw down to a 1.2 Ohm option for a tight mouth-to-lung vape. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll four variants use a mesh heating element and press-fit installation, so replacement takes seconds and does not require screwing or threading. The range is built around MTL vaping at lower wattages, making it a strong choice for vapers using nicotine salts or higher-PG e-liquids who want good flavour without high power consumption.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO ITO Replacement Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 5 coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFour resistance options: 0.5 Ohm, 0.7 Ohm, 1.0 Ohm, 1.2 Ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMesh heating element on all variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation, no screwing required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMTL and RDL vaping covered across the range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with ITO pod and ITO-X pod\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSuited to nicotine salts and 50\/50 e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWorks with Drag Q, Doric 20, Doric E and Argus P1\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Resistances Across the ITO Range\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe ITO coil range spans four resistance options, each designed for a different draw style and wattage range. The full breakdown is as follows:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eITO-M0 0.5 Ohm:\u003c\/strong\u003e\u003cspan\u003e Rated 18 to 25W. Suited to a restricted direct-to-lung (RDL) draw with more open airflow. Produces more vapour than the MTL options and works well with high-VG or 70\/30 e-liquids. The loosest draw in the range.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eITO-M1 0.7 Ohm:\u003c\/strong\u003e\u003cspan\u003e Rated 14 to 18W. Sits between the 0.5 Ohm RDL option and the tighter MTL coils. Suits vapers who prefer a slightly restricted draw without the fully open feel of the 0.5 Ohm. Versatile across 50\/50 and higher-PG e-liquids.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eITO-M2 1.0 Ohm:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eRated 10 to 14W. Designed for MTL vaping with a moderately open draw. Works best at around 12W and performs well with 50\/50 e-liquids and nicotine salts up to 20mg. A good all-round MTL option for everyday use.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eITO-M3 1.2 Ohm:\u003c\/strong\u003e\u003cspan\u003e Rated 8 to 12W. The tightest draw in the range, replicating a close-to-cigarette inhale. Runs at its best around 10W and is best paired with higher-PG e-liquids and nicotine salts in the 10 to 20mg range.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMesh Heating Element\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery coil in the ITO range uses a mesh heating element rather than a standard wire coil. Mesh covers a larger surface area, which heats more e-liquid at once and produces flavour more evenly across the wick. The result is a cleaner, more consistent taste from the first pull, with less variation across the life of the coil. Mesh also tends to heat up faster than a round-wire equivalent at the same wattage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eITO coils are fitted by pressing them directly into the base of the ITO or ITO-X pod. There is no threading and no screwing. The coil clicks into place and is removed by pressing it out from the other side. This makes coil changes quicker and cleaner than with a traditional tank setup. The pod does not need to be emptied before changing the coil, though keeping the juice level above a third helps to avoid a dry hit during the transition.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices and Pods\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eITO replacement coils are compatible with two pod types: the standard VOOPOO ITO pod and the VOOPOO ITO-X pod. The ITO pod is used with the Doric 20 and Doric E; the ITO-X pod is used with the Drag Q and Doric Q. Both pods use the same coil fitting, so a single pack of ITO coils covers the full list of compatible devices. They are also confirmed to work with the VOOPOO Argus P1. If you are unsure which pod your device takes, the device name and pod type are printed on the original packaging.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eRecommended E-Liquids\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.0 Ohm and 1.2 Ohm MTL coils are best used with 50\/50 (PG\/VG) e-liquids and nicotine salts. Higher-PG e-liquids wick efficiently through these coils at low wattages and deliver a clean throat hit. The 0.7 Ohm coil accepts both 50\/50 and higher-VG blends. The 0.5 Ohm RDL option requires a higher-VG e-liquid, ideally 60% VG or above, to wick properly at the higher wattages it runs at. Using a thick, high-VG shortfill in a 1.0 Ohm or 1.2 Ohm coil will result in slow wicking and a dry, burnt taste regardless of how well the coil is primed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePriming and Getting Started\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore first use, fit the new coil into the pod, fill the pod with e-liquid, and leave it to sit for at least five minutes before vaping. This allows the wick to fully saturate and avoids a dry hit on the first draw. Once primed, start at the lower end of the coil's wattage range and increase from there to find the output that suits your preferred draw. Coil life varies depending on the e-liquid used, wattage setting and frequency of use, but most vapers get several days from each coil under normal conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Pack\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x VOOPOO ITO coils (one resistance per pack)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAvailable in ITO-M0 0.5 Ohm, ITO-M1 0.7 Ohm, ITO-M2 1.0 Ohm and ITO-M3 1.2 Ohm. Select the resistance that matches your preferred vaping style at the top of the page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Voopoo","offers":[{"title":"ITO-M0 0.5Ω","offer_id":39939642261578,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"ITO-M3 1.2Ω","offer_id":39939642294346,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"ITO-M2 1.0","offer_id":40095310413898,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.7 Ohm","offer_id":40197035524170,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/voopoo-coils-voopoo-ito-coils-pack-of-5-29241240879178.png?v=1658587396"},{"product_id":"voopoo-ito-x-pod","title":"VOOPOO ITO-X Pod","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO ITO-X Replacement Pod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe VOOPOO ITO-X pod is a refillable replacement pod for the VOOPOO Drag Q and Doric Q. It holds 2ml of e-liquid in the UK version, fills from the top, and uses the full range of VOOPOO ITO coils, which are sold separately. The pod includes two mouthpieces: a wider, shorter option and a narrower, taller option, so the draw style can be adjusted to suit the fitted coil. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIt connects to the device via a magnetic buckle and is available in Black and Silver. The ITO-X is the top-filling pod designed for the Drag Q; the standard ITO pod used in the Doric 20 and Doric E is a different product with side filling.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO ITO-X Pod Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml e-liquid capacity (UK TPD version)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop-fill port with threaded cap\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo mouthpieces included: wide and narrow\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with all VOOPOO ITO coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit coil installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic connection to device\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStainless steel and PCTG construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAvailable in Black and Silver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold as a single pod\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe ITO-X pod is designed for use with the VOOPOO Drag Q and VOOPOO Doric Q. Both devices use the ITO-X pod as their primary refillable cartridge. The Doric E is also confirmed as compatible by VOOPOO. The ITO-X pod is not interchangeable with the standard ITO pod, which has a different form factor and is used in the Doric 20, Doric 60 and Doric E with side filling. If you are unsure which pod your device requires, the device name and pod type are printed on the original packaging or in the user manual.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eITO Coil Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe ITO-X pod accepts all four coils in the VOOPOO ITO range. Coils are not included with the pod and must be purchased separately. Fitting is press-fit: the coil pushes into the base of the pod and pulls out the same way, with no screwing required. The pod does not need to be fully empty before a coil change.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eITO-M0 0.5 Ohm:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e18 to 25W. RDL vaping, open draw. Best with 60% VG or higher e-liquids.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eITO-M1 0.7 Ohm:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e14 to 18W. Light MTL to RDL. Versatile across 50\/50 and higher-VG blends.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eITO-M2 1.0 Ohm:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e10 to 14W. MTL vaping. Best with 50\/50 e-liquids and nicotine salts.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eITO-M3 1.2 Ohm:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e8 to 12W. Tight MTL, closest to a cigarette draw. Best with high-PG e-liquids and nicotine salts.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe VOOPOO Drag X is a different device that uses PnP coils, not ITO coils. The ITO-X pod is not compatible with the Drag X.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop Filling and Leak Resistance\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe ITO-X pod fills via a threaded cap on the top of the pod. Unscrewing the cap reveals the fill port, which accepts most standard bottle nozzles without needing to remove the pod from the device. Replacing the cap firmly after filling reduces the risk of leaks. The pod uses a magnetic buckle to connect to the device, which holds it securely in place during normal use. Stainless steel and PCTG construction keeps the pod lightweight while maintaining a solid build quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo Mouthpieces\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach ITO-X pod comes with two mouthpieces in the box. The wider, shorter option suits an open RDL draw with the 0.5 Ohm or 0.7 Ohm coil. The narrower, taller option produces a tighter draw closer to MTL and works well with the 1.0 Ohm and 1.2 Ohm coils. Swapping the mouthpiece takes a few seconds and makes a noticeable difference to the draw resistance without adjusting the device settings. Using a narrower mouthpiece with a lower-resistance coil is not recommended, as the restricted airflow can cause the coil to overheat.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eRecommended E-Liquids\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe ITO-X pod is suited to 50\/50 (PG\/VG) e-liquids and nicotine salts when used with the 1.0 Ohm and 1.2 Ohm MTL coils. Higher-PG e-liquids wick cleanly through these coils at low wattages and give a consistent throat hit. The 0.7 Ohm coil is versatile and accepts both 50\/50 and higher-VG blends. The 0.5 Ohm RDL coil requires a higher-VG e-liquid, ideally 60% VG or above, to wick properly at the wattages it operates at. Using a thick high-VG shortfill in a 1.0 Ohm or 1.2 Ohm coil will result in slow wicking and a dry hit regardless of how well the coil has been primed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO ITO-X Pod Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x VOOPOO ITO-X replacement pod (2ml)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2 x mouthpieces (wide and narrow)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCoils are not included. VOOPOO ITO replacement coils are available separately in 0.5 Ohm, 0.7 Ohm, 1.0 Ohm and 1.2 Ohm. Prime the coil and allow it to soak for at least five minutes before first use.\u003c\/span\u003e\u003c\/p\u003e","brand":"Voopoo","offers":[{"title":"Single Black Pod (No Coils)","offer_id":39939647963210,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Single Silver Pod (No Coils)","offer_id":39939647995978,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/voopoo-replacement-pods-voopoo-ito-x-pod-29241260965962.jpg?v=1658587758"},{"product_id":"vaporesso-luxe-x-replacement-pods","title":"Vaporesso Luxe X Replacement Pods (2 Pack)","description":"\u003ch2\u003eVaporesso Luxe X Replacement Pods (2 Pack)\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/vaporesso\" title=\"Browse our vaporesso vape range \"\u003eVaporesso\u003c\/a\u003e Luxe X replacement pods are compatible with the Vaporesso Luxe X vape kit and feature a capacity of 2 millilitres of e-liquid each. These pods come with an internal coil, which means they need very little maintenance. When one pod is used up, you can just replace it with a new one. Because there are two distinct iterations of this pod, you have the option of vaping either an RDTL or a DTL, which stands for \"restricted direct to lung\" and \"direct to lung,\" respectively. Both of them utilise a mesh construction, and although conventional coils have a smaller surface area, traditional mesh builds have a bigger surface area. This allows for more e-liquid to be vaporised at once, which results in better vapour and flavour creation.\u003c\/p\u003e\n\u003ch3\u003eVaporesso Luxe X Replacement Pods Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRefillable 2ml Pods\u003c\/li\u003e\n\u003cli\u003eBuilt-In Mesh Coils\u003c\/li\u003e\n\u003cli\u003eDesigned For MTL Vaping\u003c\/li\u003e\n\u003cli\u003eSSS Leak-Resistant Technology\u003c\/li\u003e\n\u003cli\u003eSide-Filling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere are two distinct replacement pods available for the Vaporesso Luxe X. The 0.4 Ohm pod provides a direct-to-lung (DTL) vape, which results in a more airy inhalation and a substantial amount of vapour production. We suggest using this pod in conjunction with high-VG E-liquids like as 70\/30 or others. Because the 0.8 Ohm pods produce an RDTL vape that has a more restricted airflow during inhalation and produces less cloud, we suggest using this pod in conjunction with an e-liquid that is either 50\/50 or high in PG. Vaporesso's SSS leak-resistant pods are featured in both of these pods. These pods produce an airtight environment that is less prone to experience leakage.\u003c\/p\u003e\n\u003ch3\u003eVaporesso Luxe Replacement Pod Contents:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Vaporesso Luxe X Refillable Pods\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vaporesso","offers":[{"title":"0.4Ω","offer_id":40047202795594,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.8Ω","offer_id":40047202828362,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":false},{"title":"0.6","offer_id":40642224717898,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/vaporesso-replacement-pods-vaporesso-luxe-x-replacement-pods-2-pack-29564860432458.jpg?v=1663926196"},{"product_id":"geekvape-e100-replacement-pods-2-pack","title":"GeekVape E100 Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekVape E100 Replacement Pod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GeekVape E100 replacement pod is the refillable pod tank for the Aegis Eteno (E100) and Aegis Eteno I (E100i) kits. It holds 2ml of e-liquid in the UK TPD version and comes supplied empty without coils, which are purchased separately from the GeekVape P Series range. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pod fills from the top via a quarter-turn cap and connects to the mod magnetically. Airflow is adjustable via a dual-slotted ring at the top of the pod. It is compatible with P Series sub-ohm mesh coils, making it suited to DTL vaping with high-VG e-liquid. Pods are sold in packs of two and are available in six colours.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekVape E100 Pod Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 2 pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml capacity (UK TPD)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with GeekVape P Series coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop-fill design with quarter-turn cap\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjustable top airflow ring\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit coil installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePods sold empty, coils purchased separately\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePack of 2 Pods\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pack contains two replacement pods. Having a spare means you can keep one pod primed and ready while the other is in use, which avoids downtime when swapping coils or flavours. It also makes it easier to keep different e-liquids in separate pods without mixing them.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2ml Capacity (UK TPD)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe E100 pod holds 2ml of e-liquid in the UK TPD version. Some listings outside the UK reference a 4.5ml capacity, which is the global version of the same pod. UK customers receive the 2ml TPD-compliant pod. The pod is made from stainless steel, PCTG, and Delrin for durability and chemical resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible with GeekVape P Series Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe E100 pod takes the full range of GeekVape P Series coils, all of which are sub-ohm mesh coils designed for DTL vaping. Four resistance options are available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.15Ω coil \u003c\/strong\u003esuits high wattage DTL vaping with the airflow fully open and high-VG e-liquid.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.2Ω coil \u003c\/strong\u003eis the most commonly used option and is included with the E100 kit when purchased new.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.4Ω coil \u003c\/strong\u003eruns at a lower wattage and suits a slightly cooler, more flavour-focused DTL vape.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.5Ω coil\u003c\/strong\u003e offers the lowest wattage in the P Series range and suits a more restrained DTL draw.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eP Series coils are sold separately in packs of five. All use press-fit installation and push straight into the base of the pod.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-Fill Design with Quarter-Turn Cap\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe fill port is at the top of the pod and accessed by turning the cap a quarter turn to open it. The pod does not need to be removed from the mod to refill. The top-fill design combined with the top airflow system keeps e-liquid away from the air path, which significantly reduces the chance of leaking during use or when carrying the device.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAdjustable Top Airflow Ring\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA dual-slotted ring at the top of the pod lets you adjust the amount of airflow going through the coil. Opening both slots gives a fuller, more open DTL draw. Closing one or both slots restricts the draw for a tighter vape. The top airflow design also helps prevent leaking as the air enters above the e-liquid rather than through the base.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMagnetic Connection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe base of the pod connects to the E100 and E100i via a magnetic seat with two gold-plated spring-loaded connection pins. The magnetic connection holds the pod securely during normal use but allows it to be removed and reattached in a single smooth movement. The pod can also be used on a standard 510-threaded mod with the GeekVape E100 510 adapter, which is sold separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Coil Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eP Series coils push straight into the base of the pod with no threading required. To change a coil, remove the pod from the mod, pull out the spent coil, and press the new one in until it clicks. Prime the new coil before use by adding a few drops of e-liquid to the exposed cotton and allowing it to soak for three to five minutes before vaping. This prevents dry hits on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePods Sold Empty, Coils Purchased Separately\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe E100 replacement pod is supplied without a coil fitted. You will need to purchase GeekVape P Series coils separately before you can use the pod. If you are buying replacement pods because your current coil has burnt out, you can transfer the new pod directly and fit a new coil at the same time. High-VG e-liquid of 60% VG or higher is recommended for use with all P Series coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekVape E100 Pod Colours\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBlack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGunmetal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSilver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBlue\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGold\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRainbow\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2 x GeekVape E100 replacement pods (empty, no coil fitted)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Geekvape","offers":[{"title":"Black","offer_id":40173284327498,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":40173284360266,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/geekvape-replacement-pods-geekvape-e100-replacement-pods-2-pack-29759981060170.png?v=1669734434"},{"product_id":"uwell-caliburn-a3-pods-pack-of-4","title":"Uwell Caliburn A3 Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUwell Caliburn A3 Refillable Pods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Uwell Caliburn A3 replacement pods are the dedicated refillable pods for the Caliburn A3, AK3, and AZ3 pod kit range. Each pod holds 2ml of e-liquid and comes with a pre-installed 1.0ohm FeCrAl meshed coil, making them a straightforward drop-in replacement without any coil-swapping required. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe top-fill system, accessed by lifting the mouthpiece, makes refilling quick and tidy. Clear PCTG construction means you can check your e-liquid level at a glance, and the magnetic base locks securely into the device. Sold in a pack of 4, these pods are a reliable choice for any mouth-to-lung vaper using a Caliburn A3 series kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003eUwell Caliburn A3 Replacement Pods Key Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml e-liquid capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1.0ohm FeCrAl meshed built-in coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop-fill system via removable mouthpiece\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic pod connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePCTG construction with e-liquid viewing window\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePro-FOCS flavour adjustment technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMouth-to-lung (MTL) vaping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Caliburn A3, AK3, and AZ3 kits\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold in a pack of 4\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2ml E-Liquid Capacity\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach Caliburn A3 pod holds a full 2ml of e-liquid, in line with UK TPD regulations. That capacity is comfortable for a day of moderate vaping before a refill is needed. The pod is made from transparent PCTG, so the e-liquid level is visible without removing the pod from the device. Keeping an eye on the level means you can top up before the coil runs dry, which helps avoid any burnt taste.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e1.0ohm FeCrAl Meshed Built-In Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pod comes with a 1.0ohm FeCrAl meshed coil already installed, so there is nothing to set up before use. Mesh coil construction spreads heat evenly across the wicking material, which improves flavour consistency and reduces the chance of hot spots. The 1.0ohm resistance is suited to mouth-to-lung vaping and pairs well with 50\/50 e-liquids and nicotine salts. Because the coil is integrated into the pod, you simply replace the whole pod when the coil reaches the end of its life.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-Fill System via Removable Mouthpiece\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRefilling the Caliburn A3 pod is a one-handed job. The mouthpiece lifts off to reveal the filling port underneath, and once you have added your e-liquid, the mouthpiece presses back into place. This top-fill design keeps the filling port away from the device's air channels, which reduces the chance of spillage reaching the battery section. It is worth giving the pod a few minutes to sit after filling so the coil can absorb the liquid before you start vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMagnetic Pod Connection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe base of each pod features a magnetic connection point that clicks firmly into the Caliburn A3, AK3, or AZ3 device. This means the pod is easy to insert and remove from either side without fumbling, and sits securely during use. The magnet holds the pod in place firmly enough to prevent accidental disconnection in a pocket or bag. When you are ready to swap in a fresh pod, the change takes only a second.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePCTG Construction with E-Liquid Viewing Window\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUwell uses PCTG (polycyclohexylenedimethylene terephthalate glycol) for the pod body, a material chosen for its durability and clarity. The transparent shell acts as a large e-liquid viewing window, giving you a clear, unobstructed view of what is left in the pod. There is no need to remove the pod from the kit to check the level. PCTG is also resistant to the chemicals found in e-liquid, which helps maintain the pod's clarity over its lifespan.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePro-FOCS Flavour Adjustment Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUwell's Pro-FOCS (Flavour Optimisation Coil System) technology is built into the Caliburn A3 pod design to improve flavour accuracy. The system is engineered to make better use of every drop of e-liquid that passes through the coil, reducing waste and maintaining consistent flavour output. Compared to earlier Caliburn pods, the A3 generation delivers a noticeably cleaner taste, particularly with fruit and menthol nicotine salts. This is one of the main reasons the Caliburn A3 range continues to be a well-regarded choice for flavour-focused vapers.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMouth-to-Lung (MTL) Vaping\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Caliburn A3 pods are designed specifically for a mouth-to-lung draw, which closely mirrors the sensation of smoking a traditional cigarette. The airflow and coil resistance work together to produce a tight, controlled draw with a satisfying throat feel, making these pods a natural fit for people switching from cigarettes. Nicotine salts in the 10mg to 20mg range pair particularly well with MTL setups, delivering a smooth hit without harshness. If you are new to pod vaping, this style of device is one of the most straightforward starting points available.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible with Caliburn A3, AK3, and AZ3 Kits\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese pods are cross-compatible across the Uwell Caliburn A3 series: the original Caliburn A3, the Caliburn AK3, and the Caliburn AZ3. All three devices use the same pod design and magnetic connection, so a single pack of replacement pods will work across any of these kits. It is worth noting that these pods are not compatible with the older Caliburn A2 or AK2 models. If you use an A3S kit, Uwell also produce a side-fill A3S pod that works alongside these top-fill versions.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSold in a Pack of 4\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pack contains four Caliburn A3 replacement pods. Having a pack of four to hand means you always have a fresh pod ready to go when one reaches the end of its coil life. Pod lifespan varies depending on the e-liquids you use and how frequently you vape, but most users find a single pod lasts one to three weeks with regular use. Sweeter e-liquids and high-VG blends tend to shorten coil life, while 50\/50 blends and nicotine salts are generally easier on the coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e4 x Uwell Caliburn A3 FeCrAl Meshed 1.0ohm Refillable Pods\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Uwell","offers":[{"title":"Default Title","offer_id":40177646960714,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/uwell-coils-uwell-caliburn-a3-pods-pack-of-4-29771182211146.png?v=1670060235"},{"product_id":"vaporesso-luxe-xr-replacement-pod","title":"Vaporesso Luxe XR Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso Luxe XR Pods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/vaporesso\" title=\"Browse our vaporesso vape range \"\u003eVaporesso\u003c\/a\u003e Luxe XR replacement pods are empty refillable pods that accept replaceable \u003ca href=\"https:\/\/www.vapeology.co.uk\/products\/vaporesso-gtx-coils-pack-of-5\" title=\"Buy vaporesso gtx vape coils \"\u003eGTX coils\u003c\/a\u003e, sold in packs of two with no coil included. They come in two types: an MTL pod for tighter draws and a DTL pod for looser, cloudier vaping. Each pod holds 2ml under UK TPD regulations and fills from the bottom through a silicone stopper. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGTX coils press-fit into the pod in seconds, so you only replace the coil when it wears out rather than the entire pod. The Luxe XR pods fit every device in the Luxe X family, including the Luxe X, X2, X3, X Pro, XR, XR Max, and \u003ca href=\"https:\/\/www.vapeology.co.uk\/products\/vaporesso-luxe-xr-max-2-pod-kit\" title=\"Shop for vaporesso luxe xr max 2 vape kit \"\u003eXR Max 2\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003eLuxe XR Pod Key Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMTL pod for 0.8 and 1.2 ohm GTX coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDTL pod for 0.2 to 0.6 ohm GTX coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eReplaceable GTX coils with press-fit installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml capacity with bottom-fill silicone stopper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSSS leak-resistant technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTransparent PCTG construction with magnetic connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with all seven Luxe X family devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHow to install coils and fill XR pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid recommendations by coil resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-luxe-xr-pods-spec-1.webp?v=1772706665\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMTL Pod for 0.8 and 1.2 Ohm GTX Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Luxe XR MTL pod has a narrow airway for a tight draw similar to a cigarette. It accepts the 0.8 ohm GTX Mesh coil (12-20W) and the 1.2 ohm GTX Mesh coil (7-11W). Both produce modest vapour with strong throat hit and concentrated flavour. Best suited to 50\/50 VG\/PG nicotine salt e-liquids at 10mg or 20mg.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-luxe-xr-pods-spec-5.webp?v=1772706751\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDTL Pod for 0.2 to 0.6 Ohm GTX Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Luxe XR DTL pod has a wider airway for a looser draw with more vapour. It accepts the 0.2 ohm GTX Dual Mesh (45-60W), 0.3 ohm (32-45W), 0.4 ohm (26-32W), and 0.6 ohm (20-30W) GTX coils. The 0.6 ohm coil also works well for restricted DTL (RDL) vaping. The 0.2 ohm coil needs 45W or more, so it only runs properly on the XR Max and XR Max 2.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-luxe-xr-pods-spec-2.webp?v=1772706665\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eReplaceable GTX Coils with Press-Fit Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGTX coils push into the base of the pod without threading or twisting. Pull the old coil out, drop the new one in, and press firmly until it clicks. Because you replace only the coil and not the pod, the XR system costs less to run over time than built-in coil pods. GTX coils are sold separately in packs of five.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2ml Capacity with Bottom-Fill Silicone Stopper\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pod holds 2ml of e-liquid under UK TPD regulations. The fill port is on the bottom, sealed with a silicone stopper that pulls out for refilling. The transparent PCTG body lets you check the e-liquid level without removing the pod from the device.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSSS Leak-Resistant Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVaporesso's SSS design uses three sealing points at the coil seat, fill stopper, and pod-to-device connection to keep e-liquid contained. This is particularly useful on replaceable coil pods, where the coil junction can be a weak point for leaks on other brands. Always check the coil is fully seated and the fill stopper is firmly closed after refilling.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-luxe-xr-pods-spec-3.webp?v=1772706665\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTransparent PCTG Construction with Magnetic Connection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pod is made from food-grade PCTG plastic that is durable and does not affect e-liquid flavour. It connects magnetically to the device for a secure fit and easy removal. The pod sits flush with the top of the device for a clean look.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible with All Seven Luxe X Family Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLuxe XR pods fit the following devices using the same magnetic connection:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Luxe X\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Luxe X2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Luxe X3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Luxe X Pro\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Luxe XR\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Luxe XR Max\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaporesso Luxe XR Max 2\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.4 ohm coil and above work on every device in the range. The 0.2 ohm coil needs 45W or more, so it suits only the XR Max and XR Max 2. Luxe XR pods are not compatible with XROS or Luxe Q devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eHow to Install Coils and Fill XR Pods\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress a new GTX coil into the base of the pod until it clicks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTurn the pod upside down and pull the silicone fill stopper out\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFill to just below the top of the port\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress the stopper firmly back in\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLeave for five minutes before your first vape so the cotton saturates\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Recommendations by Coil Resistance\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.2 to 0.4 ohm DTL coils:\u003c\/strong\u003e 70% VG or higher freebase e-liquid at 3mg or 6mg\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6 ohm RDL coil:\u003c\/strong\u003e 50\/50 or 60\/40 VG\/PG with freebase at 6mg or nic salts at 10mg\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.8 and 1.2 ohm MTL coils: \u003c\/strong\u003e50\/50 VG\/PG with nicotine salts at 10mg or 20mg\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eLuxe XR Pod Variants\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eLuxe XR Empty Pod - MTL\u003c\/strong\u003e (fits 0.8 and 1.2 ohm GTX coils) - 2 pack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eLuxe XR Empty Pod - DTL\u003c\/strong\u003e (fits 0.2, 0.3, 0.4, and 0.6 ohm GTX coils) - 2 pack\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2 x Vaporesso Luxe XR empty replacement pods (selected variant, no coil included)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGTX coils are sold separately and must be installed before use.\u003c\/span\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"MTL Pod","offer_id":40195771039818,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true},{"title":"RDL Pod","offer_id":40195771072586,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":false},{"title":"DTL\/XL","offer_id":40402057396298,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/vapeology-vaporesso-luxe-xr-replacement-pod-29811575750730.jpg?v=1671461175"},{"product_id":"aspire-gotek-x-2ml-replacement-pods-2","title":"Aspire Gotek Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Gotek Refillable Vape Pods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAspire Gotek replacement pods are the consumable element of the Gotek pod kit range. Each pod contains a built-in mesh coil that cannot be replaced separately; when the coil reaches the end of its life, the whole pod is swapped out. This is what some searchers mean when they look for \"Aspire Gotek coils\" or \"Gotek X coils\"; the pod is the coil on these devices. Pods are sold in packs of two, are side-fill via a silicone bung stopper, and are made from PCTG with a clear e-liquid window. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThey are available in 0.6Ω and 0.8Ω refillable options, and in a larger XL size for less frequent refilling. All refillable Gotek pods are compatible with the Gotek X II, Gotek Pro, and Gotek Nano. See the compatibility notes in each section below before purchasing if you have a Gotek X or Gotek S.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Gotek Replacement Pod Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold in packs of 2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in non-replaceable mesh coil, swap the whole pod when done\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePCTG construction with a clear e-liquid window\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSide-fill via silicone bung stopper, no tools or syringes needed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic connection to device\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAvailable in 0.6Ω (RDTL) and 0.8Ω (MTL) refillable options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eStandard 2ml capacity (UK TPD) or XL larger capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Gotek X II, Gotek Pro, Gotek Nano, Gotek X3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWorks best with nic salts, 50\/50, and high-PG e-liquids; avoid high-VG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePrime new pods for 5-10 minutes after first fill before vaping\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.8Ω Refillable Pod\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eResistance:\u003c\/strong\u003e 0.8Ω built-in mesh coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eCapacity: \u003c\/strong\u003e2ml (UK TPD)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eWattage range: \u003c\/strong\u003e13-16W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eDraw style:\u003c\/strong\u003e MTL (mouth-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eBest with: \u003c\/strong\u003enic salts, 50\/50, and high-PG freebase e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eCompatible with: \u003c\/strong\u003eGotek X, Gotek X II, Gotek X3, Gotek Pro, Gotek Nano, Gotek S\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.8Ω pod is the most widely compatible option in the Gotek range and is the pod included in the Gotek X kit. It delivers a tight, cigarette-like MTL draw with restrained vapour production, which makes it well suited to nic salts and 50\/50 e-liquids. It is the right choice if you are using the original Gotek X or Gotek S, as those devices do not support the 0.6Ω variant.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.6Ω Refillable Pod\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eResistance:\u003c\/strong\u003e 0.6Ω built-in mesh coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e: 2ml (UK TPD)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eWattage range: \u003c\/strong\u003e15-18W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eDraw style:\u003c\/strong\u003e RDTL (restricted direct-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eBest with:\u003c\/strong\u003e 50\/50, up to 70% VG blends, and nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eCompatible with: \u003c\/strong\u003eGotek X II, Gotek X3, Gotek Pro, Gotek Nano\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.6Ω pod gives a more open, warmer draw than the 0.8Ω and suits vapers who prefer a looser inhale or slightly more vapour. It is the pod supplied with the Gotek X II kit as standard. It requires a higher wattage than the 0.8Ω variant, which is why it is not compatible with the original Gotek X or Gotek S; those devices do not output enough power to fire it correctly. If you are using a Gotek X or Gotek S, use the 0.8Ω pod only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eXL Pods\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eAvailable in: \u003c\/strong\u003e0.6Ω and 0.8Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eCapacity: \u003c\/strong\u003elarger than the standard 2ml pod (verify UK-legal capacity with Vapeology before publishing)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eDraw and wattage:\u003c\/strong\u003e same as the equivalent standard resistance variant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eSame side-fill\u003c\/strong\u003e, magnetic connection, and PCTG construction as the standard pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eCompatible\u003c\/strong\u003e with the same devices as the equivalent standard resistance pod\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe XL pods hold significantly more e-liquid than the standard 2ml pod, which means fewer refills throughout the day. They suit vapers who find the standard pod runs out too quickly, or anyone who prefers to carry less e-liquid with them. The coil resistance, draw style, and e-liquid recommendations are the same as the matching standard variant. Replace the XL pod when flavour drops off or vapour production decreases, just as you would a standard pod.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDevice Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eGotek X II (X2):\u003c\/strong\u003e compatible with 0.6Ω, 0.8Ω, and XL variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eGotek Pro: \u003c\/strong\u003ecompatible with 0.6Ω, 0.8Ω, and XL variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eGotek Nano: \u003c\/strong\u003ecompatible with 0.6Ω, 0.8Ω, and XL variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eGotek X3:\u003c\/strong\u003e compatible with 0.6Ω, 0.8Ω, and XL variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eGotek X (original): \u003c\/strong\u003e0.8Ω only. The 0.6Ω pod will not fire correctly on this device due to its lower wattage output.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eGotek S:\u003c\/strong\u003e 0.8Ω only, for the same reason as the Gotek X.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid and Priming Guide\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll Gotek pods work best with nic salts, bar salts, 50\/50, or high-PG freebase e-liquids. High-VG liquids above 60-70% VG can cause the mesh coil to struggle, leading to dulled flavour and potential dry hits, so these are best avoided. When fitting a new pod for the first time, fill it, replace the bung, and leave it to sit for 5-10 minutes before vaping. This allows the e-liquid to fully saturate the cotton wicking material and prevents a burnt taste on the first few draws. Gotek pods typically last one to two weeks depending on vaping frequency and e-liquid type; sweeter bar salts and high-sugar e-liquids tend to shorten coil life faster than standard nic salts.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2 x Aspire Gotek pods in the chosen resistance and size\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.8 Ohm (XL)","offer_id":40344517476426,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm (2ml)","offer_id":53363935904130,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":false},{"title":"0.6 Ohm (XL)","offer_id":55052122882434,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/products\/aspire-coils-aspire-gotek-x-2ml-replacement-pods-pack-of-2-29953250295882.png?v=1677083832"},{"product_id":"oxva-xlim-v3-pod-3-pack","title":"OXVA Xlim V3 Top Fill Replacement Pods","description":"\u003ch2\u003eOXVA XLIM V3 Pods\u003c\/h2\u003e\n\u003cp\u003eThe \u003ca title=\"Browse our oxva vape range\" href=\"https:\/\/www.vapeology.co.uk\/collections\/oxva-vape-kits-pods\"\u003eOXVA\u003c\/a\u003e XLIM V3 Top Fill Replacement Pods are the latest refillable pods for the XLIM series, upgraded from the older V2 design with a new top-fill port that lets you refill without removing the pod from your device.\u003c\/p\u003e\n\u003cp\u003eThey are available in four resistance options (0.4 ohm, 0.6 ohm, 0.8 ohm, and 1.2 ohm) to suit both mouth-to-lung and restricted direct-to-lung vaping styles, and each pod features a built-in mesh coil, so there are no separate coils to buy or swap.\u003c\/p\u003e\n\u003cp\u003eYou can choose between the standard 2ml pods or the XL 3ml version for longer vaping between refills, with both sizes available in all four resistances.\u003c\/p\u003e\n\u003cp\u003eSold in packs of three, the XLIM V3 pods fit the full range of OXVA XLIM kits apart from the XLIM C. Whether you are replacing a worn pod on your XLIM Pro, XLIM SQ Pro 2, or any other device in the series, these are the standard replacement pods you need.\u003c\/p\u003e\n\u003ch2\u003eOXVA XLIM V3 Pods Key Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTop-fill design with silicone stopper\u003c\/li\u003e\n\u003cli\u003eBuilt-in mesh coils in 0.4, 0.6, 0.8, and 1.2 ohms\u003c\/li\u003e\n\u003cli\u003eAvailable in 2ml and 3ml XL capacity\u003c\/li\u003e\n\u003cli\u003eAnti-leak construction with UniTech 2.0 technology\u003c\/li\u003e\n\u003cli\u003ePCTG body with transparent viewing window\u003c\/li\u003e\n\u003cli\u003eMagnetic pod connection\u003c\/li\u003e\n\u003cli\u003eCompatible with all XLIM series kits (except XLIM C)\u003c\/li\u003e\n\u003cli\u003eWorks with \u003ca title=\"Browse our nic salt e-liquid range\" href=\"https:\/\/www.vapeology.co.uk\/collections\/nic-salts\"\u003enic salts\u003c\/a\u003e and freebase e-liquids\u003c\/li\u003e\n\u003cli\u003eNo coil changes required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTop-Fill Design with Silicone Stopper\u003c\/h3\u003e\n\u003cp\u003eThe V3 pods use a top-fill system that is a clear step up from the side-fill port on the older V2 pods. To refill, simply lift the silicone stopper on the top of the pod, add your e-liquid, and press the stopper back down. You do not need to remove the pod from your device to top up, which makes refilling quicker and less messy.\u003c\/p\u003e\n\u003cp\u003eThe sealed stopper helps prevent leaks, though it is worth pressing it firmly back into place after each fill to keep things airtight.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/oxva-v3-top-fill-vape-pods-spec-2.webp?v=1772618220\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBuilt-In Mesh Coils in Four Resistances\u003c\/h3\u003e\n\u003cp\u003eEach XLIM V3 pod has a fixed mesh coil built in, so when the coil reaches the end of its life, you simply replace the whole pod with a fresh one. The mesh design heats e-liquid quickly and evenly, producing a strong flavour from the first puff.\u003c\/p\u003e\n\u003cp\u003eFour resistance options are available: 0.4 ohm for a warmer restricted lung hit at 26 to 30W, 0.6 ohm for a balanced draw at 15 to 20W, 0.8 ohm for a smooth mouth-to-lung vape at 10 to 15W, and 1.2 ohm for a tight, cigarette-style pull at 8 to 12W.\u003c\/p\u003e\n\u003cp\u003eAll four resistances are available in both the 2ml and 3ml XL pod sizes. The 0.4 ohm pod supports a maximum output of 30W and is compatible with the XLIM Pro, XLIM SE 2 and XLIM SQ Pro kits.\u003c\/p\u003e\n\u003ch3\u003eAvailable in 2ml and 3ml XL Capacity\u003c\/h3\u003e\n\u003cp\u003eThe standard XLIM V3 pods hold 2ml of e-liquid, in line with UK TPD regulations. For vapers who want to go longer between refills, the XL version holds 3ml while using the same mesh coils, the same top-fill system, and the same magnetic connection.\u003c\/p\u003e\n\u003cp\u003eBoth sizes fit all compatible XLIM devices, so you can choose whichever suits your daily routine. The 3ml XL pods are particularly useful if you vape frequently throughout the day and prefer fewer interruptions to top up.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/oxva-v3-top-fill-vape-pods-spec-3.webp?v=1772618220\"\u003e\u003c\/p\u003e\n\u003ch3\u003eAnti-Leak Construction with UniTech 2.0 Technology\u003c\/h3\u003e\n\u003cp\u003eOXVA has improved the sealing on the V3 pods compared to earlier versions, incorporating their UniTech 2.0 coil technology. This features a five-layer cotton arrangement wrapped around the mesh coil for rapid e-liquid absorption and consistent wicking.\u003c\/p\u003e\n\u003cp\u003eThe top-fill silicone stopper and internal construction work together to keep e-liquid where it should be, reducing the risk of leaks into the device or out of the fill port. Making sure the stopper is fully seated after filling goes a long way towards keeping things clean.\u003c\/p\u003e\n\u003ch3\u003ePCTG Body with Transparent Viewing Window\u003c\/h3\u003e\n\u003cp\u003eThe pods are made from PCTG plastic, which is lightweight, durable, and food-safe. A transparent section on the side of the pod lets you see your e-liquid level at a glance, so you know when it is time to top up. Keeping the pod topped up is important because letting it run dry can burn the coil prematurely, shortening the life of the pod.\u003c\/p\u003e\n\u003ch3\u003eMagnetic Pod Connection\u003c\/h3\u003e\n\u003cp\u003eThe XLIM V3 pods attach to your device using magnets. They click into place securely and can be removed in a second when you need to swap to a different resistance or replace a used pod. The magnetic fit is firm enough that the pod will not come loose during normal use, even if you carry your device in a pocket or bag. Both the 2ml and 3ml XL pods use the same magnetic fitting, so switching between the two sizes is straightforward.\u003c\/p\u003e\n\u003ch3\u003eCompatible with All XLIM Series Kits (Except XLIM C)\u003c\/h3\u003e\n\u003cp\u003eOne of the best things about OXVA's XLIM range is the cross-compatibility between pods and devices. The V3 top fill pods work with the XLIM, XLIM SE, XLIM SE 2, XLIM SQ, XLIM SQ Pro, XLIM SQ Pro 2, XLIM Pro, XLIM Pro 2, XLIM Pro 2 DNA, XLIM Pro 3, XLIM Go, and XLIM Go 2. The only exception is the XLIM C, which uses a different pod fitting. If you own more than one XLIM device, the same pack of pods will work across all of them.\u003c\/p\u003e\n\u003ch3\u003eWorks with Nic Salts and Freebase E-Liquids\u003c\/h3\u003e\n\u003cp\u003eAll four resistance options handle both nicotine salt and freebase e-liquids well. A 50\/50 VG\/PG blend is recommended for the best wicking and flavour. The 0.8 ohm and 1.2 ohm pods pair particularly well with nic salts at 10mg or 20mg strength, while the 0.4 ohm and 0.6 ohm pods suit freebase liquids at lower nicotine strengths for a warmer, fuller draw.\u003c\/p\u003e\n\u003cp\u003eWhen using a new pod for the first time, fill it and let it stand for two to five minutes before vaping so the wick can fully saturate.\u003c\/p\u003e\n\u003ch3\u003eNo Coil Changes Required\u003c\/h3\u003e\n\u003cp\u003eBecause the coil is built into the pod, there is no need to buy or fit separate replacement coils. When you notice a drop in flavour, a burnt taste, or reduced vapour production, simply remove the old pod and click in a new one.\u003c\/p\u003e\n\u003cp\u003eThis makes the XLIM V3 pods a particularly straightforward option for newer vapers or anyone who prefers to keep things simple. Most users find a single pod lasts between one and two weeks of regular use, with some getting up to 20 refills before the flavour starts to fade.\u003c\/p\u003e\n\u003ch2\u003eOXVA XLIM V3 Pod Variants\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.4 ohm 2ml\u003c\/strong\u003e (restricted direct-to-lung, 26 to 30W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.4 ohm 3ml XL\u003c\/strong\u003e (restricted direct-to-lung, 26 to 30W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6 ohm 2ml\u003c\/strong\u003e (restricted direct-to-lung, 15 to 20W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.6 ohm 3ml XL\u003c\/strong\u003e (restricted direct-to-lung, 15 to 20W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8 ohm 2ml\u003c\/strong\u003e (mouth-to-lung, 10 to 15W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8 ohm 3ml XL\u003c\/strong\u003e (mouth-to-lung, 10 to 15W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.2 ohm 2ml\u003c\/strong\u003e (tight mouth-to-lung, 8 to 12W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.2 ohm 3ml XL\u003c\/strong\u003e (tight mouth-to-lung, 8 to 12W)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/oxva-v3-top-fill-vape-pods-spec-1.webp?v=1772618220\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3 x OXVA XLIM V3 Top Fill Replacement Pods (chosen resistance and capacity)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach pack contains three pods in your selected resistance and size. E-liquid is not included and will need to be purchased separately.\u003c\/p\u003e","brand":"Oxva","offers":[{"title":"0.4 Ohm","offer_id":40391359791178,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm","offer_id":40309560016970,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":false},{"title":"0.8 Ohm","offer_id":40311235444810,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":false},{"title":"1.2 Ohm","offer_id":40311235477578,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm XL","offer_id":56433145938306,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm XL","offer_id":56433145971074,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm XL","offer_id":56433146003842,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm XL","offer_id":56433146036610,"sku":null,"price":10.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/oxva-coils-oxva-xlim-v3-pod-pack-of-3-oxva-xlim-v3-pod-pack-of-3-vapeology-30045022126154.png?v=1682682730"},{"product_id":"lost-vape-ub-mini-coils","title":"Lost Vape UB Mini Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUB Mini Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Lost Vape UB Mini replacement coils are the standard coil range for the Orion Mini Pod Kit and the broader Ursa pod range, sold in packs of five. All variants use mesh heating elements and press-fit installation. The range is designed for MTL and restricted RDL vaping and is suited to nic salts and 50\/50 e-liquids. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe three most common variants are the S1 at 0.8Ω (12-17W), the S2 at 1.0Ω (9-13W), and the S3 at 0.6Ω (16-21W). These are lower-wattage coils intended for pod devices and are not the same as the UB Max or UB Lite coil ranges, which use a different format and fit different devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUB Mini Coil Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFive coils per pack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree main variants: S1 0.8Ω, S2 1.0Ω, S3 0.6Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAll mesh construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit coil installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMTL and restricted RDL vaping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSuited to nic salts and 50\/50 e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Orion Mini, Orion SE, Orion Art, Ursa range, and Thelema Go\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUB Mini S1 Coil, 0.8Ω, 12-17W\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe S1 is a 0.8Ω mesh coil designed for 12-17W. It is the mid-resistance option in the main UB Mini range, sitting between the S3 and S2 in terms of vapour warmth and output. The S1 gives a slightly airy RDL-to-MTL draw and works well with nic salts and 50\/50 e-liquids. Starting at the lower end of the wattage range when breaking in a new coil is recommended. The S1 was the original coil for the Orion Mini and remains one of the most widely used options in the range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUB Mini S2 Coil, 1.0Ω, 9-13W\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe S2 is a 1.0Ω mesh coil designed for 9-13W and is the closest to a cigarette-style MTL draw in the main UB Mini range. At these low wattages the vapour is cooler and more discreet, and the battery draw is minimal. The S2 is well suited to nic salts and to vapers who prefer a tight, restricted MTL draw. It is the most searched variant in the UB Mini range and a common choice for people switching from cigarettes or stepping down from a higher-nicotine device.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUB Mini S3 Coil, 0.6Ω, 16-21W\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe S3 is a 0.6Ω mesh coil designed for 16-21W. It runs at a higher wattage than the S1 and S2 and gives a slightly more open, warmer draw. The S3 is suited to vapers who want a bit more vapour production from their Orion Mini or Ursa device without going fully open. It works well with 50\/50 and nic salt e-liquids. The S3 is the newest addition to the main UB Mini range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe UB Mini coil range is compatible with the following Lost Vape devices:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOrion Mini\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOrion SE\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOrion Art\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUrsa Pro\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUrsa Nano Pro\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUrsa Baby Pro\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUrsa Nano S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUrsa Art\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThelema Go\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eURSA Empty Pod Cartridge\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eOrion Mini Empty Pod Cartridge\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe UB Mini coils are not compatible with the UB Max, UB Lite, or UB Pro coil ranges. Each of those uses a different coil format and fits different devices. If you own a Centaurus tank, you need UB Max coils. If you own a UB Lite Pod Kit or Thelema Mini, you need UB Lite coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eChoosing the Right UB Mini Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the tightest, most cigarette-like MTL draw, the S2 at 1.0Ω is the best option. For a slightly more open draw with a touch more warmth and vapour, the S1 at 0.8Ω is a good middle ground. If you want the most vapour the UB Mini range can produce and prefer a loose MTL to restricted draw, the S3 at 0.6Ω is the most capable option. All three work with nic salts and 50\/50 e-liquids. Higher-VG shortfills are not recommended for any UB Mini coil, as the thin wicking ports on these low-wattage coils are not suited to thick e-liquids.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x Lost Vape UB Mini replacement coils (S1, S2, or S3, depending on variant ordered)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lost Vape","offers":[{"title":"S1 0.8 Ohm","offer_id":40342097264714,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"S2 1.0 Ohm","offer_id":40336063922250,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/lost-vape-coils-1-0-ohm-lost-vape-ub-mini-s2-coil-30097086840906.jpg?v=1685701690"},{"product_id":"lost-vape-ub-max-coils-pack-of-3","title":"Lost Vape UB Max Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUB Max Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Lost Vape UB Max replacement coils are the standard coil range for the Centaurus Sub-Ohm Tank and UB Max Pod Tank, sold in packs of three. All three variants use mesh heating elements and press-fit installation. The range covers high-wattage DTL vaping, with options from 40W up to 120W depending on the coil you choose. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe X1 is a single mesh Ni80 coil at 0.15Ω for 80-120W, the X2 is a dual mesh Ni80 coil at 0.2Ω for 60-80W, and the X3 is a triple mesh KTR coil at 0.3Ω for 40-60W. All three are suited to 70%+ VG shortfill e-liquids. These are sub-ohm DTL coils and are not suitable for MTL vaping or nic salts.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eUB Max Coil Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree coils per pack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree variants: X1 0.15Ω, X2 0.2Ω, X3 0.3Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSingle, dual, and triple mesh options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNi80 wire (X1 and X2) and KTR\/Kanthal wire (X3)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit coil installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAll variants suited to 70%+ VG shortfill e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Centaurus Sub-Ohm Tank, UB Max Pod Tank, and Centaurus kit range\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUB Max X1 Coil, 0.15Ω, 80-120W\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe X1 is a single mesh coil built with Ni80 wire, rated at 0.15Ω and designed for 80-120W. It is the highest-wattage option in the UB Max range and produces the most vapour of the three. The wide, open airflow of the Centaurus tank suits the X1 well at full draw. At these wattages, 70-80%+ VG shortfill e-liquids are recommended; thinner 50\/50 liquids will not wick fast enough and will burn the coil. Start at around 80W when first installing a new X1 coil and work up once it is primed and broken in.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUB Max X2 Coil, 0.2Ω, 60-80W\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe X2 is a dual mesh coil using Ni80 wire, rated at 0.2Ω and best used at 60-80W. It sits between the X1 and X3 in terms of vapour output and warmth, making it a good all-round option if you want a warm, dense DTL vape without running the tank at full power. The dual mesh design heats quickly and evenly. Use 70%+ VG shortfill e-liquids. Start at 60W when breaking in a new coil, then adjust to taste.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eUB Max X3 Coil, 0.3Ω, 40-60W\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe X3 is a triple mesh coil built with KTR (Kanthal) wire, rated at 0.3Ω and designed for 40-60W. The triple mesh and Kanthal construction give a slightly cooler, more flavour-forward vape compared to the Ni80 options. At 40-60W it is the lowest-power coil in the range and the most efficient on battery. It is also the coil included in the Centaurus N100 kit. The X3 is well suited to vapers stepping up from a pod kit who want a DTL vape without going to very high wattages. Use 70%+ VG shortfill e-liquids.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe UB Max coil range is compatible with the following Lost Vape devices and tanks:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus Sub-Ohm Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus Sub Coo Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus Tank V2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eUB Max Pod Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus N100 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus N200 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus M100 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus M200 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus Q80 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus Q200 Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese coils are not compatible with the UB Lite, UB Pro, or other UB series coils. Each of those ranges uses a different coil format and the coils are not interchangeable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eChoosing the Right UB Max Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf your device can run at 80W or above and you want maximum vapour output, the X1 is the most capable option. If you want a balance of warmth, vapour, and battery life at mid-range wattage, the X2 is a good choice. If you prefer a cooler, flavour-focused DTL vape at lower wattages, or if your mod runs best between 40 and 60W, the X3 is the most practical pick. All three work with the same tanks and the same 70%+ VG shortfill e-liquids, so switching between them only requires a coil swap and a brief prime before use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3 x Lost Vape UB Max replacement coils (X1, X2, or X3, depending on variant ordered)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lost Vape","offers":[{"title":"X1 0.15 Ohm","offer_id":40340641185866,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"X2 0.2 Ohm","offer_id":40340641218634,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"X3 0.3 Ohm","offer_id":40340641251402,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/lost-vape-coils-lost-vape-ub-max-coils-pack-of-3-lost-vape-ub-max-coils-pack-of-3-vapeology-30093406175306.jpg?v=1685538791"},{"product_id":"aspire-cyber-tsx-replacement-pods","title":"Aspire Cyber TSX Replacement Pods (2 Pack)","description":"\u003ch2\u003eAspire Cyber TSX Replacement Pods\u003c\/h2\u003e\n\u003cp\u003eThe Aspire TSX replacement pod can hold a total of 2 millilitres of liquid and may be utilised in conjunction with either the Aspire Cyber X or the Aspire Cyber S vape starter kit. There are two separate pods that have built-in coils, but both of them will produce an MTL (mouth-to-lung) inhale along with a discrete amount of vapour that simulates the experience of smoking a cigarette. However, the pod with 0.8 Ohm resistance will produce somewhat more vapour than the one with 1.0 Ohm resistance.\u003c\/p\u003e\n\u003ch2\u003eAspire Cyber TSX Replacement Pods Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAspire TSX Pod\u003c\/li\u003e\n\u003cli\u003e2ml E-Liquid Capacity\u003c\/li\u003e\n\u003cli\u003eBuilt-In Mesh Coils\u003c\/li\u003e\n\u003cli\u003eMTL Vaping\u003c\/li\u003e\n\u003cli\u003eTop Filling\u003c\/li\u003e\n\u003cli\u003eSupports 50\/50 \u0026amp; High PG E-Liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause it has a side-filling mechanism, your Aspire TSX pod can be easily refilled whenever it runs low. Simply popping out a rubber stopper on the pod's side is all required to expose the opening for the e-liquid. After that, you can fill the tank with the e-liquid of your choosing, though we recommend either a 50\/50 or high PG blend for the best possible results. When inhaled, the e-liquid in each pod's coil has a mesh structure, which heats it more quickly and produces a more robust flavour.\u003c\/p\u003e\n\u003ch2\u003eAspire Cyber TSX Replacement Pods Contents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Aspire Cyber TSX Pods\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.8 Ohm","offer_id":40341307654218,"sku":null,"price":6.49,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm","offer_id":40341307686986,"sku":null,"price":6.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/aspire-coils-aspire-cyber-tsx-replacement-pods-2-pack-30097457610826.jpg?v=1685707991"},{"product_id":"geekvape-q-series-replacement-pods","title":"GeekVape Q Pod Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekVape Q Replacement Pods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GeekVape Q replacement pod cartridges are the refillable pods for the GeekVape Q series of devices, including the Sonder Q, Sonder Q2, Wenax Q, Wenax Q Mini, Wenax Q Pro, Wenax Q Ultra, Wenax Q2, Aegis Hero Q, Aegis Q (AQ), Digi Q, and Digi Q Vista. Each pod has a built-in integrated mesh coil, so there are no separate coils to buy or replace. When the flavour fades or the coil wears out, you replace the whole pod. Pods are sold in packs of three and are available in two designs, top-fill and side-fill, across four resistance options from 0.4Ω to 1.2Ω.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e the 0.4Ω pod is a side-fill pod and is only compatible with the Wenax Q Pro, Wenax Q Ultra, Wenax Q2, and Sonder Q2. It does not fit the original Wenax Q, Wenax Q Mini, Sonder Q, Sonder Q Lite, AQ, Aegis Hero Q, Digi Q, or Digi Q Vista. All other resistance options are compatible with the full Q series device range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eGeekVape Q Pod Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 3 pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in integrated mesh coil, no separate coil changes needed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo fill designs: top-fill and side-fill\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFour resistance options: 0.4Ω, 0.6Ω, 0.8Ω, and 1.2Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml capacity (UK TPD)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic connection to device\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMTL and restricted DTL vaping styles covered\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with nic salts and freebase e-liquid\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFits Sonder Q, Wenax Q, Digi Q, Aegis Hero Q and more\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePack of 3 Pods\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pack contains three replacement pods. Having spares on hand is useful because the coil is built into the pod, so when the coil is done, the whole pod needs replacing at once. Keeping a pack available means you are not caught without a working pod when the current one starts to taste burnt or loses flavour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt-In Integrated Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach Q pod has a mesh coil built directly into the pod body. There are no coils to buy separately and no coil-swapping process. This makes the Q pods straightforward to maintain, especially for people who are new to refillable pod systems. When the pod is new, allow it to sit for two to three minutes after filling before vaping to let the e-liquid fully saturate the cotton. This avoids dry hits on the first draw. Replace the pod when you notice a burnt taste or a significant drop in flavour or vapour production.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo Fill Designs: Top-Fill and Side-Fill\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Q pods are available in two versions depending on the fill system. The top-fill version has an opaque body and is refilled by snapping off the mouthpiece to expose the fill port, then snapping it back into place firmly when done. The side-fill version has a transparent body and is refilled via a hinged silicone tab on the side of the pod marked OPEN. Neither version needs to be removed from the device to refill. The side-fill version also lets you see the remaining e-liquid level through the clear pod body.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Resistance Options\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour resistance options cover the range from restricted direct-to-lung to extra tight MTL.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.4Ω\u003c\/strong\u003e pod runs at 25-30W for a restricted DTL draw with more vapour and a warmer inhale. Side-fill only. Compatible with Wenax Q Pro, Wenax Q Ultra, Wenax Q2, and Sonder Q2 exclusively. Best with 50\/50 or higher-VG e-liquid.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6Ω\u003c\/strong\u003e pod runs at 18-25W for a loose-to-mid MTL draw. Good balance of flavour and vapour. Best with 50\/50 freebase or nic salts up to 20mg.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.8Ω \u003c\/strong\u003epod runs at 12-18W for a standard MTL draw. The most widely used option across the Q range. Best with 50\/50 freebase or nic salts at 20mg.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.2Ω\u003c\/strong\u003e pod runs at 8-12W for a tight, cigarette-style MTL draw. Well suited to nic salts at 20mg and above in lower-wattage Q series devices.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2ml Capacity (UK TPD)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Q pods hold 2ml of e-liquid in the UK TPD version. Some listings outside the UK may reference a 3ml capacity for the side-fill version, which is the global variant. UK customers receive the 2ml TPD-compliant pod. The pod body is made from PCTG plastic, which is resistant to e-liquid and does not affect flavour.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMagnetic Connection to Device\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Q pod connects to the device via a magnetic seat at the base. It clicks into place securely and can be removed and reattached easily for refilling or swapping between pods. The magnetic connection is the same across all Q series devices, so any Q pod fits any compatible Q series kit regardless of whether it is a Sonder, Wenax, Digi, or Aegis model (subject to the resistance compatibility notes above).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible with Nic Salts and Freebase E-Liquid\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQ pods work with both nic salt and freebase e-liquid. For the 0.8Ω and 1.2Ω options, a 50\/50 VG\/PG blend or nic salt works well. The 0.6Ω pod suits 50\/50 or slightly higher-VG freebase and nic salts up to 20mg. The 0.4Ω pod is better suited to 50\/50 or higher-VG e-liquid given its higher wattage range. High-VG e-liquid above 70VG is not recommended for the 0.8Ω and 1.2Ω options as the wick may struggle to draw thicker e-liquid at lower wattages.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.6Ω, 0.8Ω, and 1.2Ω pods are compatible with the full GeekVape Q series device range.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Sonder Q\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Sonder Q Lite\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Sonder Q2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Wenax Q\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Wenax Q Mini\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Wenax Q Pro\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Wenax Q Ultra\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Wenax Q2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Aegis Hero Q\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Aegis Q (AQ)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Digi Q\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGeekVape Digi Q Vista\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.4Ω pod is only compatible with the Wenax Q Pro, Wenax Q Ultra, Wenax Q2, and Sonder Q2. It is not compatible with any other device in the list above.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3 x GeekVape Q replacement pod cartridges (resistance and fill type as selected\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Geekvape","offers":[{"title":"0.6 Ohm","offer_id":40346824409162,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm","offer_id":40346824441930,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm","offer_id":40346824474698,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/geekvape-coils-geekvape-q-series-replacement-pods-pack-of-3-30110664228938.webp?v=1686422050"},{"product_id":"uwell-valyrian-pod-coils","title":"Uwell Valyrian Pod Coils","description":"\u003ch2\u003eUwell Valyrian Pod Coils\u003c\/h2\u003e\n\u003cp\u003eUwell Valyrian Pod coils are compatible with both the Uwell Valyrian Pod Kit and the updated Uwell Valyrian SE Pod Kit. This coil has been designed with two distinct iterations to accommodate a variety of different vaping techniques. No matter which coil you go with, we strongly suggest using an e-liquid with at least 50% PG in it. \u003c\/p\u003e\n\u003ch2\u003eUwell Valyrian Pod Coils Feature:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUwell Valyrian Pod Kit Replacement Coils\u003c\/li\u003e\n\u003cli\u003eMTL \u0026amp; Restricted DTL Vaping\u003c\/li\u003e\n\u003cli\u003eCompatible With High PG E-Liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen using the 1.0 Ohm Valyrian pod coil for MTL vaping, a modest amount of vapour is produced, however, the 0.6 Ohm generates a bigger amount of vapour when using it for DTL vaping with restricted airflow. Because each coil has a dual construction, the ramp-up time is reduced, and the amount of flavour that is produced is boosted. \u003c\/p\u003e\n\u003ch2\u003eUwell Valyrian Pod Coils Contents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 x Uwell Valyrian Pod Coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Uwell","offers":[{"title":"0.6 Ohm","offer_id":40356788437066,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":false},{"title":"1.0 Ohm","offer_id":40356788469834,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/uwell-coils-uwell-valyrian-pod-coils-uwell-valyrian-pod-coils-vapeology-30125918355530.jpg?v=1687361471"},{"product_id":"aspire-bp-series-coils-5-pack","title":"Aspire BP Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire BP Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Aspire BP replacement coils are the coil series used across the BP range of devices, including the Onixx, BP60, BP80, Finixx, Nautilus Prime X, and Tekno. They come in a pack of five and are available in three variants suited to the Onixx and BP60: the 1.0Ω for MTL, the 0.6Ω for RDTL, and the 0.3Ω mesh for a warmer RDTL draw. All three use press-fit installation. The 1.0Ω and 0.6Ω are round wire coils, and the 0.3Ω is a mesh coil. If you own an Onixx kit, the 1.0Ω and 0.6Ω coils are the same ones that come included in the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire BP Coil Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFive coils per pack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree variants for the Onixx and BP60: 1.0Ω (10-16W), 0.6Ω (15-25W), and 0.3Ω mesh (30-40W)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation, no threading required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe 1.0Ω coil is designed for a tight MTL draw and works best with nic salts and 50\/50 e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe 0.6Ω coil is designed for a restricted direct-to-lung draw and works well with 50\/50 e-liquids or low-strength nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe 0.3Ω mesh coil is designed for a warm RDTL to DTL draw and is suited to 70%+ VG shortfill e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, Tekno, and Rhea X (variant-dependent, see Compatible Devices below)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e1.0Ω BP Coil, 10-16W, MTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 1.0Ω BP coil is rated for 10-16W and gives a tight, cigarette-like mouth-to-lung draw. It is one of the two coils included in the Onixx kit and is the recommended starting point for new vapers or anyone switching from smoking. At low wattages it draws very little power from the battery, which helps to extend the time between charges on the Onixx's 2000mAh battery. Use nic salts or 50\/50 freebase e-liquids for the best results. The 1.0Ω coil is compatible with the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, and Tekno.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.6Ω BP Coil, 15-25W, RDTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.6Ω BP coil is rated for 15-25W and produces a restricted direct-to-lung draw with more warmth and vapour than the 1.0Ω. It is the second coil included in the Onixx kit and is suited to vapers who want a draw that sits between a tight MTL and a full DTL. It works well with 50\/50 e-liquids, though the more open the airflow the better it performs with slightly higher-VG blends. The 0.6Ω is compatible with the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, and Tekno.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.3Ω BP Mesh Coil, 30-40W, RDTL\/DTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.3Ω BP mesh coil is rated for 30-40W and is the most open, warmest draw of the three Onixx-compatible variants. It is not included in the Onixx kit and is sold separately. The mesh construction heats more evenly than the wire coils and gives better vapour production at higher wattages. Use 70%+ VG shortfill e-liquids for best results. The 0.3Ω is compatible with the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, and Rhea X.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBP coil compatibility varies by variant. The table below shows which coils fit which devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe 1.0Ω and 0.6Ω fit the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, and Tekno.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe 0.3Ω mesh fits the Onixx Tank, BP60, BP80, Finixx, Nautilus Prime X, and Rhea X.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe 0.17Ω and 0.15Ω mesh variants fit the BP80, Finixx, and Huracan Tank but are NOT compatible with the Onixx Tank.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe 0.15Ω BP Pro mesh fits the BP80, Finixx, Rhea X, and Huracan Tank only.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThe 0.4Ω mesh is compatible with the BP80 and BP Stik but is NOT compatible with the Onixx Tank.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eIf you own an Onixx, stick to the 1.0Ω, 0.6Ω, or 0.3Ω mesh variants. The higher-wattage mesh coils designed for the BP80 and Huracan Tank will not fit the Onixx tank correctly.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5 x Aspire BP replacement coils (1.0Ω, 0.6Ω, or 0.3Ω mesh, depending on variant ordered)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"0.3 Ohm","offer_id":40406835298378,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm","offer_id":40406835331146,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm","offer_id":40406835363914,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.17","offer_id":40546901426250,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/aspire-coils-aspire-onixx-bp-series-coils-5-pack-30233914048586.webp?v=1694268608"},{"product_id":"vaporesso-eco-nano-pods-2pk","title":"Vaporesso Eco Nano Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso Eco Nano Pod Cartridge (2 Pack)\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/vaporesso\" title=\"Browse our vaporesso vape range \"\u003eVaporesso\u003c\/a\u003e Eco Nano replacement pods are refillable pod cartridges with a built-in mesh coil and a 2ml e-liquid capacity. Each pod uses Vaporesso's COREX heating technology and SSS leak-resistant design to deliver consistent flavour from the first fill to the last. Three resistance options are available: a 0.6Ω Lush Mesh pod for a loose, restricted draw, a 0.8Ω mesh pod for a slightly tighter RDL vape, and a 1.2Ω mesh pod for a traditional MTL draw. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll three work well with \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/freebase-50-50-vape-juice\" title=\"Browse our 50VG\/50PG vape juice range \"\u003e50VG\/50PG e-liquids\u003c\/a\u003e and \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/nic-salts\" title=\"Browse our nic salt e-liquid range \"\u003enicotine salts\u003c\/a\u003e. These pods are compatible with the Vaporesso Eco Nano, Eco Nano 2, \u003ca href=\"https:\/\/www.vapeology.co.uk\/products\/vaporesso-eco-nano-pro\" title=\"Shop for vaporesso eco nano pro pod vape kit \"\u003eEco Nano Pro\u003c\/a\u003e, and Eco Nano Plus. Sold in packs of two.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaporesso Eco Nano Pod Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml e-liquid capacity (UK TPD compliant)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in mesh coil with COREX heating technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree resistance options: 0.6Ω, 0.8Ω, and 1.2Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSSS (Seal, Saturate, Store) leak-resistant technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBottom fill system with silicone stopper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTransparent PCTG shell for e-liquid level visibility\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic pod connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with all Eco Nano devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold in 2-packs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-eco-nano-pods-spec-1.webp?v=1772703582\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThree Resistance Options for MTL and RDL Vaping\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Eco Nano pods come in three resistances, each suited to a different style of draw. The 1.2Ω mesh pod delivers a tight MTL (mouth to lung) inhale that closely mimics the feel of smoking a cigarette. It pairs well with higher-strength nicotine salt e-liquids. The 0.8Ω mesh pod offers a slightly looser draw that sits between MTL and restricted DTL, giving a touch more vapour while still keeping a comfortable throat hit. The 0.6Ω Lush Mesh pod is the loosest option, providing a restricted direct lung draw with noticeably more vapour production. All three resistances work with 50\/50 VG\/PG e-liquids, and all three are compatible with every device in the Eco Nano range.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-eco-nano-pods-spec-3.webp?v=1772703582\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt-In Mesh Coil with COREX Heating Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach Eco Nano pod has a built-in mesh coil that cannot be removed or replaced separately. When the coil wears out, you simply swap the entire pod for a fresh one. The 0.8Ω and 1.2Ω pods use Vaporesso's standard COREX heating technology, which features a morph-mesh structure that heats e-liquid more evenly across the surface area. The 0.6Ω Lush Mesh pod uses an upgraded version called COREX Smooth, which pairs a refined mesh structure with upgraded cotton wicking material for better e-liquid absorption and longer coil life. Vaporesso states that each pod can last up to 13,000 puffs depending on your e-liquid and vaping habits.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-eco-nano-pods-spec-2.webp?v=1772703582\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSSS Leak-Resistant Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll Eco Nano pods use Vaporesso's SSS (Seal, Saturate, Store) anti-leak system. This triple-seal design keeps e-liquid locked inside the pod and prevents condensation and leaking during normal use. Because the coil is sealed inside the pod rather than being a separate replaceable part, there are fewer gaps where e-liquid can escape. The result is a noticeably cleaner pod system with less mess around the connection point and inside the device.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBottom Fill System with Silicone Stopper\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTo refill an Eco Nano pod, pull back the silicone stopper on the base of the pod and insert your e-liquid nozzle through the rubber grommet inside the fill port. Close the stopper firmly once you have finished filling. After filling a new pod for the first time, leave it to stand for around five minutes so the coil cotton can fully absorb the e-liquid before you take your first draw. This prevents dry hits and helps the coil last longer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTransparent PCTG Shell\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Eco Nano pods are made from clear PCTG plastic, so you can see exactly how much e-liquid is left at a glance. The entire e-liquid reservoir sits above the body of the device when the pod is connected, making the level easy to check without removing the pod. This is a genuine practical advantage over pod systems that use tinted or opaque cartridges.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMagnetic Pod Connection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pods snap into the device using strong magnets and sit firmly in place with very little movement. You can insert the pod in either orientation, and the magnetic connection makes swapping between pods quick and tool-free. This is handy if you keep multiple pods filled with different flavours and want to switch throughout the day.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible with All Eco Nano Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEvery device in the Eco Nano range uses the same pod connection. These replacement pods fit the original Vaporesso Eco Nano, the Eco Nano 2, the Eco Nano Pro, and the Eco Nano Plus. There is no difference in how the pods connect across these kits. The Eco Nano 2 is the updated version of the original, while the Eco Nano Pro adds a screen and two power modes (Eco and Power). Whichever kit you own, all three pod resistances work with it.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003eEco Nano Pod Variants\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6Ω Lush Mesh Pod \u003c\/strong\u003e(COREX Smooth technology, RDL draw)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.8Ω Mesh Pod\u003c\/strong\u003e (COREX technology, RDL\/MTL draw)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.2Ω Mesh Pod \u003c\/strong\u003e(COREX technology, tight MTL draw)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2 x Vaporesso Eco Nano Replacement Pods (resistance as selected)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eE-liquid is not included. 50\/50 VG\/PG e-liquids and nicotine salts are recommended for use with all three pod resistances.\u003c\/span\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"0.8 Ohm","offer_id":40410345865290,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm","offer_id":40418185969738,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":false},{"title":"0.6 ohm Lush Mesh","offer_id":54855823982978,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-coils-vaporesso-eco-nano-pods-2pk-30251649466442.jpg?v=1695644349"},{"product_id":"caliburn-g3-replacement-pods","title":"Uwell Caliburn G3 Replacement Pods","description":"\u003ch1\u003eCaliburn G3 Replacement Pods\u003c\/h1\u003e\n\u003cp\u003eUwell Caliburn G3 Pods are refillable pods with fixed coils, and they come in a pack of four. The Caliburn G3 kit is the only device that is compatible with these pods.\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003eThese pods have a capacity of 2 millilitres (ml), and the feature top fill once you remove the mouth piece you can refill the pod through the red piece. Both 0.6 and 0.9 ohm resistance levels are offered for the refillable pods that come with the Caliburn G3 kit. The 0.6-ohm pod will provide an airy and warm RDL (restricted direct lung) vape, but the 0.9-ohm pod will generate a more restricted MTL (mouth to lung) draw that is comparable to the pull of a cigarette.\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Caliburn G3 pods make use of mesh coils built with Pro-FOCS technology to produce a cloud of vapour that is dense and full of flavour. These pods are compatible with e-liquids that have either a 50-50 freebase or a nic salt base.\u003c\/p\u003e\n\u003ch2\u003eUwell Caliburn G3 Contents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4x Caliburn G3 Pods\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Uwell","offers":[{"title":"0.6","offer_id":40425219620938,"sku":null,"price":11.95,"currency_code":"GBP","in_stock":false},{"title":"0.9","offer_id":40425219653706,"sku":null,"price":11.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/uwell-coils-uwell-caliburn-g3-replacement-pods-30274357526602.webp?v=1696680609"},{"product_id":"voopoo-pnp-x-empty-cartridge","title":"VOOPOO PnP X Replacement Pod Cartridges","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP X Empty Pod Cartridges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP X replacement pod cartridges are sold empty and are designed as spare or replacement shells for PnP X platform devices. Each cartridge accepts a PnP X coil, which is installed separately via the press-fit base, and is filled from the top before use. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo variants are available: an MTL cartridge for a tighter, mouth-to-lung draw and a DTL cartridge for a more open, direct-to-lung draw. Both are compatible with the Drag 5, Drag X3, Drag S3 and Vinci E120 device range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP X Replacement Pod Cartridges Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo variants: MTL cartridge and DTL cartridge\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold empty, coil not included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop-fill design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit base accepts PnP X coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with all VOOPOO PnP X platform devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNot compatible with original VOOPOO PnP coils or devices\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMTL Cartridge\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe MTL cartridge is designed for a tighter, mouth-to-lung draw and pairs with the PnP-X3 coil at 0.6 Ohm. It suits vapers using 50\/50 e-liquids and nicotine salts up to 35mg, and is the recommended option for anyone switching from smoking or preferring a more restrained inhale. The MTL cartridge restricts airflow compared to the DTL version, giving a draw closer to that of a cigarette.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDTL Cartridge\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe DTL cartridge is designed for a more open, direct-to-lung draw and pairs with the PnP-X1 (0.15 Ohm) or PnP-X2 (0.3 Ohm) coils. It suits vapers using high-VG shortfills or freebase nicotine at up to 10mg who prefer greater vapour volume. The wider airflow of the DTL cartridge is not well-suited to nicotine salts at higher strengths, as the larger lung inhale delivers nicotine more intensely.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-Fill Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth cartridges use a top-fill system. The fill port is accessed from the top of the pod rather than the base, which means the cartridge does not need to be removed from the device to refill. After filling, allow at least five minutes for the coil wick to saturate before vaping. This priming step is particularly important when fitting a new coil, as starting on an unsaturated wick risks a dry hit and shortens coil life.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePnP X Coil Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese cartridges are designed specifically for the PnP X coil platform and will not accept original PnP coils. PnP X coils are sold separately and press into the base of the cartridge without tools. The correct coil to pair with each cartridge depends on your preferred draw style: the PnP-X3 (0.6 Ohm) for MTL, the PnP-X2 (0.3 Ohm) for RDL, and the PnP-X1 (0.15 Ohm) for DTL. Coils are available separately on the VOOPOO PnP X coils page.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP X pod cartridges are compatible with any device on the PnP X platform. They are not compatible with older VOOPOO devices that use the original PnP coil platform. Compatible devices include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Drag 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Drag X3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Drag S3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Vinci E120\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAny other VOOPOO device specifying PnP X pod compatibility\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x VOOPOO PnP X pod cartridge (MTL or DTL variant)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voopoo","offers":[{"title":"Black DTL","offer_id":41219784310858,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":true},{"title":"Black MTL","offer_id":41219784343626,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":false},{"title":"Silver DTL","offer_id":41628926738506,"sku":null,"price":7.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-replacement-pods-black-dtl-voopoo-pnp-x-empty-cartridge-31232746061898.jpg?v=1715173269"},{"product_id":"oxva-oneo-cartridge","title":"OXVA Oneo Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eOXVA Oneo Cartridge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/oxva-vape-kits-pods\" title=\"Browse our oxva vape range \"\u003eOXVA\u003c\/a\u003e Oneo replacement pods are refillable cartridges designed for the \u003ca href=\"https:\/\/www.vapeology.co.uk\/products\/oxva-oneo-pod-kit\" title=\"Shop for oxva oneo pod kit \"\u003eOXVA Oneo pod kit\u003c\/a\u003e. Each pod holds 2ml of e-liquid (UK TPD compliant) and features a built-in mesh coil using OXVA's Unicoil technology for consistent flavour and vapour. Three resistance options are available: 0.4Ω for direct-to-lung vaping, 0.6Ω for restricted direct-to-lung, and 0.8Ω for mouth-to-lung. \u003cbr\u003e\u003cbr\u003eThe side-fill design with a silicone plug makes refilling quick and clean, and the transparent e-liquid window lets you check your level without removing the pod. Sold in packs of three, these pods work with both nic salt and freebase e-liquids.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eOXVA Oneo Cartridge Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in mesh coil with Unicoil technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml e-liquid capacity (UK TPD compliant)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree resistances: 0.4Ω, 0.6Ω and 0.8Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSide-fill system with silicone plug\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLeak-proof pod design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic pod connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePCTG pod construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTransparent e-liquid viewing window\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold in packs of 3\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/oxva-oneo-vape-pods-spec-1.webp?v=1772457653\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt-in Mesh Coil with Unicoil Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach Oneo pod uses OXVA's Unicoil technology, with a mesh coil built directly into the cartridge. The mesh heating element creates a wide, even contact area with your e-liquid, which improves flavour accuracy and produces smooth, consistent vapour. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBecause the coil is integrated, there are no separate coils to change. When the flavour starts to fade, or you notice a burnt taste, you simply replace the entire pod with a fresh one.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2ml E-Liquid Capacity\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe UK TPD-compliant version of the Oneo cartridge holds 2ml of e-liquid. A transparent window on the side of the pod lets you monitor your liquid level at any time without removing it from the device. The 2ml capacity pairs well with the coil's efficiency, giving you a good number of puffs between refills. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the best results, OXVA recommends using 50\/50 VG\/PG e-liquids with the 0.6Ω and 0.8Ω pods, and high VG (70\/30) e-liquids with the 0.4Ω pod.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThree Resistances: 0.4Ω, 0.6Ω and 0.8Ω\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.4Ω Oneo cartridge is built for direct-to-lung vaping and runs between 28W and 34W, producing warmer vapour with thicker clouds. The 0.6Ω option sits in the restricted direct-to-lung range at 20W to 26W, offering a balanced draw with good flavour. The 0.8Ω pod is designed for mouth-to-lung vaping at 14W to 18W, giving a tighter, more discreet draw that works particularly well with nic salt e-liquids. The Oneo device automatically detects which pod is installed and adjusts the wattage to match.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSide-Fill System with Silicone Plug\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRefilling the Oneo pod is done through a port on the side, sealed with a silicone plug. Slide the plug open, fill it with your chosen e-liquid, and press it back into place. The side-fill position keeps the process straightforward and reduces the risk of flooding the coil. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you are using a brand-new pod, let the e-liquid soak into the coil for a few minutes before you start vaping to avoid a dry hit on the first puff.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eLeak-Proof Pod Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Oneo cartridge continues the leak-proof design that OXVA's Unicoil series is known for. Internal seals around the coil and fill port prevent e-liquid from escaping through the base or airflow channel. The result is a pod that stays clean in your pocket or bag. Overfilling can still cause issues, so it is best to leave a small air gap at the top when refilling.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMagnetic Pod Connection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pod connects to the Oneo device using magnets, clicking securely into position. This makes swapping pods quick and tool-free. The magnetic alignment also ensures a solid electrical connection between the pod and the battery, so power delivery stays consistent. The Oneo device has a removable metal cover that sits over the pod once installed, adding an extra layer of protection and giving the kit a cleaner look.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePCTG Pod Construction\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pod body is made from PCTG, a food-grade plastic that is tough, lightweight, and resistant to cracking under everyday use. It handles the ingredients found in standard e-liquids without clouding or degrading over time. The semi-transparent finish gives a clear view of the liquid inside through the viewing window.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTransparent E-Liquid Viewing Window\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA clear window built into the side of each Oneo pod lets you see exactly how much e-liquid remains. On the Oneo device, two small cutouts in the metal cover line up with the pod window, so you can check your level without lifting the cap. This is a practical touch that helps you avoid running the pod dry, which can damage the coil and produce a burnt taste.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/oxva-oneo-vape-pods-spec-2.webp?v=1772457653\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSold in Packs of 3\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pack contains three Oneo pods of the same resistance. This gives you a ready supply of spares and good value compared to buying individual cartridges. If you are unsure which resistance suits your vaping style, the Oneo pod kit ships with a 0.4Ω and 0.8Ω pod included, so you can try both before buying a full pack.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eOXVA Oneo Pod Variants\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.4Ω\u003c\/strong\u003e (28-34W, DTL)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6Ω\u003c\/strong\u003e (20-26W, RDTL)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.8Ω\u003c\/strong\u003e (14-18W, MTL)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3x OXVA Oneo replacement pods (selected resistance)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese pods are designed for the OXVA Oneo pod kit only. They are not compatible with other OXVA devices, including the NeXlim, XLIM, or VPrime kits.\u003c\/span\u003e\u003c\/p\u003e","brand":"Oxva","offers":[{"title":"0.4 Ohm","offer_id":40792338530378,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm","offer_id":41557214363722,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm","offer_id":55161894044034,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/oxva-coils-0-4-ohm-oxva-oneo-cartridge-31125968552010.webp?v=1713867546"},{"product_id":"voopoo-argus-top-fill-pods","title":"VOOPOO Argus Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO Argus Top Fill Cartridge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe VOOPOO Argus top fill cartridge is the official replacement pod for the VOOPOO Argus range of vape kits, sold in a convenient pack of three. Each pod holds 2ml of e-liquid in line with UK TPD regulations and features a top-fill port covered by a silicone stopper, making refills quick and tidy whether you are at home or out and about. The pods come with a built-in mesh coil, so there is no separate coil to install or replace. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAvailable in three resistance options, these Argus vape pods cover both mouth-to-lung and restricted direct-to-lung vaping styles. The magnetic connection snaps the pod securely into any compatible Argus device, and the PCTG construction keeps the body lightweight and durable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO Argus Pods Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml e-liquid capacity (TPD compliant)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop-fill silicone stopper port\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in mesh coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree resistance options: 0.4 Ohm, 0.7 Ohm, 1.0 Ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic pod connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMulti-layer leak-proof design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePCTG pod material\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e4-hole symmetrical airflow inlet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with the full VOOPOO Argus kit range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWorks with nic salt and 50\/50 freebase e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2ml E-Liquid Capacity\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach VOOPOO Argus pod holds 2ml of e-liquid, the maximum permitted under UK TPD regulations. The transparent PCTG body makes it easy to check your liquid level at a glance, so you will not be caught short mid-day. At typical usage, most vapers find a single pod lasts one to two weeks before flavour quality begins to drop and a fresh one is needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-Fill Silicone Stopper Port\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe top-fill design on these Argus top fill pods puts the fill port on the uppermost face of the cartridge, covered by a firm silicone stopper. Press the stopper aside, insert your bottle nozzle, fill to the 2ml line, and press it back into place. You do not need to remove the pod from the device to refill, which makes the whole process noticeably faster. This is one of the reasons the Argus top fill cartridge has become the preferred choice over older side-fill designs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt-In Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRather than using a separate replaceable coil, each of these Argus pods has the coil built directly into the cartridge body. The mesh construction heats e-liquid across a wide surface area, producing consistent vapour and clear flavour from the first draw. When the coil reaches the end of its life, you simply swap out the entire pod rather than handling a loose coil. This approach keeps maintenance straightforward and avoids the dry hits that can occur when a traditional coil is close to burning out.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eThree Resistance Options: 0.4 Ohm, 0.7 Ohm, 1.0 Ohm\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChoose the resistance that suits your vaping style:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e0.4 Ohm\u003c\/strong\u003e\u003cspan\u003e - Restricted direct-to-lung (RDTL) vaping. Best run at 18 to 30W. Produces more vapour and a warmer draw. Not compatible with the Argus P1 or Argus Z.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e0.7 Ohm\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e- The most versatile option. Mouth-to-lung vaping at 14 to 18W. A good all-round choice for everyday use.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003e1.0 Ohm\u003c\/strong\u003e\u003cspan\u003e - Tight mouth-to-lung draw at 10 to 14W. Pairs well with higher-strength nic salts and suits vapers transitioning from cigarettes.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMagnetic Pod Connection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll VOOPOO Argus pods attach to the device via a built-in magnetic connection, meaning the pod drops into place without any alignment fiddling or pressing. The magnet holds the pod firmly during use, preventing it from working loose in a pocket or bag. Removing the pod for refilling or swapping is equally straightforward: pull it away from the device with a light tug and it comes free cleanly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMulti-Layer Leak-Proof Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO's ARGUS top fill cartridge uses a multi-layer construction around the coil chamber and fill port to reduce the chance of e-liquid seeping out during normal use. The silicone stopper on the top-fill port forms a firm seal once pressed back into place. Keeping the pod upright when not in use and avoiding overfilling beyond the 2ml mark will help maintain the seal over the life of the cartridge.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePCTG Pod Material\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pod body is made from PCTG, a food-safe plastic that is both impact-resistant and resistant to discolouration from e-liquids over time. PCTG is commonly used in vape pods because it holds its structure well, does not react with PG or VG-based e-liquids, and stays clear so the liquid level remains visible. The lightweight nature of the material also means the pod adds very little weight to your device when fitted.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e4-Hole Symmetrical Airflow Inlet\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe base of each Argus refill pod features four evenly spaced airflow inlets arranged symmetrically around the coil. This arrangement distributes incoming air evenly across the coil surface, which promotes consistent vapour production and reduces the likelihood of one-sided hotspots. The balanced airflow also contributes to a smoother draw that stays consistent from a full pod right through to the last few millilitres of e-liquid.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWide Argus Kit Compatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese replacement pods are compatible with the following VOOPOO Argus kits:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus G\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus G2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus G2 Mini\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus G3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus G3 Mini\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus P1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus P1s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus P2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus P3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus Z\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus Z2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus Klyc\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus Matrix\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eArgus A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.4 Ohm pod is not compatible with the Argus P1 or Argus Z. All other resistances work across every kit listed above.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-argus-pods-spec-1.webp?v=1772797097\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWorks with Nic Salt and 50\/50 Freebase E-Liquids\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO recommends using these Argus pods with e-liquids that have a 50% PG ratio or higher, which includes most nic salt 10ml bottles and standard 50\/50 freebase liquids. Thinner, higher-PG liquids wick through the coil more efficiently and help the mesh coil stay saturated between puffs. High-VG shortfills, which are thicker in consistency, are not recommended as they can struggle to wick fast enough and may shorten coil life. For vapers switching from disposables or transitioning from cigarettes, 20mg nic salt paired with the 0.7 Ohm or 1.0 Ohm pod gives a close, satisfying draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3 x VOOPOO Argus Top Fill Replacement Pods (with built-in coil)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pod arrives ready to fill. Allow five minutes after filling before vaping to ensure the coil is fully saturated.\u003c\/span\u003e\u003c\/p\u003e","brand":"Voopoo","offers":[{"title":"0.4 Ohm","offer_id":41135551021130,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"0.7 Ohm","offer_id":41135551053898,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-coils-0-4-ohm-voopoo-argus-top-fill-pods-31118165901386.jpg?v=1713785647"},{"product_id":"elf-bar-elf-x-replacement-pods","title":"Elf Bar ELFX Replacement Pods 3 Pack","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eELFX Pods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Elf Bar ELFX replacement pods - also referred to as Elf X pods or ElfX pods - are the refillable pods for the ELFX and ELFX Pro pod kits. Each pack contains three 2ml pods with Elf Bar's QUAQ dual mesh coils built in, so there is no separate coil to buy or swap out; when the flavour starts to fade, you replace the whole pod. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTwo resistance options are available: 0.6ohm for a more open RDL draw and 0.8ohm for a tighter MTL draw. The pods are compatible with 50\/50 nic salts and freebase e-liquids and are particularly well-suited to Elf Bar's own ElfLiq nic salt range.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 3 pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml capacity, TPD-compliant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eQUAQ dual mesh coil, integrated\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e0.6ohm - RDL, 25W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e0.8ohm - MTL, 17W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic pod connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSilicone-plugged fill port\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e4-layer anti-leak design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with ELFX and ELFX Pro kits\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eNo Separate Coil Required\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe QUAQ dual mesh coil is integrated directly into the pod body - it is not a removable or replaceable component. This means there is no separate ELFX coil to buy. When flavour starts dropping off, the whole pod is swapped out. This is by design: the pod-coil unit is a single sealed piece, which simplifies maintenance and eliminates dry-hit risk from improper coil installation. A pack of three pods gives you two or three pod changes depending on use before you need to reorder.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eQUAQ Dual Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth the 0.6ohm and 0.8ohm pods use Elf Bar's QUAQ dual mesh heating element. Two layers of mesh give a larger total surface area than a single mesh coil, which means the e-liquid heats more evenly across the wick. Elf Bar's in-house testing puts flavour consistency above 97% over the lifespan of the pod. The dual mesh also runs at lower temperatures than a single wire coil would need to produce the same vapour output, which protects the e-liquid from overheating and keeps the flavour cleaner for longer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eResistance Options\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.6ohm pod is tuned for RDL vaping at 25W. The draw is more open and the vapour output higher than the 0.8ohm option, making it better suited to higher-VG liquids and vapers who prefer something closer to a sub ohm experience in a compact kit. The 0.8ohm pod runs at 17W and produces a tighter, more restrained draw suited to MTL use with nic salts and 50\/50 e-liquids. Both pods are made from PCTG, which is transparent, so you can check the e-liquid level without removing the pod from the device.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eRefilling\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pod has a silicone-plugged fill port. Open the plug, fill to the 2ml mark, and reseal it firmly before vaping. After filling, wait around five minutes before your first draw to allow the wick to saturate fully - skipping this risks a dry hit that will burn the coil and shorten the pod's life. Do not overfill. The 4-layer anti-leak design includes a 360-degree sealing ring and an absorbent polymer layer to contain any minor overfill, but the silicone plug must be fully closed for this to work correctly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese pods fit the Elf Bar ELFX kit and the ELFX Pro kit, connecting magnetically. They are not compatible with the ELFX Mega kit - that device uses its own ELFX Mega pods, which have a different form factor and the added QUAQ DURA technology. If you are unsure which device you have, check the name printed on the device body. Both ELFX and ELFX Pro take these standard pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3 x Elf Bar ELFX Replacement Pods (choose 0.6ohm or 0.8ohm)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elf Bar UK","offers":[{"title":"0.6 Ohm","offer_id":41361589829706,"sku":null,"price":9.88,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm","offer_id":41361589862474,"sku":null,"price":9.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/elf-bar-uk-coils-elf-bar-elf-x-replacement-pods-30987527225418.webp?v=1712571546"},{"product_id":"lost-vape-e-plus-replacement-pods","title":"Lost Vape E Plus Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eLost Vape E Plus Pods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Lost Vape E Plus replacement pods are the refillable pod cartridges for Lost Vape's E40 and Thelema Elite device range. Each pod has a built-in dual mesh coil, so there are no separate coils to fit or replace. When the coil is spent, you swap the whole pod. They are sold in packs of three and have a 2ml capacity in line with UK TPD regulations. Three resistance options are available to suit different vaping styles: 0.3Ω for a DTL vape, 0.45Ω for a DTL vape at lower wattage, and 0.6Ω for MTL. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pods use a side-fill system with a silicone plug, and the transparent pod body makes it straightforward to check your e-liquid level. These pods are compatible with the Thelema Elite 40, Thelema Elite Art 40, Thelema Elite S, Thelema Nano, Centaurus E40, Centaurus E40 Max, and Centaurus E40 Ultra.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eE Plus Pod Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 3 pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml capacity (UK TPD)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in dual mesh coil, no separate coil fitting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree resistance options: 0.3Ω, 0.45Ω, 0.6Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSide-fill with silicone plug\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTransparent pod body\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e5-layer leak-proof construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Thelema Elite 40, Thelema Elite Art 40, Thelema Elite S, Thelema Nano, Centaurus E40, Centaurus E40 Max, Centaurus E40 Ultra\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.3Ω Pod (DTL, up to 40W)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.3Ω E Plus pod is a single mesh coil designed for a direct-to-lung vape at up to 40W. This is the most open draw of the three options and produces the largest amount of vapour. It is best paired with a high-VG shortfill e-liquid of 70% VG or above. Nic salts are not recommended at this resistance due to the volume of vapour produced and the potential for an uncomfortably high nicotine hit. The 0.3Ω pod displays its correct resistance on the device screen as it uses a single coil rather than dual mesh.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.45Ω Pod (DTL, up to 30W)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.45Ω E Plus pod is a dual mesh coil running up to 30W, sitting between the 0.3Ω and 0.6Ω options in terms of wattage and vapour output. It delivers a DTL vape with a slightly tighter draw than the 0.3Ω. A high-VG shortfill of 70% VG or above is recommended. As a dual mesh pod, the device screen will display the resistance as 0.9Ω rather than 0.45Ω. This is normal and does not affect performance. The 0.45Ω pod is the newest addition to the E Plus range and is the variant most vapers using the Thelema Elite S and Thelema Nano will find most suitable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.6Ω Pod (MTL\/RDTL, up to 22W)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.6Ω E Plus pod is a dual mesh coil running up to 22W, suited to mouth-to-lung and restricted DTL vaping. It produces noticeably less vapour than the 0.3Ω or 0.45Ω options and works well with nic salts and 50\/50 e-liquids. The 0.6Ω pod is the right choice for vapers who prefer a tighter draw or who are using higher nicotine strengths. As a dual mesh pod, the device screen will show the resistance as 1.2Ω rather than 0.6Ω. This is expected behaviour, not a device fault.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSide-Fill System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll three E Plus pod variants use the same side-fill design. A silicone plug on the side of the pod pulls out to reveal the fill port. Fill with e-liquid, replace the plug, and leave the pod for a minute or two to allow the mesh coil to absorb the liquid before vaping. The transparent pod body means you can see when the pod is running low without needing to remove it from the device. When replacing a new pod, allow it to sit filled for a few minutes before firing to avoid a dry hit on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe E Plus pods are compatible with the following Lost Vape devices:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThelema Elite 40\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThelema Elite Art 40\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThelema Elite S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThelema Nano\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus E40\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus E40 Max\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCentaurus E40 Ultra\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pods are the same replacement part whether you are searching by the Thelema Elite name or the Centaurus E40 name, as both device families use the same pod format. The E Plus pod is not compatible with other Lost Vape pod systems such as the Orion or Lyra ranges.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3 x Lost Vape E Plus replacement pods (choose 0.3Ω, 0.45Ω, or 0.6Ω)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lost Vape","offers":[{"title":"0.3","offer_id":41143165616202,"sku":null,"price":11.88,"currency_code":"GBP","in_stock":true},{"title":"0.6","offer_id":41143165648970,"sku":null,"price":11.88,"currency_code":"GBP","in_stock":true},{"title":"0.8","offer_id":55506537480578,"sku":null,"price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/lost-vape-coils-lost-vape-e-plus-replacement-pods-31007196938314.webp?v=1712742186"},{"product_id":"vaperz-cloud-vc-tech-coils","title":"Vaperz Cloud VC Tech Replacement Coils 4 Pack","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVaperz Cloud VC Tech Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Vaperz Cloud VC Tech coils are a set of premium mesh replacement coils built around a combination of wood pulp cotton and Vaperz Cloud's own VC mesh strips. The wood pulp cotton is slower to break down than standard cotton and holds its flavour longer, which means you get more life out of each coil before the burnt note sets in. T\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ehe honeycomb airflow pattern inside the coil accelerates air through the mesh, which gives a notably clean and fast flavour hit compared to standard coil construction. Four resistance options cover the full range from tight MTL at 0.8Ω up to cloud-chasing DTL at 0.15Ω, and the coils are press-fit so installation is straightforward. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThey are primarily designed for the Vaperz Cloud Shift Boro Tank, but because they use the same format as \u003ca href=\"https:\/\/www.vapeology.co.uk\/products\/voopoo-pnp-coils\" title=\"Shop for voopoo pnp vape coils \"\u003eVoopoo PnP\u003c\/a\u003e and \u003ca href=\"https:\/\/www.vapeology.co.uk\/products\/vaporesso-gtx-coils-pack-of-5\" title=\"Shop for vaporesso gtx vape coils\"\u003eVaporesso GTX coils\u003c\/a\u003e, they fit a wide range of popular sub-ohm tanks and AIOs. Each pack contains four coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVC Tech Coil Variants\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.15Ω VC Tech Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe highest-output option in the VC Tech range, built for full DTL (direct-to-lung) vaping with maximum vapour production. The 0.15Ω coil fires at 55-65W and needs a high-VG e-liquid - shortfills at 60-70% VG or higher. At this resistance you get the densest clouds and the most vapour-driven flavour of the four variants, comparable to building your own coil on a rebuildable deck. The draw is fully open and unrestricted. Requires a regulated mod capable of sub-ohm firing and batteries rated for the current draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.15Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage range: 55-65W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: DTL (direct-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: high-VG shortfill, 60-70%+ VG\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.2Ω VC Tech Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStill a sub-ohm DTL coil but with a slightly tighter draw and lower wattage requirement than the 0.15Ω. The 0.2Ω fires at 45-55W and is a good middle-ground option for vapers who want strong vapour and flavour without pushing their mod to its upper limits. High-VG e-liquid is still required. This is often the most popular variant in the VC Tech range because it delivers the rebuildable-quality flavour the coil is known for while remaining accessible to a wider range of mods and batteries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.2Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage range: 45-55W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: DTL (direct-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: high-VG shortfill, 60–70%+ VG\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.4Ω VC Tech Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.4Ω coil sits in RDL (restricted direct-to-lung) territory - more airflow than a traditional MTL draw but not as wide open as the lower-resistance DTL options. It fires at 35–45W. At this resistance you can use 50\/50 e-liquids, nic salts or freebase shortfills. This is the most versatile coil in the range and suits vapers who want strong flavour without the full cloud output of the 0.15Ω or 0.2Ω options. It is also the lowest power sub-ohm variant, making it the safest step down from standard wattage vaping if you are new to higher-output coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.4Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage range: 35-45W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: RDL (restricted direct-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: 50\/50 or nic salt; high-VG shortfills also fine\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.8Ω VC Tech Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe only above-ohm option in the range and the one designed for MTL (mouth-to-lung) vaping. The 0.8Ω fires at 10-20W, which puts it well within the output range of most pod mods and lower-wattage regulated devices. The draw is cigarette-tight and the vapour output is discreet. At this resistance you can use 50\/50 e-liquids or nic salts, and the wood pulp cotton construction still gives the flavour quality the range is built on. If you are using nic salts at 10-20mg, this is the most appropriate coil in the VC Tech lineup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistance: 0.8Ω\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWattage range: 10-20W\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDraw style: MTL (mouth-to-lung)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid: 50\/50 or nic salt, 10–20mg\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe VC Tech coils are designed primarily for the Vaperz Cloud Shift Boro Tank but use the same press-fit format as Voopoo PnP and Vaporesso GTX coils, which gives them broad compatibility across a wide range of popular devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaperz Cloud Shift Boro Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaperz Cloud VC Tech Tank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaperz Cloud SAN AIO\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVaperz Cloud Pixel AIO\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSuicide Mods Tallboy Stubby Tank (Tech Mesh version)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAny device compatible with Voopoo PnP coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAny device compatible with Vaporesso GTX coils\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf you are unsure whether your device accepts PnP or GTX coils, check the original coil packaging or the device manual. If it does, the VC Tech coils will fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePriming Your Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBefore using a new VC Tech coil, prime it properly or the wood pulp cotton will dry-burn on first use, producing a harsh burnt taste that can be difficult to fully recover from. Press the coil into the tank, add a few drops of e-liquid directly onto the exposed cotton through the top of the coil, fill the tank or pod, and wait at least 5-10 minutes before firing. This gives the cotton time to fully saturate. Start at the lower end of the wattage range and work up – this is especially important with the 0.15Ω and 0.2Ω variants where the wattage range is high.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSub-ohm coils (0.15Ω, 0.2Ω and 0.4Ω) require a regulated mod and batteries with appropriate continuous discharge ratings. Do not use these coils in unregulated or hybrid mechanical mods unless you have the technical knowledge to do so safely.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e4 x Vaperz Cloud VC Tech coils (one resistance per pack – select your variant above)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vaperz Cloud","offers":[{"title":"0.15 Ohm","offer_id":41530780352586,"sku":null,"price":12.88,"currency_code":"GBP","in_stock":false},{"title":"0.2 Ohm","offer_id":41530780385354,"sku":null,"price":12.88,"currency_code":"GBP","in_stock":false},{"title":"0.4 Ohm","offer_id":41101637222474,"sku":null,"price":12.88,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm","offer_id":41530780418122,"sku":null,"price":12.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaperz-cloud-coils-vaperz-cloud-vc-tech-coils-31074922070090.webp?v=1713358327"},{"product_id":"voopoo-pnp-x-coils","title":"VOOPOO PnP X Replacement Coils","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP X Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP X replacement coils are the updated coil platform used across VOOPOO's more recent device range, sold in packs of five. The range covers mouth-to-lung, restricted direct-to-lung and full direct-to-lung vaping, with resistances spanning 0.15 Ohm to 0.6 Ohm. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePnP X coils use the same plug-and-play press-fit fitting as the original PnP platform but are a different size internally and are not interchangeable with standard PnP coils. If your device is from the Drag 5, Drag X3, Drag S3 or Vinci E120 range, it takes PnP X coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO PnP X Replacement Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 5 coils per pack\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree variants: PnP-X1, PnP-X2, PnP-X3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eResistances: 0.15 Ohm, 0.3 Ohm and 0.6 Ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCovers DTL, RDL and MTL draw styles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMesh heating element on all variants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePlug-and-play press-fit installation, no tools needed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with all VOOPOO PnP X platform devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eNot compatible with original VOOPOO PnP coils or pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMatch coil wattage range to your device before ordering\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-pnp-x-replacement-coils-spec-1.webp?v=1772799062\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePnP-X1: 0.15 Ohm DTL Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe PnP-X1 is the highest-power option in the PnP X range, running at 0.15 Ohm with a recommended wattage of 40 to 60W. It is designed for a fully open direct-to-lung draw and requires high-VG shortfills or freebase nicotine at no more than 10mg. This is the coil to choose if you prefer dense vapour output and strong flavour from a shortfill on a high-powered PnP X device.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePnP-X2: 0.3 Ohm RDL Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe PnP-X2 runs at 0.3 Ohm with a recommended wattage of 25 to 35W, making it the mid-range option in the PnP X lineup. The draw sits between a tight MTL and a full DTL: often called restricted direct-to-lung or RDL. It suits 60\/40 or 70\/30 e-liquids and freebase nicotine at up to 10mg, and works well on mid-powered PnP X devices. Vapers moving from a pod kit towards sub-ohm vaping often find the RDL draw a comfortable step up.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePnP-X3: 0.6 Ohm MTL Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe PnP-X3 is the MTL option in the range, running at 0.6 Ohm with a recommended wattage of 12 to 25W. It produces a tighter, more cigarette-like draw and is well-suited to 50\/50 e-liquids and nicotine salts up to 35mg. This is the recommended starting point for vapers switching from smoking who want a familiar inhale style. It also works on lower-powered PnP X devices that cannot reach the wattage required by the X1 or X2.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-pnp-x-replacement-coils-spec-2.webp?v=1772799062\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMTL, RDL and DTL: Choosing the Right Draw Style\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMTL (mouth-to-lung) means drawing vapour into the mouth first, then inhaling, the same way most people smoke a cigarette. DTL (direct-to-lung) means inhaling vapour directly into the lungs in one breath, which requires an open airflow and higher wattage. RDL (restricted direct-to-lung) sits between the two: more airflow than MTL but less wide open than a full DTL draw. For vapers switching from smoking, MTL is the closest match. For vapers who have already moved on from MTL and want more vapour, RDL or DTL is the next step. The PnP-X3 covers MTL, the PnP-X2 covers RDL, and the PnP-X1 covers DTL.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMesh Heating Element\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll three PnP X variants use a mesh heating element rather than a round-wire construction. Mesh covers a larger surface area, heats more evenly and produces consistent flavour from the first draw through to the end of the coil's life. Heat-up time is faster than a round-wire equivalent at the same wattage, and the design is more resistant to dry hits during normal use. Sweetened e-liquids and dessert flavours containing sucralose will shorten coil life on any mesh coil, so pairing PnP X coils with quality, low-sucralose e-liquids will extend how long each coil lasts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-pnp-x-replacement-coils-spec-3.webp?v=1772799062\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePlug-and-Play Press-Fit Installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePnP X coils press directly into the base of any PnP X compatible pod or tank: no threading, no screwing and no tools required. Removing a spent coil is done by pushing it out from the opposite end. Before first use, fit the coil, fill the pod or tank, and allow at least five minutes for the wick to saturate fully before vaping. Starting at the lower end of the coil's wattage range and increasing gradually helps avoid a dry hit on the first draw and extends the coil's working life.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePnP X coils are compatible with any VOOPOO device built on the PnP X platform. Always confirm your device uses PnP X coils before ordering, as the original PnP platform uses a different coil that will not fit PnP X pods or tanks. Compatible devices include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Drag 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Drag X3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Drag S3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVOOPOO Vinci E120\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAny other VOOPOO device specifying PnP X coil compatibility\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-pnp-x-replacement-coils-spec-4.webp?v=1772799063\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePnP X Coils Are Not Compatible with Original PnP Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePnP X is a newer, physically different coil platform and cannot be used with original PnP pods, tanks or devices. Both platforms use a press-fit fitting but differ in internal dimensions. If your device is an older model such as the Drag S, Drag X, Argus Pro or Vinci 2, it uses original PnP coils. If you are unsure which platform your device uses, check the coil type listed in the user manual or on the original packaging before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Pack\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e5 x VOOPOO PnP X coils (one variant per pack)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSelect your variant at the top of the page before adding to basket. Coils are not included with any PnP X pod or tank and must be purchased separately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Voopoo","offers":[{"title":"0.15 DTL","offer_id":41135584215114,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":true},{"title":"0.2 DTL","offer_id":41135584247882,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":true},{"title":"0.3 RDL-MTL","offer_id":41135584280650,"sku":null,"price":13.88,"currency_code":"GBP","in_stock":true},{"title":"0.6 RDL-MTL","offer_id":41135584313418,"sku":"","price":13.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-coils-0-3-rdl-mtl-voopoo-pnp-x-coils-31118230716490.jpg?v=1713786373"},{"product_id":"innokin-vcap-replacement-pod","title":"Innokin VCAP Replacement Pod","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin VCAP Pod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Innokin VCAP replacement pod is a refillable 2ml pod cartridge with a built-in mesh coil, designed for use with the Innokin Trine, Trine SE, Endura V, Endura V Box, and Endura V Pro kits. Rather than swapping out a separate coil, you replace the whole pod when the coil is spent - quick, clean, and no cotton-touching required. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pods are available in four resistances to suit different vaping styles, from a wide-open 0.4ohm direct-to-lung option right through to a tighter 1.2ohm mouth-to-lung pod. All four variants share the same 2ml capacity and top-fill design, and each is colour-coded so you can tell them apart at a glance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eInnokin VCAP Pod Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml e-liquid capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in mesh coil - replace the pod, not just the coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTop-fill design, accessed by removing the mouthpiece\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFour resistances: 0.4ohm, 0.6ohm, 0.8ohm, and 1.2ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eColour-coded by resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTransparent pod body to monitor fill level\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eIntelligent pod recognition on compatible devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSuits MTL, RDTL, and DTL vaping styles depending on variant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with nic salt and 50\/50 freebase e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePod Variants\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour resistances are available, each colour-coded and suited to a different vaping style. Note that the 0.4ohm variant is not compatible with the original Innokin Trine - see the Compatibility section below for full details.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.4ohm Mesh (Red)\u003c\/strong\u003e - 25 to 30W, direct-to-lung (DTL)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6ohm Mesh (Orange)\u003c\/strong\u003e - 20 to 22W, loose RDTL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.8ohm Mesh (Blue)\u003c\/strong\u003e - 12 to 14W, loose-to-medium RDTL\/MTL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.2ohm Mesh (Green)\u003c\/strong\u003e - 11 to 12W, tighter MTL\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTop-Fill Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTo refill a VCAP pod, simply pull the mouthpiece off the top of the pod - it exposes the fill port directly underneath. Fill with your chosen e-liquid, replace the mouthpiece, and you're done. There's no need to remove the pod from the device to refill, and the design is leak-resistant when the mouthpiece is seated correctly. The transparent body means you can see the fill level at a glance without having to pull the pod out to check.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt-In Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach VCAP pod has a mesh coil built into the pod body, so there's no separate coil to source, prime, or install. When the coil reaches the end of its life - you'll notice a drop in flavour or a slightly burnt taste - you swap the whole pod for a new one. All compatible Innokin devices include intelligent pod recognition, which automatically detects the resistance of the installed pod and adjusts the output accordingly, so there's nothing to set manually.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVCAP pods are compatible with the following Innokin devices. The 0.4ohm pod works with all kits listed except the original Trine - if you use a Trine (not Trine SE), stick to the 0.6ohm, 0.8ohm, or 1.2ohm variants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eInnokin Trine\u003c\/strong\u003e - 0.6ohm, 0.8ohm, and 1.2ohm only\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eInnokin Trine SE\u003c\/strong\u003e - all four resistances\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eInnokin Endura V\u003c\/strong\u003e - all four resistances\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eInnokin Endura V Box\u003c\/strong\u003e - all four resistances\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003eInnokin Endura V Pro\u003c\/strong\u003e - all four resistances\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid Guide\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInnokin recommends 50\/50 (PG\/VG) e-liquids with VCAP pods, which includes most nic salts and standard freebase 10ml bottles. Thicker high-VG liquids are not advised as they can affect wicking performance in these pods. For the tighter-drawing 0.8ohm and 1.2ohm variants, nic salts at 10mg or 20mg work particularly well. The 0.6ohm and 0.4ohm variants suit freebase e-liquids if you prefer a more open draw, though nic salts can still be used at lower strengths.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Innokin VCAP Replacement Pod (resistance of choice)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Innokin","offers":[{"title":"0.6ohm","offer_id":41152768540746,"sku":null,"price":3.44,"currency_code":"GBP","in_stock":true},{"title":"0.8ohm","offer_id":41152768507978,"sku":null,"price":3.44,"currency_code":"GBP","in_stock":true},{"title":"1.2ohm","offer_id":41152768475210,"sku":null,"price":3.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/innokin-coils-innokin-vcap-replacement-pod-31132740091978.webp?v=1713952327"},{"product_id":"minikin-pod-replacement-coils","title":"Asmodus Minikin Pod Replacement Coils 3 Pack","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAsmodus Minikin Pod Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese are the replacement coils for the Asmodus Minikin 50W Pod Kit - a mesh coil pod system that handles both RDL and MTL vaping depending on which resistance you fit. The coils come in two options: a 0.3ohm mesh coil for restricted direct lung vaping at 40-45W with high-VG or freebase e-liquids, and a 0.8ohm mesh coil for mouth-to-lung vaping at 12-16W with 50\/50 or nic salt e-liquids. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pack contains 3 coils and they install with a simple press-fit - no tools, no threading. Also referred to as Minikin Pod System coils, Minikin AIO pod coils, and Asmodus Minikin coils.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAsmodus Minikin Coils Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo resistance options: 0.3ohm mesh or 0.8ohm mesh\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePack of 3 coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePress-fit installation - no threading required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e0.3ohm rated 40-45W - suited to RDL vaping with high-VG or freebase e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e0.8ohm rated 12-16W - suited to MTL vaping with 50\/50 or nic salt e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with the Asmodus Minikin 50W Pod Kit and Minikin replacement pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGenuine Asmodus replacement coils\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.3ohm Mesh Coil - RDL Vaping\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.3ohm coil is the sub-ohm option in the Minikin range. It runs at 40-45W and delivers a warm, open draw with plenty of vapour - the kind of vape you would expect from a restricted direct lung setup. It works best with high-VG shortfill e-liquids or freebase 3mg liquids where the higher wattage and airflow suit the thicker consistency of a VG-dominant mix. If you are coming from a sub-ohm tank setup and want something more compact without giving up the cloud and warmth, this is the coil for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e0.8ohm Mesh Coil - MTL Vaping\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.8ohm coil is built for a tighter, more restricted draw at 12-16W - the MTL experience the Minikin was also designed to cover. At this wattage range the vapour is cooler, the draw is tighter, and the focus shifts to flavour rather than cloud. It works well with 50\/50 e-liquids and nicotine salt blends, both of which wick reliably through a mesh coil at this wattage. If you are using the Minikin as your everyday MTL device or transitioning from a pod kit that uses prefilled pods, this is the coil to fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePress-Fit Installation and Priming\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth Minikin coils use a press-fit design, meaning you push the coil into the pod base until it clicks into place rather than screwing it in. Before you vape on a fresh coil, add e-liquid to the pod, fit the coil, and leave it to sit for a few minutes so the wick can saturate fully. This is especially important with the 0.3ohm coil at higher wattages - a dry hit on a fresh unprimed coil will burn the cotton and shorten the coil's life significantly. Once primed, fire at a lower wattage first and build up to your preferred setting over the first few puffs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e3 x Asmodus Minikin replacement coils (available in 0.3ohm or 0.8ohm)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Asmodus Minikin 50W Pod Kit and Minikin replacement pods are available separately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Asmodus","offers":[{"title":"0.3ohm","offer_id":41223773749322,"sku":null,"price":9.44,"currency_code":"GBP","in_stock":true},{"title":"0.8ohm","offer_id":41223773782090,"sku":null,"price":9.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/asmodus-coils-0-3ohm-asmodus-minikin-pod-replacement-coils-31277186744394.jpg?v=1715765286"},{"product_id":"asmodus-minkin-pod-cartridge","title":"Asmodus Minikin Replacement Pod","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAsmodus Minikin Pod\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Asmodus Minikin replacement pod is the refillable pod cartridge for the Minikin Pod System kit. It holds 2ml of e-liquid in line with UK TPD regulations, is made from PCTG, and connects to the device via a magnetic click. The pod does not come with a coil installed - you push in whichever Minikin Pod coil suits your vaping style, whether that is the 0.8ohm for MTL, the 0.3ohm for sub-ohm, or any other resistance in the Minikin coil range. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe hidden side fill port opens with an upward push and closes back down to seal the liquid in, and the airflow is adjusted on the pod itself via a sliding switch that goes from fully closed through to wide open. Each pod includes both an MTL and an RDL drip tip.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAsmodus Minikin Replacement Pod Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml capacity - UK TPD-compliant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePCTG construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHidden slide fill port - push up to open, close to seal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePlug-to-install coil fitting - no threading, push to fit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAdjustable airflow switch on the pod\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic connection to Minikin device\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMTL drip tip included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRDL drip tip included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold as a single pod\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCoils not included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFill System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe fill port is set into the side of the pod behind a sliding cover. Push the cover upward and the port is exposed; fill your liquid in, then push the cover back down to close and seal it. There is no separate plug or cap to lose. The port itself has a leak-proof membrane so you can fill confidently without it weeping back out. When fitting a new coil, fill the pod and leave it for around five minutes before vaping to let the e-liquid fully saturate the coil - skipping this step is the most common cause of a burnt taste on the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCoil Compatibility and Fitting\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMinikin Pod coils are plug-to-install, meaning you push them into the base of the pod until they sit snugly - no screwing, no threading. The range covers MTL through to DTL: the 0.8ohm coil is designed for a tighter mouth-to-lung draw and works best with higher-PG e-liquids or nic salts, while the 0.3ohm coil is for sub-ohm vaping and handles a thicker, higher-VG liquid better. The coils are sold separately as the Asmodus Minikin Pod Replacement Coils. If you are unsure which resistance to go for, the kit you are using will suggest a wattage range for each coil.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eAirflow\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe airflow adjustment is a sliding switch on the body of the pod, not on the device itself. This means you can tune the draw without changing any settings on the mod. At the closed end it shuts off airflow entirely, which is useful for priming a new coil before you start vaping. Open it progressively for a looser draw. The range is wide enough to cover both a tight MTL pull and a more open RDL draw depending on the coil fitted.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDrip Tips\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pod ships with two drip tips: a narrow-bore MTL tip and a wider-bore RDL tip. Both are removable and interchangeable, so you can switch between them depending on which coil and airflow setting you are using. A narrower tip gives a more concentrated, mouth-to-lung draw; the wider tip opens up the vapour path to suit the looser airflow needed for RDL vaping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Asmodus Minikin replacement pod (empty, coils not included)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x MTL drip tip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x RDL drip tip\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Asmodus","offers":[{"title":"Amber XL","offer_id":54862047216002,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true},{"title":"Black XL","offer_id":54862047248770,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true},{"title":"Blue XL","offer_id":54862047281538,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":false},{"title":"Green XL","offer_id":54862047314306,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/asmodus-empty-replacement-pods-asmodus-minkin-pod-cartridge-31277884637258.jpg?v=1715772308"},{"product_id":"aspire-flexus-pro-replacement-pods","title":"Aspire Flexus Pro Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Flexus Pro Pods and Coils\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Aspire Flexus Pro uses two different types of replacement pod, and both are available here. The first is the Flexus Pro pod cartridge, which has a mesh coil built in and is replaced as a whole unit when the coil wears out. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe second is the Flexus Pro empty pod, which accepts Aspire AF press-fit mesh coils so the pod itself can be reused and only the coil is swapped. Both types hold 2ml of e-liquid, fill from a side port with a silicone stopper, and attach to the Flexus Pro device via a magnetic connection. The pod cartridges come in a pack of two; the empty pod is sold individually.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eAspire Flexus Pro Pods Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo pod types available: built-in coil cartridge (pack of 2) and empty pod for AF coils (single)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml capacity (UK TPD), PCTG material\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSide-fill with silicone stopper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic connection to device\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in coil pods: 0.6Ω (15-18W, RDTL) or 1.0Ω (12-15W, MTL)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eEmpty pod: accepts AF mesh coils in 0.6Ω, 1.0Ω, or 0.4Ω (20-28W)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAll pods suit 50\/50 e-liquids and nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with Flexus Pro only; not compatible with Flexus Q, Flexus Stik, or Flexus AIO\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eWhich Pod Type Should I Choose?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe built-in coil cartridge is the simpler option. You fill it, vape it through several refills until the flavour drops off or a burnt note appears, then remove it and drop in a fresh pod. There are no coils to source separately, no installation steps, and less to think about. It suits vapers who want a clean, low-maintenance experience. The empty pod with replaceable AF coils is more economical over time, since you only replace the coil and keep the pod. It also gives you access to the 0.4Ω coil option, which the built-in cartridge does not offer. If you are comfortable changing coils and want more flexibility or lower ongoing cost, the empty pod is the better choice.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt-in Coil Pod Cartridges: 0.6Ω and 1.0Ω\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pod cartridges come with the coil already fitted and cannot be modified. Both use mesh coil construction and are sold in a pack of two.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6Ω\u003c\/strong\u003e, 15-18W, RDTL, more vapour, similar draw to a disposable vape, suits 50\/50 up to 70% VG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.0Ω\u003c\/strong\u003e, 12-15W, MTL, tighter and cooler draw closer to a cigarette, suits 50\/50 or high-PG e-liquids and nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eEmpty Pod with Replaceable AF Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe empty Flexus Pro pod is the same physical shell as the cartridge but ships without a coil installed. Press fit an Aspire AF mesh coil into the base before use, then swap the coil when needed while reusing the same pod body. Sold as a single unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.4Ω AF Mesh coil\u003c\/strong\u003e, 20-28W, airier RDTL, suits 70%+ VG e-liquids\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6Ω AF Mesh coil\u003c\/strong\u003e, 15-18W, RDTL, suits 50\/50 up to 70% VG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e1.0Ω AF Mesh coil\u003c\/strong\u003e, 12-15W, MTL, suits 50\/50 or high-PG e-liquids and nic salts\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAF coils are available separately on our Aspire AF coils page. Most vapers keep two or three empty pods in rotation so one is always primed and ready.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFilling and Priming\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth pod types fill the same way. Remove the pod from the device, locate the silicone stopper on the side, pull it out, fill slowly until the e-liquid reaches the top of the fill port, then replace the stopper firmly. Before vaping a new pod or a freshly fitted coil, leave it to sit for two to three minutes to allow the cotton to fully saturate. Vaping a dry or under-primed coil is the most common cause of early coil failure and a burnt taste that can persist even after the cotton has wicked properly. For the empty pod, adding a few drops of e-liquid directly onto the exposed cotton before pressing the coil into the pod gives an extra margin.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatibility Note\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBoth Flexus Pro pod types are designed specifically for the Aspire Flexus Pro device. They are not compatible with the Aspire Flexus Q, Flexus Stik, or Flexus AIO, even though those kits also use AF coils and share a similar pod form factor. The pod connection geometry and airflow path differ between these devices. If you own a Flexus AIO, Flexus Q, or Flexus Stik, you need the pod specific to your device. See our individual pod pages for each of those kits.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBuilt-in coil pod cartridges:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2 x Aspire Flexus Pro pod cartridges with built-in mesh coil (0.6Ω or 1.0Ω, depending on variant selected)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEmpty pod (replaceable coil version):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e1 x Aspire Flexus Pro empty pod\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAF mesh coils are not included with the empty pod and are available separately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"Empty Pod 1 PK","offer_id":41404402696266,"sku":null,"price":3.49,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm","offer_id":41404402630730,"sku":null,"price":6.49,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm","offer_id":41404402663498,"sku":null,"price":6.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/aspire-coils-0-6-ohm-aspire-flexus-pro-replacement-pods-31542714531914.jpg?v=1718797026"},{"product_id":"voopoo-argus-e40-replacement-pods","title":"VOOPOO Argus E40 Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO Argus E40 Pod Cartridges\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese are the official replacement pod cartridges for the VOOPOO Argus E40 pod kit. Each cartridge holds 2ml of e-liquid in line with UK TPD regulations and comes with a built-in PnP X coil that is not separately replaceable. Three resistance options are available, covering RDL and DTL vaping styles at different wattage ranges. The pods connect to the Argus E40 device via strong magnets and sit securely with no wobble once attached. They are sold in packs of 2 and are made from PCTG and PC, giving them a lightly tinted appearance that allows you to monitor your e-liquid level without removing the cartridge from the device.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese pod cartridges are only compatible with the VOOPOO Argus E40. They will not fit the Argus P1, P2, G, G2, G2 Mini, Z2 or Argus Air.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO Argus E40 Pod Cartridges Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in PnP X mesh coil\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml e-liquid capacity (TPD)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eThree resistance options: 0.3 ohm, 0.45 ohm and 0.6 ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSide-filling design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFour-layer leak-resistant construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePCTG and PC material with lightly tinted body\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMagnetic connection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRated for up to 100ml of e-liquid per cartridge\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSold in packs of 2\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt-In PnP X Mesh Coil\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach Argus E40 cartridge comes with a built-in PnP X coil that uses a vertical honeycomb mesh heating element combined with thermo-stable cotton wicking. This design heats the e-liquid evenly across the full surface of the mesh, which produces consistent flavour and reduces the risk of dry hits or hotspots. The coil is integrated into the cartridge body and cannot be removed or replaced independently. When the coil is spent, the whole cartridge is replaced. VOOPOO rate these coils to last up to 100ml of e-liquid before performance noticeably drops.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2ml E-Liquid Capacity\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach cartridge holds 2ml of e-liquid, which is the standard capacity for refillable pods sold in the UK under TPD regulations. The lightly tinted body means you can check your e-liquid level at a glance without needing to remove the pod from the device. When the tank runs low, remove the cartridge from the Argus E40 and refill via the side-filling port before reattaching.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSide-Filling Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRefilling is handled through a rubber hatch on the side of the cartridge, near the base. To fill, remove the pod from the device, pull back the rubber hatch to reveal the fill port, add your e-liquid, and close the hatch firmly before reinserting the pod. The fill port is large enough to accept most e-liquid bottle nozzles without difficulty. Before vaping after a fresh fill, allow the pod to rest for a minute or two so the coil wicks fully, which helps protect the coil and ensures the best flavour from the first draw.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour-Layer Leak-Resistant Construction\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe internal structure of the Argus E40 cartridge uses a four-layer leak-resistant design that seals the coil chamber and prevents e-liquid from migrating out of the pod during use or when stored. This means the pods are reliable to carry in a pocket or bag throughout the day. The combination of sealed construction and the Argus E40's side-filling port further reduces the opportunity for leaks compared to bottom-fill designs.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMagnetic Connection\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe pod attaches to the Argus E40 device using four magnets that provide a strong, rattle-free connection. The magnets are powerful enough that the pod is drawn firmly into position as it approaches the connection point, and there is no play or wobble once seated. To remove the cartridge for refilling, pull it directly away from the device with a firm but straight tug.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e100ml Coil Lifespan\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVOOPOO state that the PnP X coils inside these cartridges are designed to last up to 100ml of e-liquid before the flavour begins to degrade or the risk of leaking increases. In practice, lifespan will vary depending on the wattage you vape at and the VG ratio of your e-liquid, with higher wattages and thicker liquids placing more demand on the coil. Keeping the pod topped up rather than running it dry will also help extend coil life and maintain flavour quality throughout the pod's use.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003eArgus E40 Pod Cartridge Options\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.3 ohm\u003c\/strong\u003e (RDL and DTL, 32-40W, high-VG e-liquids)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.45 ohm \u003c\/strong\u003e(RDL, 26-32W, 50\/50 or high-VG e-liquids)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6 ohm \u003c\/strong\u003e(RDTL, 18-23W, 50\/50 freebase or nicotine salts)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-argus-e40-pods-spec-1.webp?v=1772796384\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e2 x VOOPOO Argus E40 pod cartridges (your chosen resistance)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Voopoo","offers":[{"title":"0.3 Ohm","offer_id":41439778930762,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true},{"title":"0.45 Ohm","offer_id":41439778963530,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":false},{"title":"0.6 Ohm","offer_id":41439778996298,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":false},{"title":"Empty Pod","offer_id":41439779029066,"sku":null,"price":5.99,"currency_code":"GBP","in_stock":false},{"title":"0.45 Ohm XL","offer_id":55102638293378,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm XL","offer_id":55102638326146,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/voopoo-coils-0-6-ohm-voopoo-argus-e40-replacement-pods-31622527746122.jpg?v=1726256407"},{"product_id":"vaporesso-luxe-x-corex-2-0-pods","title":"Vaporesso Luxe X COREX 2.0 Replacement Pods","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eLuxe X COREX 2.0 Mesh Pods\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/vaporesso\" title=\"Browse our vaporesso vape range \"\u003eVaporesso\u003c\/a\u003e Luxe X COREX 2.0 pods are refillable replacement pods with built-in mesh coils, available in four resistances from 0.3 to 0.8 ohm. They use upgraded COREX 2.0 heating technology with improved Morph Mesh and COREX Cotton for longer coil life and more consistent flavour than the original Luxe X pods. The 0.3 and 0.4 ohm pods come with a wider mouthpiece for DTL and RDL vaping, while the 0.6 and 0.8 ohm pods have a thinner, redesigned mouthpiece shaped for MTL and restricted DTL draws. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pod holds 2ml of \u003ca href=\"https:\/\/www.vapeology.co.uk\/collections\/e-liquids\" title=\"Browse our vape e-liquid range \"\u003ee-liquid\u003c\/a\u003e, fills from the bottom through a silicone stopper, and uses SSS leak-resistant technology. Compatible with the Luxe X, Luxe X2, Luxe X Pro, Luxe XR, Luxe XR Max, and \u003ca href=\"https:\/\/www.vapeology.co.uk\/products\/vaporesso-luxe-xr-max-2-pod-kit\" title=\"Buy vaporesso luxe xr max 2 vape kit\"\u003eLuxe XR Max 2\u003c\/a\u003e. Sold in packs of two.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eLuxe X COREX 2.0 Pod Key Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFour resistances: 0.3, 0.4, 0.6, and 0.8 ohm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCOREX 2.0 heating technology with upgraded Morph Mesh\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo mouthpiece styles: wide for DTL, slim for MTL\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2ml capacity with bottom-fill silicone stopper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eSSS leak-resistant technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBuilt-in mesh coils with plug-and-play pod swap\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCompatible with all Luxe X series devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCOREX 2.0 vs original COREX pods\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCOREX 2.0 pods vs Luxe XR pods with GTX coils\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eE-liquid and nicotine recommendations by resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Resistances: 0.3, 0.4, 0.6, and 0.8 Ohm\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe COREX 2.0 range covers DTL, RDL, and MTL vaping styles across four resistances. The 0.3 ohm pod (32 to 45W) is the lowest resistance option for full DTL vaping with large clouds and warm vapour. The 0.4 ohm pod (26 to 32W) sits between DTL and RDL for a slightly more relaxed draw with strong flavour. The 0.6 ohm pod (20 to 30W) is suited to RDL vaping with a moderate draw and good flavour clarity. The 0.8 ohm pod (12 to 20W) is designed for MTL vaping with the tightest draw in the range, closest to a cigarette-style pull.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-luxe-x-corex-2.0-pods-spec-2.webp?v=1772705922\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCOREX 2.0 Heating Technology with Upgraded Morph Mesh\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCOREX 2.0 is Vaporesso's updated pod coil technology, featuring an improved Morph Mesh heating element and upgraded COREX Cotton wicking. The Morph Mesh structure heats e-liquid more evenly across the coil surface for better flavour accuracy from the first puff to the last. The improved COREX Cotton absorbs e-liquid faster and holds more of it against the mesh, which reduces the chance of dry hits and helps each pod last longer before the flavour starts to drop off. Vaporesso pairs COREX 2.0 with the AXON chipset in compatible devices for consistent power output throughout the life of the pod.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-luxe-x-corex-2.0-pods-spec-1.webp?v=1772705922\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo Mouthpiece Styles: Wide for DTL, Slim for MTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.3 and 0.4 ohm pods use a wider mouthpiece that allows more air to pass through, matching the open draw needed for DTL vaping. The 0.6 and 0.8 ohm pods have a thinner, narrower mouthpiece that Vaporesso redesigned specifically for the COREX 2.0 range. This slimmer profile sits more comfortably against the lips and restricts airflow naturally, which improves the feel of MTL and restricted DTL draws. The mouthpiece is built into each pod, so the correct style is always matched to the resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-luxe-x-corex-2.0-pods-spec-3.webp?v=1772705922\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2ml Capacity with Bottom-Fill Silicone Stopper\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pod holds 2ml of e-liquid (UK TPD compliant) and fills from the bottom through a silicone stopper. Remove the pod from your device, pull out the stopper, insert your bottle nozzle, and fill to just below the top of the port. Push the stopper back in firmly before refitting the pod. Take care not to overfill, as this can cause e-liquid to leak from the fill port when the stopper is replaced. The pods are made from transparent PCTG plastic, so you can check your e-liquid level at a glance without removing the pod.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSSS Leak-Resistant Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVaporesso's SSS (Seal, Saturate, Store) technology uses three sealing points within the pod to keep e-liquid locked inside. The system maintains consistent internal pressure and prevents leaking through the fill port, airflow channels, and mouthpiece. While no pod is completely leak-proof, the SSS design significantly reduces mess during filling and day-to-day use. Storing the device upright when not in use further helps to keep e-liquid away from the airflow path.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt-In Mesh Coils with Plug-and-Play Pod Swap\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe coil is built into each COREX 2.0 pod and cannot be replaced separately. When the flavour drops off or you notice a burnt taste, swap the entire pod for a new one. This keeps maintenance simple: there is no coil to unscrew or install. Before your first vape on a new pod, fill it with e-liquid and leave it to soak for around five minutes so the wicking material can fully saturate. Starting at the lower end of the recommended wattage range for the first few draws helps the coil bed in and last longer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible with All Luxe X Series Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Luxe X COREX 2.0 pods use the same magnetic connection as every device in the Luxe X family. They fit the Luxe X, Luxe X2, Luxe X Pro, Luxe XR, Luxe XR Max, and Luxe XR Max 2. However, the 0.3 ohm pod needs at least 32W to run at its best, so it is not well suited to the Luxe X2 or any device with a maximum output below 40W. The 0.4, 0.6, and 0.8 ohm pods work well across all devices in the range. These pods are part of the Luxe X platform and are not compatible with XROS devices, which use a different pod connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCOREX 2.0 vs Original COREX Pods\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe COREX 2.0 pods replace the original Luxe X built-in coil pods. The main upgrades are the improved Morph Mesh heating element and better COREX Cotton wicking, which together produce cleaner flavour and a longer pod life before the taste deteriorates. The 0.6 and 0.8 ohm options also get a redesigned thinner mouthpiece that is more comfortable for MTL draws. The 0.3 ohm resistance is new to the COREX 2.0 range and was not available in the original Luxe X pods. If you have been using the original Luxe X pods, COREX 2.0 is a direct replacement that fits the same devices with no changes needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCOREX 2.0 Pods vs Luxe XR Pods with GTX Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Luxe X platform offers two types of pod: COREX 2.0 pods (built-in coil, swap the whole pod) and Luxe XR empty pods (replaceable GTX coil, swap only the coil). COREX 2.0 pods are simpler to maintain and better suited to vapers who prefer a no-fuss approach. Luxe XR pods with GTX coils give more flexibility because you can change between different GTX coil resistances without buying a new pod each time, which can be more cost-effective in the long run. Both pod types fit all Luxe X series devices. The choice comes down to whether you prefer simplicity (COREX 2.0) or versatility (Luxe XR with GTX coils).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid and Nicotine Recommendations by Resistance\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the 0.3 and 0.4 ohm DTL pods, high VG e-liquids of 70% VG or above are recommended with freebase nicotine at 3mg or 6mg. For the 0.6 ohm RDL pod, 50\/50 or 60\/40 VG\/PG e-liquids work well with either freebase nicotine at 6mg or nic salts at lower strengths. For the 0.8 ohm MTL pod, 50\/50 VG\/PG e-liquids and nicotine salts at 10mg or 20mg are the best match for a smooth, satisfying throat hit at low wattage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eFour Resistances: 0.3, 0.4, 0.6, and 0.8 Ohm\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe COREX 2.0 range covers DTL, RDL, and MTL vaping styles across four resistances. The 0.3 ohm pod (32 to 45W) is the lowest resistance option for full DTL vaping with large clouds and warm vapour. The 0.4 ohm pod (26 to 32W) sits between DTL and RDL for a slightly more relaxed draw with strong flavour. The 0.6 ohm pod (20 to 30W) is suited to RDL vaping with a moderate draw and good flavour clarity. The 0.8 ohm pod (12 to 20W) is designed for MTL vaping with the tightest draw in the range, closest to a cigarette-style pull.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCOREX 2.0 Heating Technology with Upgraded Morph Mesh\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCOREX 2.0 is Vaporesso's updated pod coil technology, featuring an improved Morph Mesh heating element and upgraded COREX Cotton wicking. The Morph Mesh structure heats e-liquid more evenly across the coil surface for better flavour accuracy from the first puff to the last. The improved COREX Cotton absorbs e-liquid faster and holds more of it against the mesh, which reduces the chance of dry hits and helps each pod last longer before the flavour starts to drop off. Vaporesso pairs COREX 2.0 with the AXON chipset in compatible devices for consistent power output throughout the life of the pod.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eTwo Mouthpiece Styles: Wide for DTL, Slim for MTL\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 0.3 and 0.4 ohm pods use a wider mouthpiece that allows more air to pass through, matching the open draw needed for DTL vaping. The 0.6 and 0.8 ohm pods have a thinner, narrower mouthpiece that Vaporesso redesigned specifically for the COREX 2.0 range. This slimmer profile sits more comfortably against the lips and restricts airflow naturally, which improves the feel of MTL and restricted DTL draws. The mouthpiece is built into each pod, so the correct style is always matched to the resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2ml Capacity with Bottom-Fill Silicone Stopper\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach pod holds 2ml of e-liquid (UK TPD compliant) and fills from the bottom through a silicone stopper. Remove the pod from your device, pull out the stopper, insert your bottle nozzle, and fill to just below the top of the port. Push the stopper back in firmly before refitting the pod. Take care not to overfill, as this can cause e-liquid to leak from the fill port when the stopper is replaced. The pods are made from transparent PCTG plastic, so you can check your e-liquid level at a glance without removing the pod.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSSS Leak-Resistant Technology\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVaporesso's SSS (Seal, Saturate, Store) technology uses three sealing points within the pod to keep e-liquid locked inside. The system maintains consistent internal pressure and prevents leaking through the fill port, airflow channels, and mouthpiece. While no pod is completely leak-proof, the SSS design significantly reduces mess during filling and day-to-day use. Storing the device upright when not in use further helps to keep e-liquid away from the airflow path.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eBuilt-In Mesh Coils with Plug-and-Play Pod Swap\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe coil is built into each COREX 2.0 pod and cannot be replaced separately. When the flavour drops off or you notice a burnt taste, swap the entire pod for a new one. This keeps maintenance simple: there is no coil to unscrew or install. Before your first vape on a new pod, fill it with e-liquid and leave it to soak for around five minutes so the wicking material can fully saturate. Starting at the lower end of the recommended wattage range for the first few draws helps the coil bed in and last longer.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCompatible with All Luxe X Series Devices\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Luxe X COREX 2.0 pods use the same magnetic connection as every device in the Luxe X family. They fit the Luxe X, Luxe X2, Luxe X Pro, Luxe XR, Luxe XR Max, and Luxe XR Max 2. However, the 0.3 ohm pod needs at least 32W to run at its best, so it is not well suited to the Luxe X2 or any device with a maximum output below 40W. The 0.4, 0.6, and 0.8 ohm pods work well across all devices in the range. These pods are part of the Luxe X platform and are not compatible with XROS devices, which use a different pod connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCOREX 2.0 vs Original COREX Pods\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe COREX 2.0 pods replace the original Luxe X built-in coil pods. The main upgrades are the improved Morph Mesh heating element and better COREX Cotton wicking, which together produce cleaner flavour and a longer pod life before the taste deteriorates. The 0.6 and 0.8 ohm options also get a redesigned thinner mouthpiece that is more comfortable for MTL draws. The 0.3 ohm resistance is new to the COREX 2.0 range and was not available in the original Luxe X pods. If you have been using the original Luxe X pods, COREX 2.0 is a direct replacement that fits the same devices with no changes needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eCOREX 2.0 Pods vs Luxe XR Pods with GTX Coils\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Luxe X platform offers two types of pod: COREX 2.0 pods (built-in coil, swap the whole pod) and Luxe XR empty pods (replaceable GTX coil, swap only the coil). COREX 2.0 pods are simpler to maintain and better suited to vapers who prefer a no-fuss approach. Luxe XR pods with GTX coils give more flexibility because you can change between different GTX coil resistances without buying a new pod each time, which can be more cost-effective in the long run. Both pod types fit all Luxe X series devices. The choice comes down to whether you prefer simplicity (COREX 2.0) or versatility (Luxe XR with GTX coils).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eE-Liquid and Nicotine Recommendations by Resistance\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor the 0.3 and 0.4 ohm DTL pods, high VG e-liquids of 70% VG or above are recommended with freebase nicotine at 3mg or 6mg. For the 0.6 ohm RDL pod, 50\/50 or 60\/40 VG\/PG e-liquids work well with either freebase nicotine at 6mg or nic salts at lower strengths. For the 0.8 ohm MTL pod, 50\/50 VG\/PG e-liquids and nicotine salts at 10mg or 20mg are the best match for a smooth, satisfying throat hit at low wattage.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eLuxe X COREX 2.0 Pod Variants\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.3 ohm DTL Mesh Pod\u003c\/strong\u003e (32 to 45W) with wide mouthpiece\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.4 ohm RDL\/DTL Mesh Pod\u003c\/strong\u003e (26 to 32W) with wide mouthpiece\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.6 ohm RDL Mesh Pod\u003c\/strong\u003e (20 to 30W) with slim mouthpiece\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e0.8 ohm MTL Mesh Pod \u003c\/strong\u003e(12 to 20W) with slim mouthpiece\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eWhat's in the Box\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e2 x Vaporesso Luxe X COREX 2.0 Mesh Pods (resistance as selected)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThese pods are not compatible with XROS devices. Always prime a new pod by filling it and leaving it to soak for five minutes before your first vape.\u003c\/span\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"0.3 Ohm","offer_id":41510358188106,"sku":null,"price":8.88,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm","offer_id":41510358220874,"sku":null,"price":8.88,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm","offer_id":41510358253642,"sku":null,"price":8.88,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm","offer_id":41510358286410,"sku":null,"price":8.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0260\/4790\/5866\/files\/vaporesso-coils-0-6-ohm-vaporesso-luxe-x-corex-2-0-pods-31790170177610.jpg?v=1726319945"}],"url":"https:\/\/www.vapeology.co.uk\/collections\/coils-pods.oembed?page=4","provider":"Vapeology","version":"1.0","type":"link"}